Hello,
En fait ça ne s'arrange pas ... 🙁
Je dois toujours accéder à la machine en connexion ssh.
Dès que les scripts de démarrage tentent de démarrer l'interface graphique c'est tout le système qui se fige.
CTRL-ALT-Fx ne marche même pas ...
En ssh j'ai récupéré les logs suivants:
---------------------------------------
lspci:
------
00:02.0 VGA compatible controller: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01) (prog-if 00 [VGA])
Subsystem: Compaq Computer Corporation: Unknown device 00b9
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f0000000 (32-bit, prefetchable)
Memory at fc400000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1
[root@luciole video]# pwd
/lib/modules/2.6.9-1.6_FC2/kernel/drivers/video
[root@luciole video]# ls
aty console i810 matrox riva tdfxfb.ko vga16fb.ko
cirrusfb.ko hgafb.ko kyro neofb.ko sstfb.ko tridentfb.ko vgastate.ko
[root@luciole video]# modprobe i810
[root@luciole video]# lsmod
Module Size Used by
i810 79813 0
--> Apparmement, le module se charge sans erreurs ...
Le fichier /var/log/messages au moment du plantage:
---------------------------------------------------
Dec 6 10:20:46 luciole init: Switching to runlevel: 0
Dec 6 10:20:46 luciole messagebus: messagebus -TERM succeeded
Dec 6 10:20:46 luciole atd: Arrêt de atd succeeded
Dec 6 10:20:46 luciole cups: Arrêt de cupsd succeeded
Dec 6 10:20:46 luciole xfs[2026]: terminating
Dec 6 10:20:46 luciole xfs: Arrêt de xfs succeeded
Dec 6 10:20:47 luciole gpm: Arrêt de gpm failed
Dec 6 10:20:47 luciole sshd: sshd -TERM succeeded
Dec 6 10:20:47 luciole sendmail: Arrêt de sendmail succeeded
Dec 6 10:20:47 luciole sendmail: Arrêt de sm-client succeeded
Dec 6 10:20:47 luciole smartd[1712]: smartd received signal 15: Terminated
Dec 6 10:20:47 luciole smartd[1712]: smartd is exiting (exit status 0)
"messages" [converti] 797L, 60967C 478,1 60%
Dec 6 10:22:01 luciole xinetd[1972]: Started working: 1 available service
Dec 6 10:22:01 luciole gpm: Démarrage de gpm succeeded
Dec 6 10:22:01 luciole crond: Démarrage de crond succeeded
Dec 6 10:22:02 luciole xfs: cannot establish any listening sockets
Dec 6 10:22:02 luciole xfs: Démarrage de xfs succeeded
Dec 6 10:22:02 luciole anacron: Démarrage de anacron succeeded
Dec 6 10:22:02 luciole atd: Démarrage de atd succeeded
Dec 6 10:22:02 luciole readahead: Démarrage de la réactivation en arrière plan :
Dec 6 10:22:02 luciole rc: Starting readahead: succeeded
Dec 6 10:22:02 luciole messagebus: Démarrage de messagebus succeeded
Dec 6 10:22:03 luciole mdmonitor: mdadm succeeded
Dec 6 10:22:03 luciole mdmpd: mdmpd failed
Dec 6 10:22:03 luciole init: open(/dev/pts/0): No such file or directory
Dec 6 10:22:03 luciole last message repeated 4 times
Dec 6 10:22:06 luciole kernel: mtrr: base(0xf0020000) is not aligned on a size(0x800000) boundary
Dec 6 10:22:13 luciole gdm[2362]: gdm_slave_xioerror_handlerà: erreur X fatale - Redémarrage de :0
Dec 6 10:22:15 luciole kernel: mtrr: base(0xf0020000) is not aligned on a size(0x800000) boundary
Dec 6 10:22:18 luciole gdm[2407]: gdm_slave_xioerror_handlerà: erreur X fatale - Redémarrage de :0
Dec 6 10:22:21 luciole kernel: mtrr: base(0xf0020000) is not aligned on a size(0x800000) boundary
Dec 6 10:22:28 luciole gdm[2470]: gdm_slave_xioerror_handlerà: erreur X fatale - Redémarrage de :0
Dec 6 10:22:31 luciole kernel: mtrr: base(0xf0020000) is not aligned on a size(0x800000) boundary
Dec 6 10:22:38 luciole gdm[2537]: gdm_slave_xioerror_handlerà: erreur X fatale - Redémarrage de :0
Dec 6 10:22:38 luciole gdm[2299]: deal_with_x_crashesà: exécution du script XKeepsCrashing
Dec 6 10:22:39 luciole gpm[2025]: *** info [mice.c(1766)]:
Dec 6 10:22:39 luciole gpm[2025]: imps2: Auto-detected intellimouse PS/2
Dec 6 10:22:47 luciole sshd(pam_unix)[2711]: session opened for user bej by (uid=500)
Dec 6 10:22:47 luciole sshd(pam_unix)[2711]: session opened for user bej by (uid=500)
Dec 6 10:22:56 luciole su(pam_unix)[2746]: session opened for user root by bej(uid=500)
Mon fichier /etc/X11/xorg.conf
------------------------------
[root@luciole X11]# cat xorg.conf
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr_CH"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "L565"
DisplaySize 340 270
HorizSync 24.0 - 81.0
VertRefresh 49.0 - 76.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "i810"
VendorName "Videocard vendor"
BoardName "Intel 845"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
[root@luciole X11]#
Le contenu de /var/X11/xorg.0log: (enfin, une partie...)
--------------------------------
...
...
...
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 8000 kB
(II) I810(0): VESA VBE OEM: Brookdale-G Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Brookdale-G Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Before: SWF1 is 0x00001108
(II) I810(0): After: SWF1 is 0x00001108
(==) I810(0): Default visual is TrueColor
(II) I810(0): Allocated 128 kB for the ring buffer at 0x0
(II) I810(0): Allocating at least 256 scanlines for pixmap cache
(II) I810(0): Initial framebuffer allocation size: 10240 kByte
(II) I810(0): Allocated 4 kB for HW cursor at 0x7fff000
(II) I810(0): Allocated 4 kB for Overlay registers at 0x7ffe000 (0x1c4a1000).
(II) I810(0): Allocated 64 kB for the scratch buffer at 0x7fee000
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmGetBusid returned ''
(II) I810(0): [drm] created "i830" driver at busid "PCI:0:2:0"
(II) I810(0): [drm] added 8192 byte SAREA at 0x22022000
(II) I810(0): [drm] mapped SAREA 0x22022000 to 0xf6ef7000
(II) I810(0): [drm] framebuffer handle = 0xf0020000
(II) I810(0): [drm] added 1 reserved context for kernel
(II) I810(0): Allocated 8192 kB for the back buffer at 0x7000000.
(II) I810(0): Allocated 8192 kB for the depth buffer at 0x6800000.
(II) I810(0): Allocated 32 kB for the logical context at 0x67f8000.
(II) I810(0): Allocated 1024 kB for the DMA buffers at 0x66f8000.
(II) I810(0): Allocated 4864 kB for textures at 0x6238000
(II) I810(0): Updated framebuffer allocation size from 10240 to 10264 kByte
(II) I810(0): Updated pixmap cache from 256 scanlines to 259 scanlines
(II) I810(0): 0x99c698c: Memory at offset 0x00020000, size 10264 kBytes
(II) I810(0): 0x99c69ac: Memory at offset 0x07fff000, size 4 kBytes
(II) I810(0): 0x99c69d0: Memory at offset 0x00000000, size 128 kBytes
(II) I810(0): 0x99c6a00: Memory at offset 0x07fee000, size 64 kBytes
(II) I810(0): 0x99c6a20: Memory at offset 0x07ffe000, size 4 kBytes
(II) I810(0): 0x99c6a40: Memory at offset 0x07000000, size 8192 kBytes
(II) I810(0): 0x99c6a60: Memory at offset 0x06800000, size 8192 kBytes
(II) I810(0): 0x99c6ac0: Memory at offset 0x067f8000, size 32 kBytes
(II) I810(0): 0x99c6aa0: Memory at offset 0x066f8000, size 1024 kBytes
(II) I810(0): 0x99c6a80: Memory at offset 0x06238000, size 4864 kBytes
(II) I810(0): Activating tiled memory for the back buffer.
(II) I810(0): Activating tiled memory for the depth buffer.
(II) I810(0): [drm] Registers = 0xfc400000
(II) I810(0): [drm] Back Buffer = 0xf7000000
(II) I810(0): [drm] Depth Buffer = 0xf6800000
(II) I810(0): [drm] DMA Buffers = 0xf66f8000
(II) I810(0): [drm] ring buffer = 0xf0000000
(II) I810(0): [drm] textures = 0xf6238000
(II) I810(0): [drm] added 256 4096 byte DMA buffers
(II) I810(0): [drm] dma control initialized, using IRQ -1007
(II) I810(0): [dri] visual configs initialized
(==) I810(0): Write-combining range (0xf0000000,0x8000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): xf86BindGARTMemory: bind key 8 at 0x007df000 (pgoffset 2015)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x07fee000 (pgoffset 32750)
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x07ffe000 (pgoffset 32766)
(II) I810(0): xf86BindGARTMemory: bind key 3 at 0x07000000 (pgoffset 28672)
(II) I810(0): xf86BindGARTMemory: bind key 4 at 0x06800000 (pgoffset 26624)
(II) I810(0): xf86BindGARTMemory: bind key 5 at 0x067f8000 (pgoffset 26616)
(II) I810(0): xf86BindGARTMemory: bind key 6 at 0x066f8000 (pgoffset 26360)
(II) I810(0): xf86BindGARTMemory: bind key 7 at 0x06238000 (pgoffset 25144)
(WW) I810(0): PGTBL_ER is 0x00000049
(WW) I810(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled
(II) I810(0): Before: SWF1 is 0x00001108
(II) I810(0): After: SWF1 is 0x00001108
(II) I810(0): Display plane A is enabled.
(II) I810(0): Display plane B is disabled.
(II) I810(0): PIPEACONF is 0x80000000
(WW) I810(0): Correcting plane A stride (1280 -> 2048)
(II) I810(0): Mode bandwidth is 98 Mpixel/s
(II) I810(0): maxBandwidth is 640 Mbyte/s, pipe bandwidths are 524 Mbyte/s, 0 Mbyte/s
(WW) I810(0): Extended BIOS function 0x5f61 not supported.
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
12 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(II) I810(0): Initializing HW Cursor
(**) Option "dpms"
(**) I810(0): DPMS enabled
(II) I810(0): X context handle = 0x00000001
(II) I810(0): [drm] installed DRM signal handler
(II) I810(0): [DRI] installation complete
(II) I810(0): direct rendering: Enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "IMPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "yes"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "fr_CH"
(**) Keyboard0: XkbLayout: "fr_CH"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
Please consult the The X.Org Foundation support
at
http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
FatalError re-entered, aborting
Caught signal 11. Server aborting
Les processes restant de la tentative de démarrage de X:
--------------------------------------------------------
[root@luciole X11]# ps -ef | grep X
root 2622 2299 0 10:22 ? 00:00:00 /bin/sh /etc/X11/gdm/XKeepsCrashing
root 2639 2622 0 10:22 ? 00:00:00 /usr/libexec/gdmopen -l /bin/sh -c /etc/X11/gdm/XKeepsCrashing -noopen
root 2650 2639 0 10:22 tty7 00:00:00 /bin/sh /etc/X11/gdm/XKeepsCrashing -noopen
root 2708 2650 0 10:22 tty7 00:00:00 /usr/bin/dialog --yesno Je ne peux pas démarrer le serveur X (l'interface graphique). Il n'est probablement pas configuré correctement. Voulez-vous voir ce que le serveur X a affiché pour déterminer le problème ? 10 50
root 2794 2747 0 10:35 pts/1 00:00:00 grep X
[root@luciole X11]#
Le message "Fatal server error" indique souvent une erreur de configuration du serveur X mais elle n'a pas changé
depuis l'installation initiale du système, mis à part :
[root@luciole X11]# diff xorg.conf xorg.conf.backup
60c60
< Driver "kbd"
---
> Driver "keyboard"
[root@luciole X11]#
L'interface de boot graphique qui montre le passage des init scripts s'affiche normalement et ensuite
c'est noir comme dans un tunnel 🙁
Une idée ?
Merci et A+
Jabba
