Fedora-Fr

Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

Paramètrer la connexion et le réseau sans fil...

neidged6bels

Bonjour à tous, voilà je je ne sais pas comment faire pour paramètre la connexion et le réseau sans fil. C'est en plus assez embêtant d'aller chercher les infos sur Windows et rebooter sur liux surtout quand c'est pour rien donc voilà...
J'ai un portable Sony VAIO PCG-9P6M . Voilà ce que j'ai comme comme cartes réseau depuis le gestionnaire de périphériques windows :

Carte réseau 1394
LAN-Express AS IEEE 802.11g miniPCI Adapter
Realtek RTL8139/810x Family Fast Ethernet NIC

Voilà si vous voulez d'autres informations n'hésitez pas à demander.

Je précise bien que je ne connaît absolument rien à Linux :-°

Merci de votre aide
d6bels

kwizart

Tu as deja installé linux?

Si c'est le cas entre dans un termianl et fait:
su -
lspci -n
et donnes nous le résulat!

En général il est plus facile de configurer le wifi depuis une connection internet branché en ethernet bien qu'il soit possible de le faire sans depuis un autre poste...

neidged6bels

Merci beaucoup de ta réponse rapide kwizart et désolé pour la lenteur de la mienne 😉 (Les cours ...)
Je viens de faire ce que tu m'as dis et voilà le résultat :

[neidged6bels@192 ~]$ su -
Mot de passe :
[root@192 ~]# lspci -n
00:00.0 0600: 1002:cbb2 (rev 02)
00:01.0 0604: 1002:7010
00:03.0 0703: 10b9:5457
00:04.0 0401: 10b9:5451 (rev 02)
00:06.0 0680: 10b9:7101
00:07.0 0601: 10b9:1533
00:09.0 0200: 168c:0013 (rev 01)
00:0a.0 0607: 104c:ac8e
00:0a.2 0c00: 104c:802e
00:0a.3 0180: 104c:ac8f
00:0c.0 0c03: 1033:0035 (rev 43)
00:0c.1 0c03: 1033:0035 (rev 43)
00:0c.2 0c03: 1033:00e0 (rev 04)
00:0f.0 0101: 10b9:5229 (rev c4)
00:12.0 0200: 10ec:8139 (rev 10)
01:05.0 0300: 1002:4337
[root@192 ~]#

kwizart

Sous windows tu utilises les pilotes et driver intel, tu as un processeur centrino???
Voir la page d'acceuil du support de ton portable?
De quand date l'acaht de ce matériel?

Je table sur du ipw3945 voire ipw2200/2915 si + ancien, dans ce denriers cas, tu devrais avoir un module ipw2200 de chargé lorsque tu fais:
su -
dmesg | grep ipw

neidged6bels

Alors comme processeur j'ai un Mobile Intel Pentium 4 cadencé à 2.80GHz. L'achat de l'ordi est du 10 mai 2004.
Pour la fin de ton message j'ai pas tout compris. Je tape ça dans le Terminal et je poste aussi ce que ça me dit ??
Sinon très simplement à quoi correspondent ces lignes de commande ??
Merci

kwizart

effectivment c'est à faire dans un terminal...
il faut passer en root (su - ) mais à vrai dire ce n'est pas nécéssaire dans ce cas
dmesg | grep ipw

Je pense qu'il s'agit plus d'une ipw2100 (mais pas sur!) dans ce cas il faut que tu télécharge le firmware...
Tu aurais la page de support des drivers sur le site de sony?

Pikachu_2014

C'est marrant les devinettes, mais est-ce qu'un bête "/sbin/lspci" (même pas en root) n'eut pas été plus simple pour savoir à quel ipw on a affaire ?
Zum Beispiel :
$ /sbin/lspci
...
0000:06:03.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
...

neidged6bels

Bon là je sais pas ce qui c'est passé dmesg | grep ipw je suis pas arrivé à avoir quelque chose avec | grep ipw.
Sinon pour $ /sbin/lspci j'ai du aussi mal m'y prendre mais rien ne s'affichait ... Bon voilà ce que j'ai quand même réussi à avoir :

[neidged6bels@192 ~]$ su -
Mot de passe :
[root@192 ~]# dmesg
Linux version 2.6.18-1.2798.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:37:32 EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bf70000 (usable)
BIOS-e820: 000000003bf70000 - 000000003bf7f000 (ACPI data)
BIOS-e820: 000000003bf7f000 - 000000003bf80000 (ACPI NVS)
BIOS-e820: 000000003bf80000 - 000000003c000000 (reserved)
BIOS-e820: 000000004bf80000 - 000000004c000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
63MB HIGHMEM available.
896MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 245616
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 16240 pages, LIFO batch:3
DMI present.
Using APIC driver default
ACPI: RSDP (v000 PTLTD ) @ 0x000f6fc0
ACPI: RSDT (v001 SONY K7 0x06040000 LTP 0x00000000) @ 0x3bf7a41a
ACPI: FADT (v001 SONY K7 0x06040000 PTL 0x000f4240) @ 0x3bf7ef64
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3bf7efd8
ACPI: SSDT (v001 INTEL EISTRef 0x00002000 INTL 0x20030224) @ 0x3bf7a44a
ACPI: DSDT (v001 SONY K7 0x06040000 MSFT 0x0100000e) @ 0x00000000
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 50000000 (gap: 4c000000:b3f80000)
Detected 2791.175 MHz processor.
Built 1 zonelists. Total pages: 245616
Kernel command line: ro root=LABEL=/ rhgb quiet
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0178f000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07ae000 soft=c078e000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 967464k/982464k available (2138k kernel code, 14268k reserved, 868k data, 240k init, 64960k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5586.44 BogoMIPS (lpj=11172880)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebf1ff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0c00)
CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=424 bytes
sizeof(dentry)=148 bytes
sizeof(ext3inode)=600 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes
sizeof(task_struct)=1392 bytes
checking if image is initramfs... it is
Freeing initrd memory: 1352k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd890, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 8000-803f claimed by ali7101 ACPI
PCI quirk: region 8040-805f claimed by ali7101 SMB
Boot video device is 0000:01:05.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 4) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3) *11
ACPI: PCI Interrupt Link [LNK2] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNK3] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 6) *10
ACPI: PCI Interrupt Link [LNK5] (IRQs *11)
ACPI: PCI Interrupt Link [LNK6] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 9) *11
ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 7 10 *11)
ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode.
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PPB_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:05: ioport range 0x40b-0x40b has been reserved
pnp: 00:05: ioport range 0x480-0x48f has been reserved
pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:05: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:05: ioport range 0x8000-0x807f could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: a000-afff
MEM window: e0300000-e03fffff
PREFETCH window: f0000000-f7ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
IO window: 00001400-000014ff
IO window: 00001800-000018ff
PREFETCH window: 50000000-51ffffff
MEM window: 52000000-53ffffff
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNK0] -> GSI 4 (level, low) -> IRQ 4
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x35 set to 0x1
speedstep-smi: you're trying to use this cpufreq driver on a Pentium 4-based CPU. Most likely it will not work.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1163574824.512:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 8BDC589434DBC709
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Activating ISA DMA hang workarounds.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [TZ01] (56 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected Ati IGP345M chipset
agpgart: AGP aperture is 128M @ 0xe8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNK6] -> GSI 9 (level, low) -> IRQ 9
0000:00:03.0: ttyS0 at I/O 0x1028 (irq = 9) is a 8250
0000:00:03.0: ttyS1 at I/O 0x1040 (irq = 9) is a 8250
0000:00:03.0: ttyS2 at I/O 0x1050 (irq = 9) is a 8250
0000:00:03.0: ttyS3 at I/O 0x1060 (irq = 9) is a 8250
Couldn't register serial port 0000:00:03.0: -28
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:0f.0
ACPI: Unable to derive IRQ for device 0000:00:0f.0
ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N040ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QSI CD-RW/DVD-ROM SBW242U, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 >
ide-floppy driver 0.99.newide
Yenta: CardBus bridge found at 0000:00:0a.0 [104d:8175]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x000a1b22, devctl 0x64
Yenta: ISA IRQ mask 0x0ce8, PCI irq 4
Socket status: 30000006
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 240k freed
Write protecting the kernel read-only data: 386k
Time: tsc clocksource has been installed.
Time: acpi_pm clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:0c.0: OHCI Host Controller
ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0c.0: irq 10, io mem 0xe0009000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.1 -> Link [LNK4] -> GSI 6 (level, low) -> IRQ 6
ohci_hcd 0000:00:0c.1: OHCI Host Controller
ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0c.1: irq 6, io mem 0xe000a000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.2[C] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:0c.2: EHCI Host Controller
ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:0c.2: irq 11, io mem 0xe000b800
ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x256eb1, caps: 0xa04753/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input1
ohci_hcd 0000:00:0c.1: wakeup
ohci_hcd 0000:00:0c.0: wakeup
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
input: USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:0c.1-1
input: USB Keyboard as /class/input/input3
input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:0c.1-1
usb 1-2: new low speed USB device using ohci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input4
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0c.0-2
audit(1163574832.368:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1560 types, 166 bools, 1 sens, 1024 cats
security: 58 classes, 48173 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hda7, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1163574832.772:3): policy loaded auid=4294967295
input: PC Speaker as /class/input/input5
ali15x3_smbus 0000:00:06.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
ali15x3_smbus 0000:00:06.0: ALI15X3 not detected, module not inserted.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNK1] -> GSI 3 (level, low) -> IRQ 3
eth0: RealTek RTL8139 at 0xf8894c00, 08:00:46:cf:49:b9, IRQ 3
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ieee1394: Initialized config rom entry `ip1394'
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:0a.2[C] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e000b000-e000b7ff] Max Packet=[2048] IR/IT contexts=[4/8]
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNK7] -> GSI 9 (level, low) -> IRQ 9
Floppy drive(s): fd0 is 1.44M
IRQ handler type mismatch for IRQ 6
[<c04051db>] dump_trace+0x69/0x1af
[<c0405339>] show_trace_log_lvl+0x18/0x2c
[<c04058ed>] show_trace+0xf/0x11
[<c04059ea>] dump_stack+0x15/0x17
[<c044e253>] setup_irq+0x175/0x188
[<c044e2e2>] request_irq+0x7c/0x98
[<f8a2e67c>] init_module+0x546/0xe15 [floppy]
[<c043f1fb>] sys_init_module+0x17de/0x1977
[<c0404013>] syscall_call+0x7/0xb
DWARF2 unwinder stuck at syscall_call+0x7/0xb
Leftover inexact backtrace:
=======================
floppy0: Unable to grab IRQ6 for the floppy driver
cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[08004603019992c4]
AC'97 1 does not respond - RESET
AC'97 1 access is not valid [0xffffffff], removing mixer.
ali mixer 1 creating error.
Floppy drive(s): fd0 is 1.44M
IRQ handler type mismatch for IRQ 6
[<c04051db>] dump_trace+0x69/0x1af
[<c0405339>] show_trace_log_lvl+0x18/0x2c
[<c04058ed>] show_trace+0xf/0x11
[<c04059ea>] dump_stack+0x15/0x17
[<c044e253>] setup_irq+0x175/0x188
[<c044e2e2>] request_irq+0x7c/0x98
[<f8ab267c>] init_module+0x546/0xe15 [floppy]
[<c043f1fb>] sys_init_module+0x17de/0x1977
[<c0404013>] syscall_call+0x7/0xb
DWARF2 unwinder stuck at syscall_call+0x7/0xb
Leftover inexact backtrace:
=======================
floppy0: Unable to grab IRQ6 for the floppy driver
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
lp0: console ready
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK0] -> GSI 4 (level, low) -> IRQ 4
[drm] Initialized radeon 1.25.0 20060524 on minor 0
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SBTN]
ACPI: Power Button (CM) [PBTN]
ACPI: Lid Switch [LID]
ibm_acpi: ec object not found
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.4 loaded
EXT3 FS on hda7, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda6, type ext3), uses xattr
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
acpi-cpufreq: CPU0 - ACPI performance management activated.
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (7675 buckets, 61400 max) - 228 bytes per conntrack
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
audit(1163574898.523:4): avc: denied { read } for pid=2399 comm="sendmail" name="hda" dev=tmpfs ino=812 scontext=system_u:system_r:system_mail_t:s0 tcontext=system_u:object_r:fixed_disk_device_t:s0 tclass=blk_file
mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x4000000
mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x4000000
mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x4000000
mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x4000000
mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x4000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
[drm] Setting GART location based on old memory map
[drm] writeback test succeeded in 1 usecs
[root@192 ~]# lspci
00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02)
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M]
00:03.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
00:04.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
00:06.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:07.0 ISA bridge: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+]
00:09.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
00:0a.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
00:0a.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller
00:0a.3 Mass storage controller: Texas Instruments PCI7420/7620 Combo CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller
00:0c.0 USB Controller: NEC Corporation USB (rev 43)
00:0c.1 USB Controller: NEC Corporation USB (rev 43)
00:0c.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
00:12.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 330M/340M/350M
[root@192 ~]#

Sinon pour la page des drivers Sony je l'ai pas sous la main mais je vais chercher.
Merci bien !

Edit : Voilà la page qui correspond à mon portable http://www.vaio-link.com/downloads/select/select.asp?l=en&category=-1&serie=-1&m=1519&os=6&osl=3

Merci en éspérant que le lien marche. Je vais en cours jusqu'à midi

Pikachu_2014

00:09.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)

Ouch, on est loin d'une Centrino, je crois...
L'installation des pilotes madwifi est nécessaire : je te renvoie à une recherche sur le forum, le sujet a été abordé plus d'une fois.
Mais n'hésite pas à poster au besoin 😉

neidged6bels

Donc faut que j'installe le dépôt livna en faisant ça :
# rpm -ivh http://rpm.livna.org/livna-release-6.rpm

et ensuite je tape :
# yum install madwifi

C'est bien ça ?? Sinon ma question est : je vois que dans le premier code (rpm ...) il va aller chercher sur internet mais si je suis pas connecté je fais comment ??
Sinon est ce qu'il faut taper le # devant les codes ???
Merci

Pikachu_2014

1. Si tu n'a pas de connexion sous Fedora, je te renvoie à ce fil :
http://forums.fedora-fr.org/viewtopic.php?pid=111543#p111543
2. Non, tu ne tapes pas les # ni les $

neidged6bels

Bon j'ai reussi à avoir une connection un moment dans l'aprem par cable donc j'ai pu sans souci installer livna et madwifi alors qu'est ce qu'il faut que je fasse maintenant ?

Pikachu_2014

T'as pas lu la suite du fil après l'installation du pilote... Tout y est 5un peu succint, certes, mais...).
:roll:
Mais n'hésite pas à reposter au besoin.

neidged6bels

Je suis pas sûr d'avoir tout compris, faut lancer
#uname -r
Ensuite télécharger ça :
.6.18_1.2849.fc6.i686.rpm madwifi-0.9.2-1.lvn6.i386.rpm

puis ensuite ça ??
# echo "DEVICE=ath0" > /etc/sysconfig/network-scripts/ifcfg-ath0

Pikachu_2014

Reprenons.
Tu as pu installer avec yum le pilote madwifi, n'est-ce pas ?
Si oui, il te suffit bien de faire simplement un :
# echo "DEVICE=ath0" > /etc/sysconfig/network-scripts/ifcfg-ath0
puis de lancer l'assistant réseau (menu GNOME : Bureau > Administration > Réseau) et de configurer ta carte (activation au démarrage, activation tout court, éventuelle clé WEP...).

neidged6bels

Je commence à désespérer ... J'ai fait ce que tu m'as dit ça c'est passé sans problème.
mais j'arrive pas à paramètrer les truc je sais pas quoi choisir des champs je sais pas quoi mettre ...
Tu aurais pas un lien avec un screen ou je sais pas quoi ??!! :-D

neidged6bels

Un peu de neuf j'ai installé livna madwifi, mis à jour mon kernel au moyen d'un cable.
Donc je me retrouve avec les 3 "connections" dans system-config-network , j'ai une wifi une ath0 et une eth0 j'ai paramètré et acitvé les 3 mais je ne peux toujours pas avoir accès à internet voilà donc pour le moment.