salut
Excuse moi je n'avais pas vu le début, j'ai l'air fin...
j'ai bien tenté de le configurer par networkmanager
En fait il voit bien le réseau mais ne reçoit pas d'ip...
résultat du dmesg
bon courage pour la lecture
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:04: ioport range 0x8000-0x807f could not be reserved
pnp: 00:04: ioport range 0x8080-0x80ff has been reserved
pnp: 00:04: ioport range 0x8100-0x811f has been reserved
pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: a000-afff
MEM window: e2100000-e21fffff
PREFETCH window: e8000000-efffffff
PCI: Bus 2, cardbus bridge: 0000:00:06.0
IO window: 00002400-000024ff
IO window: 00002800-000028ff
PREFETCH window: 30000000-31ffffff
MEM window: 32000000-33ffffff
PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 169
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x38 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1158667254.692:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 159031EDF350496D
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [THRM] (29 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 32M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 185
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD800UE-22HCT0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Slimtype DVDRW SOSW-833S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 169
Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64
Yenta: ISA IRQ mask 0x06f8, PCI irq 169
Socket status: 30000007
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc (1250 mV)
powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13 (1075 mV)
cpu_init done, current fid 0xa, vid 0xa
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 LAN MODM USB0 USB1 USB2 USB3
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 216k freed
Write protecting the kernel read-only data: 705k
input: AT Translated Set 2 keyboard as /class/input/input0
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
input: SynPS/2 Synaptics TouchPad as /class/input/input1
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1158667260.564:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1481 types, 152 bools, 1 sens, 256 cats
security: 58 classes, 43474 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1158667260.840:3): policy loaded auid=4294967295
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
sis900.c: v1.08.09 Sep. 19 2005
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 169
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
0000:00:04.0: Using transceiver found at address 13 as default
eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 169, 00:16:36:20:cd:c4.
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 193
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 193, io mem 0xe2002000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.1[b] -> GSI 21 (level, low) -> IRQ 201
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 201, io mem 0xe2003000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
bcm43xx driver
ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 209
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: irq 209, io mem 0xe2004000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 217
bcm43xx: Chip ID 0x4318, rev 0x2
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled
bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, disabled
bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled
bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled
bcm43xx: PHY connected
bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7
bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 177
intel8x0_measure_ac97_clock: measured 55402 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 177
floppy0: no floppy controllers found
lp: driver loaded but no devices found
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda5, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 917496k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:917496k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (3575 buckets, 28600 max) - 224 bytes per conntrack
eth0: Media Link Off
ADDRCONF(NETDEV_UP): eth0: link is not ready
ieee80211_crypt: registered algorithm 'WEP'
bcm43xx: set security called
bcm43xx: .active_key = 0
bcm43xx: .level = 1
bcm43xx: .enabled = 1
bcm43xx: .encrypt = 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: PHY connected
bcm43xx: Radio turned on
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: 50, high: 46, index: 134)
<dc9c53e6> bcm43xx_phy_lo_adjust+0x2cc/0x2f1 [bcm43xx] <dc9c4c56> bcm43xx_phy_initb6+0x72d/0x855 [bcm43xx]
<c0405047> do_IRQ+0x75/0x80 <dc9c607e> bcm43xx_phy_initg+0x11e/0xdb5 [bcm43xx] <c040e0d7> delay_pmtmr+0xb/0x13 <c041c9e6> printk+0x1f/0xaf
<dc9c7fb1> bcm43xx_phy_init+0x6dd/0x706 [bcm43xx] <dc9c1123> bcm43xx_radio_turn_on+0x23d/0x244 [bcm43xx]
<dc9b67a9> bcm43xx_write_initvals+0x56/0x89 [bcm43xx] <dc9b7c61> bcm43xx_chip_init+0x6aa/0x979 [bcm43xx]
<dc9b9a76> bcm43xx_init_board+0x434/0xc00 [bcm43xx] <c042f6b2> debug_mutex_add_waiter+0x1c/0x2c
<c05acfa6> dev_open+0x2a/0x60 <c05abb95> dev_change_flags+0x47/0xe4
<c05e5757> devinet_ioctl+0x250/0x56c <c04d869a> copy_to_user+0x54/0x6a
<c05a2d03> sock_ioctl+0x1ae/0x1cd <c05a2b55> sock_ioctl+0x0/0x1cd
<c046bdc1> do_ioctl+0x19/0x4d <c046bff4> vfs_ioctl+0x1ff/0x216
<c046c057> sys_ioctl+0x4c/0x65 <c0402cb3> syscall_call+0x7/0xb
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: 50, high: 46, index: 134)
<dc9c53e6> bcm43xx_phy_lo_adjust+0x2cc/0x2f1 [bcm43xx] <dc9c6bd8> bcm43xx_phy_initg+0xc78/0xdb5 [bcm43xx]
<dc9c7fb1> bcm43xx_phy_init+0x6dd/0x706 [bcm43xx] <dc9c1123> bcm43xx_radio_turn_on+0x23d/0x244 [bcm43xx]
<dc9b67a9> bcm43xx_write_initvals+0x56/0x89 [bcm43xx] <dc9b7c61> bcm43xx_chip_init+0x6aa/0x979 [bcm43xx]
<dc9b9a76> bcm43xx_init_board+0x434/0xc00 [bcm43xx] <c042f6b2> debug_mutex_add_waiter+0x1c/0x2c
<c05acfa6> dev_open+0x2a/0x60 <c05abb95> dev_change_flags+0x47/0xe4
<c05e5757> devinet_ioctl+0x250/0x56c <c04d869a> copy_to_user+0x54/0x6a
<c05a2d03> sock_ioctl+0x1ae/0x1cd <c05a2b55> sock_ioctl+0x0/0x1cd
<c046bdc1> do_ioctl+0x19/0x4d <c046bff4> vfs_ioctl+0x1ff/0x216
<c046c057> sys_ioctl+0x4c/0x65 <c0402cb3> syscall_call+0x7/0xb
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: 50, high: 46, index: 134)
<dc9c53e6> bcm43xx_phy_lo_adjust+0x2cc/0x2f1 [bcm43xx] <dc9c3e43> bcm43xx_phy_init_pctl+0x270/0x286 [bcm43xx]
<dc9c6cb7> bcm43xx_phy_initg+0xd57/0xdb5 [bcm43xx] <dc9c7fb1> bcm43xx_phy_init+0x6dd/0x706 [bcm43xx]
<dc9c1123> bcm43xx_radio_turn_on+0x23d/0x244 [bcm43xx] <dc9b67a9> bcm43xx_write_initvals+0x56/0x89 [bcm43xx]
<dc9b7c61> bcm43xx_chip_init+0x6aa/0x979 [bcm43xx] <dc9b9a76> bcm43xx_init_board+0x434/0xc00 [bcm43xx]
<c042f6b2> debug_mutex_add_waiter+0x1c/0x2c <c05acfa6> dev_open+0x2a/0x60
<c05abb95> dev_change_flags+0x47/0xe4 <c05e5757> devinet_ioctl+0x250/0x56c
<c04d869a> copy_to_user+0x54/0x6a <c05a2d03> sock_ioctl+0x1ae/0x1cd
<c05a2b55> sock_ioctl+0x0/0x1cd <c046bdc1> do_ioctl+0x19/0x4d
<c046bff4> vfs_ioctl+0x1ff/0x216 <c046c057> sys_ioctl+0x4c/0x65
<c0402cb3> syscall_call+0x7/0xb
bcm43xx: Chip initialized
bcm43xx: DMA initialized
bcm43xx: 80211 cores initialized
bcm43xx: Keys cleared
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: 50, high: 46, index: 134)
<dc9c53e6> bcm43xx_phy_lo_adjust+0x2cc/0x2f1 [bcm43xx] <dc9c232e> bcm43xx_phy_set_baseband_attenuation+0x84/0x108 [bcm43xx]
<dc9c5c8f> bcm43xx_phy_lo_g_measure+0x884/0xb55 [bcm43xx] <c05c1779> nf_register_sockopt+0x53/0xe2
<c05c60ea> ip_local_deliver+0x16c/0x1f2 <c05c5978> ip_local_deliver_finish+0x0/0x175
<c05c577c> ip_rcv_finish+0x0/0x1fc <dc9b6542> bcm43xx_shm_read32+0x2c/0xa1 [bcm43xx]
<dc9b708d> bcm43xx_periodic_task_handler+0xf0/0x325 [bcm43xx] <c0602aed> _spin_unlock_irq+0x5/0x7
<c042eb05> hrtimer_run_queues+0x102/0x119 <c042372b> run_timer_softirq+0x10f/0x16b
<c05ada0c> net_rx_action+0x7d/0x151 <dc9b6f9d> bcm43xx_periodic_task_handler+0x0/0x325 [bcm43xx]
<c042070f> __do_softirq+0x35/0x7f <c040508a> do_softirq+0x38/0x42
=======================
<c0405047> do_IRQ+0x75/0x80 <c04036f2> common_interrupt+0x1a/0x20
<c0602af9> _spin_unlock_irqrestore+0xa/0xc <dc8a4b36> ieee80211softmac_scan+0x37/0x130 [ieee80211softmac]
<c04296d1> run_workqueue+0x85/0xc5 <dc8a4aff> ieee80211softmac_scan+0x0/0x130 [ieee80211softmac]
<c0429af0> worker_thread+0x0/0x10c <c0429bcb> worker_thread+0xdb/0x10c
<c04186d5> default_wake_function+0x0/0xc <c042c0b7> kthread+0x91/0xbd
<c042c026> kthread+0x0/0xbd <c0401005> kernel_thread_helper+0x5/0xb
ADDRCONF(NETDEV_UP): eth1: link is not ready
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Unable to find matching network after scan!
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Unable to find matching network after scan!
bcm43xx: Radio turned off
bcm43xx: DMA 0x0200 (RX) max used slots: 0/64
bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA 0x0220 (TX) max used slots: 1/512
bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: Media Link Off
ADDRCONF(NETDEV_UP): eth0: link is not ready
bcm43xx: Radio turned on
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: 50, high: 46, index: 134)
<dc9c53e6> bcm43xx_phy_lo_adjust+0x2cc/0x2f1 [bcm43xx] <dc9c4c56> bcm43xx_phy_initb6+0x72d/0x855 [bcm43xx]
<c0405047> do_IRQ+0x75/0x80 <dc9c607e> bcm43xx_phy_initg+0x11e/0xdb5 [bcm43xx] <c040e0d7> delay_pmtmr+0xb/0x13 <c041c9e6> printk+0x1f/0xaf
<dc9c7fb1> bcm43xx_phy_init+0x6dd/0x706 [bcm43xx] <dc9c1123> bcm43xx_radio_turn_on+0x23d/0x244 [bcm43xx]
<dc9b67a9> bcm43xx_write_initvals+0x56/0x89 [bcm43xx] <dc9b7c61> bcm43xx_chip_init+0x6aa/0x979 [bcm43xx]
<dc9b9a76> bcm43xx_init_board+0x434/0xc00 [bcm43xx] <c04b0fbe> avc_has_perm+0x4e/0x58
<c05acfa6> dev_open+0x2a/0x60 <c05abb95> dev_change_flags+0x47/0xe4
<c05b36ca> do_setlink+0x0/0x311 <c05b373b> do_setlink+0x71/0x311
<c05b36ca> do_setlink+0x0/0x311 <c05b329b> rtnetlink_rcv_msg+0x1ba/0x1df
<c05beccb> netlink_run_queue+0x69/0x102 <c05b30e1> rtnetlink_rcv_msg+0x0/0x1df <c05b309d> rtnetlink_rcv+0x25/0x3d <c05bf170> netlink_data_ready+0x12/0x51
<c05be0fb> netlink_sendskb+0x1c/0x32 <c05bf152> netlink_sendmsg+0x273/0x27f
<c05a27bb> sock_sendmsg+0xd4/0xef <c042c17c> autoremove_wake_function+0x0/0x35 <c042c17c> autoremove_wake_function+0x0/0x35 <c04d851f> copy_from_user+0x54/0x80
<c05a2fbd> sys_sendmsg+0x192/0x1f7 <c05a3d7f> sys_recvmsg+0x1b9/0x1cd
<c04d869a> copy_to_user+0x54/0x6a <c04441a4> __alloc_pages+0x6d/0x29c
<c044b598> __handle_mm_fault+0x7c5/0x7ed <c05a4460> sys_socketcall+0x240/0x261 <c0402cb3> syscall_call+0x7/0xb
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: 50, high: 46, index: 134)
<dc9c53e6> bcm43xx_phy_lo_adjust+0x2cc/0x2f1 [bcm43xx] <dc9c232e> bcm43xx_phy_set_baseband_attenuation+0x84/0x108 [bcm43xx]
<dc9c6bd8> bcm43xx_phy_initg+0xc78/0xdb5 [bcm43xx] <dc9c7fb1> bcm43xx_phy_init+0x6dd/0x706 [bcm43xx]
<dc9c1123> bcm43xx_radio_turn_on+0x23d/0x244 [bcm43xx] <dc9b67a9> bcm43xx_write_initvals+0x56/0x89 [bcm43xx]
<dc9b7c61> bcm43xx_chip_init+0x6aa/0x979 [bcm43xx] <dc9b9a76> bcm43xx_init_board+0x434/0xc00 [bcm43xx]
<c04b0fbe> avc_has_perm+0x4e/0x58 <c05acfa6> dev_open+0x2a/0x60
<c05abb95> dev_change_flags+0x47/0xe4 <c05b36ca> do_setlink+0x0/0x311
<c05b373b> do_setlink+0x71/0x311 <c05b36ca> do_setlink+0x0/0x311
<c05b329b> rtnetlink_rcv_msg+0x1ba/0x1df <c05beccb> netlink_run_queue+0x69/0x102
<c05b30e1> rtnetlink_rcv_msg+0x0/0x1df <c05b309d> rtnetlink_rcv+0x25/0x3d
<c05bf170> netlink_data_ready+0x12/0x51 <c05be0fb> netlink_sendskb+0x1c/0x32
<c05bf152> netlink_sendmsg+0x273/0x27f <c05a27bb> sock_sendmsg+0xd4/0xef
<c042c17c> autoremove_wake_function+0x0/0x35 <c042c17c> autoremove_wake_function+0x0/0x35
<c04d851f> copy_from_user+0x54/0x80 <c05a2fbd> sys_sendmsg+0x192/0x1f7
<c05a3d7f> sys_recvmsg+0x1b9/0x1cd <c04d869a> copy_to_user+0x54/0x6a
<c04441a4> __alloc_pages+0x6d/0x29c <c044b598> __handle_mm_fault+0x7c5/0x7ed
<c05a4460> sys_socketcall+0x240/0x261 <c0402cb3> syscall_call+0x7/0xb
bcm43xx: Chip initialized
bcm43xx: DMA initialized
bcm43xx: 80211 cores initialized
bcm43xx: Keys cleared
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
ADDRCONF(NETDEV_UP): eth1: link is not ready
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: set security called
bcm43xx: .level = 0
bcm43xx: .enabled = 0
bcm43xx: .encrypt = 0
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Unable to find matching network after scan!
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Unable to find matching network after scan!
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
ohci_hcd 0000:00:03.0: wakeup
usb 1-2: new full speed USB device using ohci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Vendor: LEXAR Model: JUMPDRIVE Rev: 1.20
Type: Direct-Access ANSI SCSI revision: 01 CCS
usb-storage: device scan complete
0:0:0:0: Attached scsi generic sg0 type 0
SCSI device sda: 251904 512-byte hdwr sectors (129 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 251904 512-byte hdwr sectors (129 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
