Bonjour je viens d'installer Fedora Core 6 et je souhaiterait installer mon modem ADSL USB Olitec v3 (de chez Tiscali) basée sur le chipset Conexant AccessRunner. Dans le mode d'emploi y a une installation deu modem pour redhat 7.3 ou 8 donc j'ai suivi ces instructions puisque apparemment Fedora est basée sur Red Hat
Notice wrote:Vérifier que les paquetages ci-dessous soient bien installés :
kernel-source
gcc
make
Pour vérifier qu'un paquetage est installer, tapez la commande rpm -q nomdupackage
J'ai fait et il manque juste
kernel-source mais apparemment c'est un vieux paquet
[Fabien@localhost ~]$ rpm -q make
make-3.81-1.1
[Fabien@localhost ~]$ rpm -q gcc
gcc-4.1.1-30
Notice wrote:Enregistrer le pilote dans un dossier temporaire sur votre disque dur, exemple : "
/home/", puis décompressez ce dernier :
Sous terminal, tapez :
tar zxvpf USBADSLV150-1008fr.tar.gz
Un répertoire nommé
USBADSL a été créé, tapez :
cd USBADSL
J'ai fait tout ça et ça marche :
[Fabien@localhost ~]$ tar zxvpf USBADSLV150-1008fr.tar.gz
USBADSL/
USBADSL/BlDefs.h
USBADSL/BlSrv.c
USBADSL/hsbusb.c
USBADSL/FwInit.c
USBADSL/customer.h
USBADSL/dhcpcd
USBADSL/FwInit.h
USBADSL/hasbani.h
USBADSL/hsbeth.c
USBADSL/ioctl.c
USBADSL/Makefile
USBADSL/ntdef.h
USBADSL/SndRcv.c
USBADSL/SndRcv.h
USBADSL/usbsndcm.c
USBADSL/usbsndcm.h
USBADSL/usb-uhci.h
USBADSL/version
USBADSL/WBoot.hex
USBADSL/cnxthsb
USBADSL/CnxE2Fw.bin
USBADSL/Manuel.pdf
[Fabien@localhost ~]$ cd USBADSL
[Fabien@localhost USBADSL]$
Notice wrote:Tapez make
Suite à cela, vérifiez que le fichier e2.o a bien été créé dans le répertoire USBADSL. Sinon, des erreurs ont du se produire lors de la compilation.
[Fabien@localhost USBADSL]$ make
gcc -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -fno-strength-reduce -DCPU=686 -march=i686 -DMODULE -D__KERNEL__ -DLINUX -I/lib/modules/`uname -r`/build/include -c usbsndcm.c -o usbsndcm.o
In file included from /lib/modules/2.6.18-1.2798.fc6/build/include/asm/thread_info.h:16,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/thread_info.h:21,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/preempt.h:9,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/spinlock.h:49,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/mmzone.h:7,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/gfp.h:4,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/slab.h:14,
from hasbani.h:28,
from usbsndcm.c:20:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/processor.h:80: erreur: ‘CONFIG_X86_L1_CACHE_SHIFT’ undeclared here (not in a function)
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/processor.h:80: erreur: l'alignement demandé n'est pas une constante
In file included from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/rwsem.h:24,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/notifier.h:14,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/memory_hotplug.h:7,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/mmzone.h:343,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/gfp.h:4,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/slab.h:14,
from hasbani.h:28,
from usbsndcm.c:20:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/rwsem.h: In function ‘__down_read’:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/rwsem.h:104: erreur: expected ‘:’ or ‘)’ before ‘KBUILD_BASENAME’
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/rwsem.h: In function ‘__down_write_nested’:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/rwsem.h:156: erreur: expected ‘:’ or ‘)’ before ‘KBUILD_BASENAME’
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/rwsem.h: In function ‘__up_read’:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/rwsem.h:198: erreur: expected ‘:’ or ‘)’ before ‘KBUILD_BASENAME’
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/rwsem.h: In function ‘__up_write’:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/rwsem.h:224: erreur: expected ‘:’ or ‘)’ before ‘KBUILD_BASENAME’
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/rwsem.h: In function ‘__downgrade_write’:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/rwsem.h:249: erreur: expected ‘:’ or ‘)’ before ‘KBUILD_BASENAME’
Dans le fichier inclus à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/linux/sched.h:49,
à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/asm/irq.h:13,
à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/linux/irq.h:22,
à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/asm/hardirq.h:5,
à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/linux/hardirq.h:7,
à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/linux/delay.h:13,
à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/linux/usb.h:14,
à partir de hasbani.h:29,
à partir de usbsndcm.c:20:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:33:3: erreur: #error You lose.
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:210:31: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:254:46: erreur: division par zéro dans #if
In file included from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/sched.h:49,
from /lib/modules/2.6.18-1.2798.fc6/build/include/asm/irq.h:13,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/irq.h:22,
from /lib/modules/2.6.18-1.2798.fc6/build/include/asm/hardirq.h:5,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/hardirq.h:7,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/delay.h:13,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/usb.h:14,
from hasbani.h:29,
from usbsndcm.c:20:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h: In function ‘jiffies_to_msecs’:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:259: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:259: erreur: (Each undeclared identifier is reported only once
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:259: erreur: for each function it appears in.)
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:265:46: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h: In function ‘jiffies_to_usecs’:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:270: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:278:46: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h: In function ‘msecs_to_jiffies’:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:283: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:291:46: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h: In function ‘usecs_to_jiffies’:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:296: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h: In function ‘timespec_to_jiffies’:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:315: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:321: erreur: ‘SHIFT_HZ’ undeclared (first use in this function)
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h: In function ‘jiffies_to_timespec’:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:334: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h: In function ‘timeval_to_jiffies’:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:356: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:360: erreur: ‘SHIFT_HZ’ undeclared (first use in this function)
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h: In function ‘jiffies_to_timeval’:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:372: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:385:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h: In function ‘jiffies_to_clock_t’:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:386: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h: In function ‘clock_t_to_jiffies’:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:397: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:416:6: erreur: division par zéro dans #if
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h: In function ‘jiffies_64_to_clock_t’:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/jiffies.h:417: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
In file included from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/sched.h:57,
from /lib/modules/2.6.18-1.2798.fc6/build/include/asm/irq.h:13,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/irq.h:22,
from /lib/modules/2.6.18-1.2798.fc6/build/include/asm/hardirq.h:5,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/hardirq.h:7,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/delay.h:13,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/usb.h:14,
from hasbani.h:29,
from usbsndcm.c:20:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/semaphore.h: In function ‘down’:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/semaphore.h:105: erreur: expected ‘:’ or ‘)’ before ‘KBUILD_BASENAME’
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/semaphore.h: In function ‘down_interruptible’:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/semaphore.h:130: erreur: expected ‘:’ or ‘)’ before ‘KBUILD_BASENAME’
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/semaphore.h: In function ‘down_trylock’:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/semaphore.h:155: erreur: expected ‘:’ or ‘)’ before ‘KBUILD_BASENAME’
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/semaphore.h: In function ‘up’:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/semaphore.h:179: erreur: expected ‘:’ or ‘)’ before ‘KBUILD_BASENAME’
Dans le fichier inclus à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/linux/irq.h:22,
à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/asm/hardirq.h:5,
à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/linux/hardirq.h:7,
à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/linux/delay.h:13,
à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/linux/usb.h:14,
à partir de hasbani.h:29,
à partir de usbsndcm.c:20:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/irq.h:15:25: erreur: irq_vectors.h : Aucun fichier ou répertoire de ce type
In file included from /lib/modules/2.6.18-1.2798.fc6/build/include/asm/hardirq.h:5,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/hardirq.h:7,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/delay.h:13,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/usb.h:14,
from hasbani.h:29,
from usbsndcm.c:20:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/irq.h: Hors de toute fonction :
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/irq.h:167: erreur: l'alignement demandé n'est pas une constante
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/irq.h:169: erreur: ‘NR_IRQS’ undeclared here (not in a function)
In file included from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/irq.h:182,
from /lib/modules/2.6.18-1.2798.fc6/build/include/asm/hardirq.h:5,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/hardirq.h:7,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/delay.h:13,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/usb.h:14,
from hasbani.h:29,
from usbsndcm.c:20:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/hw_irq.h:31: erreur: ‘NR_IRQ_VECTORS’ undeclared here (not in a function)
In file included from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/hardirq.h:7,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/delay.h:13,
from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/usb.h:14,
from hasbani.h:29,
from usbsndcm.c:20:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/hardirq.h:12: erreur: l'alignement demandé n'est pas une constante
Dans le fichier inclus à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/linux/module.h:22,
à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/linux/device.h:19,
à partir de /lib/modules/2.6.18-1.2798.fc6/build/include/linux/usb.h:18,
à partir de hasbani.h:29,
à partir de usbsndcm.c:20:
/lib/modules/2.6.18-1.2798.fc6/build/include/asm/module.h:65:2: erreur: #error unknown processor family
In file included from /lib/modules/2.6.18-1.2798.fc6/build/include/linux/skbuff.h:25,
from hasbani.h:32,
from usbsndcm.c:20:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/mm.h: In function ‘lowmem_page_address’:
/lib/modules/2.6.18-1.2798.fc6/build/include/linux/mm.h:535: erreur: ‘CONFIG_PAGE_OFFSET’ undeclared (first use in this function)
In file included from usbsndcm.c:20:
hasbani.h: Hors de toute fonction :
hasbani.h:56: erreur: expected specifier-qualifier-list before ‘purb_t’
hasbani.h:82: erreur: expected specifier-qualifier-list before ‘urb_t’
usbsndcm.c:29: erreur: expected ‘)’ before ‘*’ token
usbsndcm.c:30: erreur: expected ‘)’ before ‘*’ token
usbsndcm.c: In function ‘CmCommandRcv’:
usbsndcm.c:179: erreur: ‘BlReadTransactionComplete’ undeclared (first use in this function)
usbsndcm.c:184: attention : ‘sleep_on_timeout’ is deprecated (declared at /lib/modules/2.6.18-1.2798.fc6/build/include/linux/wait.h:364)
usbsndcm.c:184: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
usbsndcm.c: In function ‘CmCommandSend’:
usbsndcm.c:233: erreur: ‘struct hsb_usb_device’ has no member named ‘bDldError’
usbsndcm.c:252: erreur: ‘BlTransactionComplete’ undeclared (first use in this function)
usbsndcm.c:259: attention : ‘sleep_on_timeout’ is deprecated (declared at /lib/modules/2.6.18-1.2798.fc6/build/include/linux/wait.h:364)
usbsndcm.c:259: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
usbsndcm.c: In function ‘CmPacketSend’:
usbsndcm.c:300: erreur: ‘struct hsb_usb_device’ has no member named ‘bDldError’
usbsndcm.c:321: erreur: ‘BlTransactionComplete’ undeclared (first use in this function)
usbsndcm.c:327: attention : ‘sleep_on_timeout’ is deprecated (declared at /lib/modules/2.6.18-1.2798.fc6/build/include/linux/wait.h:364)
usbsndcm.c:327: erreur: ‘CONFIG_HZ’ undeclared (first use in this function)
make: *** [usbsndcm.o] Erreur 1
[Fabien@localhost USBADSL]$
Ca me faisait exactement la même erreur avec Ubuntu. Savez-vous d'où vient cette erreur, merci d'avance.
P.S; : Y a peut-être des caractères spéciaux qu'on mal été encodé. Dsl
