salut Kwizart !
j'ai toujours quelque probleme pour configurer mon matériel tout d'abord pour " RutilT " et le " service network " je possêde 2 périphéries reseaux sans fil ' wlan0 " et " wmaster0 " ceci est peut etre du au fait que j'ai voulu toucher a tout ça tout seul ?
si j'essaye d'activer ' wmaster0 " j'ai un message au demarrage :
'
Activation de l'interface wmaster0 : Error for wireless request "Set Encode" (8B2A) :
SET failed on device wmaster0 ; Operation not supported.
Définition des informations IP pour wmaster0.
'
si j'utiliser wlan0 pour créer un nouveau reseau sans fil (via RutilT) au moment ou je veux appliquer le nouveau profile le pc fige et je suis obligé de redemarrer .
RutilT refuse de se lancer pour le peripherie qui s'appel wmaster0 il me met un message d'erreur :
'
Critical error :
Can't get access point Mac address.
Code : 95
'
voila des infos qui me sont retourné par les commandes :
- lsmod :
'
Module Size Used by
autofs4 25797 2
hidp 24513 2
rfcomm 47065 0
l2cap 32065 10 hidp,rfcomm
bluetooth 62245 5 hidp,rfcomm,l2cap
sunrpc 166013 1
ip_conntrack_netbios_ns 7105 0
ipt_REJECT 8769 1
xt_state 6337 2
ip_conntrack 57209 2 ip_conntrack_netbios_ns,xt_state
nfnetlink 11353 1 ip_conntrack
iptable_filter 7233 1
ip_tables 17541 1 iptable_filter
ip6t_REJECT 9665 1
xt_tcpudp 7233 9
ip6table_filter 6977 1
ip6_tables 18693 1 ip6table_filter
x_tables 19909 6 ipt_REJECT,xt_state,ip_tables,ip6t_REJECT,xt_tcpudp,ip6_tables
dm_multipath 23241 0
video 21061 0
sbs 20097 0
i2c_ec 9281 1 sbs
button 10961 0
battery 14533 0
asus_acpi 20825 0
ac 9541 0
ipv6 276481 17 ip6t_REJECT
lp 16905 0
bt878 15273 0
snd_bt87x 19813 0
tuner 63221 0
floppy 61477 0
snd_intel8x0 37085 1
snd_ac97_codec 99813 1 snd_intel8x0
snd_ac97_bus 6593 1 snd_ac97_codec
snd_seq_dummy 8133 0
snd_seq_oss 37057 0
snd_seq_midi_event 11841 1 snd_seq_oss
snd_seq 57009 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 46433 0
bttv 179061 1 bt878
video_buf 29381 1 bttv
ir_common 33605 1 bttv
compat_ioctl32 5569 1 bttv
i2c_algo_bit 12105 1 bttv
btcx_risc 9161 1 bttv
tveeprom 18513 1 bttv
k8_edac 18689 0
arc4 6337 2
snd_mixer_oss 20545 1 snd_pcm_oss
videodev 28993 1 bttv
snd_pcm 80965 4 snd_bt87x,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
pcspkr 7361 0
ecb 8001 2
sg 38877 0
edac_mc 27081 1 k8_edac
v4l1_compat 16453 1 videodev
forcedeth 47941 0
i2c_nforce2 11457 0
blkcipher 10049 1 ecb
i2c_core 26049 6 i2c_ec,tuner,bttv,i2c_algo_bit,tveeprom,i2c_nforce2
v4l2_common 26305 3 tuner,bttv,videodev
rc80211_simple 9216 1
rt61pci 39428 0
80211 167692 2 rc80211_simple,rt61pci
rt2x00debug 8580 1 rt61pci
eeprom_93cx6 7552 1 rt61pci
parport_pc 31205 1
rfkill 12932 2 rt61pci
crc_itu_t 6272 1 rt61pci
parport 40841 2 lp,parport_pc
snd_timer 26693 2 snd_seq,snd_pcm
k8temp 9793 0
hwmon 7621 1 k8temp
snd_page_alloc 14281 3 snd_bt87x,snd_intel8x0,snd_pcm
ide_cd 42593 0
snd_mpu401 12777 0
snd_mpu401_uart 13249 1 snd_mpu401
snd_rawmidi 28481 1 snd_mpu401_uart
snd_seq_device 12365 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd 58181 15 snd_bt87x,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 12193 1 snd
serio_raw 11333 0
ns558 9281 0
cdrom 38753 1 ide_cd
gameport 20297 2 ns558
usblp 18881 0
usb_storage 74017 0
dm_snapshot 22513 0
dm_zero 6337 0
dm_mirror 26897 0
dm_mod 63321 9 dm_multipath,dm_snapshot,dm_zero,dm_mirror
sata_nv 15941 2
libata 109273 1 sata_nv
sd_mod 25025 3
scsi_mod 141805 4 sg,usb_storage,libata,sd_mod
ext3 136905 2
jbd 65001 1 ext3
ehci_hcd 35661 0
ohci_hcd 25433 0
uhci_hcd 28237 0
'
-dmesg | grep rt:
'
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Enabling unmasked SIMD FPU exception support... done.
virtual kernel memory layout:
SELinux: Starting in permissive mode
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
pnp: 00:01: ioport range 0x4400-0x447f has been reserved
pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:01: ioport range 0x4800-0x487f has been reserved
pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
hub 1-0:1.0: 10 ports detected
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 2-0:1.0: 10 ports detected
kjournald starting. Commit interval 5 seconds
USB Mass Storage support registered.
gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 890kHz
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Loading module: rt61pci - CVS (N/A) by
http://rt2x00.serialmonkey.com.
input: rfkill rt61pci as /class/input/input3
lp0: using parport0 (interrupt-driven).
kjournald starting. Commit interval 5 seconds
wlan0: starting scan
rt61pci->rt61pci_init_bbp: Error - BBP register access failed, aborting.
rt61pci->rt61pci_enable_radio: Error - Register initialization failed.
wlan0: starting scan
wlan0: starting scan
wlan0: starting scan
wlan0: starting scan
rt61pci->rt61pci_init_bbp: Error - BBP register access failed, aborting.
rt61pci->rt61pci_enable_radio: Error - Register initialization failed.
wlan0: starting scan
wlan0: starting scan
wlan0: starting scan
wlan0: starting scan
wlan0: starting scan
wlan0: starting scan
wlan0: starting scan
wlan0: starting scan
'
-ls /lib/firmware:
'
ipw2200-2.4-LICENSE ipw2200-ibss.fw ipw-2.4-bss.fw ipw-2.4-ibss_ucode.fw rt2561.bin
ipw2200-3.0-LICENSE ipw2200-sniffer.fw ipw-2.4-bss_ucode.fw ipw-2.4-sniffer.fw rt2561s.bin
ipw2200-bss.fw ipw-2.4-boot.fw ipw-2.4-ibss.fw ipw-2.4-sniffer_ucode.fw rt2661.bin
'
-cat /etc/modprobe.conf /etc/modprobe.d/rt*:
'
alias eth0 forcedeth
alias scsi_hostadapter sata_nv
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-intel8x0
alias snd-card-1 snd-mpu401
options snd-card-1 index=1
options snd-mpu401 index=1
remove snd-mpu401 { /usr/sbin/alsactl store 1 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-mpu401
alias wmaster0 rt61pci
cat: /etc/modprobe.d/rt*: Aucun fichier ou répertoire de ce type
'
-iwconfig:
'
lo no wireless extensions.
wmaster0 IEEE 802.11b Frequency:2.412 GHz
RTS thr:off Fragment thr=2346 B
wlan0 IEEE 802.11b ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
RTS thr:off Fragment thr=2346 B
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
eth0 no wireless extensions.
'
-ifconfig -a:
'
eth0 Link encap:Ethernet HWaddr 00:15:F2:84:1C:42
inet adr:192.168.0.11 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::215:f2ff:fe84:1c42/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:798 errors:0 dropped:0 overruns:0 frame:0
TX packets:997 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:473501 (462.4 KiB) TX bytes:159894 (156.1 KiB)
Interruption:16 Adresse de base:0x8000
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3264 errors:0 dropped:0 overruns:0 frame:0
TX packets:3264 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:7088108 (6.7 MiB) TX bytes:7088108 (6.7 MiB)
wlan0 Link encap:Ethernet HWaddr 00:13:D3:85:52:66
UP RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:0 (0.0 b) TX bytes:9826 (9.5 KiB)
Adresse de base:0x3000
wmaster0 Link encap:UNSPEC HWaddr 00-13-D3-85-52-66-88-7D-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Adresse de base:0x3000
'
