merci pour vos réponses oui c un bt848 si mes souvenirs sont bons.
lsmod :
Module Size Used by
loop 15561 0
radeon 97376 1
drm 63701 2 radeon
ppdev 8645 0
autofs4 19013 1
hidp 15937 2
rfcomm 34517 0
l2cap 23617 10 hidp,rfcomm
bluetooth 44069 5 hidp,rfcomm,l2cap
sunrpc 136573 1
ip_conntrack_ftp 7601 0
ip_conntrack_netbios_ns 3009 0
ipt_REJECT 5441 1
xt_state 2241 10
ip_conntrack 49261 3 ip_conntrack_ftp,ip_conntrack_netbios_ns,xt_state
nfnetlink 6489 1 ip_conntrack
xt_tcpudp 3265 12
iptable_filter 3137 1
ip_tables 11529 1 iptable_filter
x_tables 12613 4 ipt_REJECT,xt_state,xt_tcpudp,ip_tables
acpi_cpufreq 6729 0
video 14917 0
button 6609 0
battery 9285 0
ac 4933 0
ipv6 225697 12
lp 12297 0
floppy 57733 0
nvram 8393 0
uhci_hcd 28881 0
snd_ens1371 24801 0
bttv 166965 0
gameport 15177 1 snd_ens1371
video_buf 21317 1 bttv
snd_rawmidi 24001 1 snd_ens1371
snd_ac97_codec 83937 1 snd_ens1371
compat_ioctl32 1473 1 bttv
snd_ac97_bus 2497 1 snd_ac97_codec
i2c_algo_bit 8393 1 bttv
snd_seq_dummy 3781 0
v4l2_common 7745 1 bttv
snd_seq_oss 28993 0
snd_seq_midi_event 7105 1 snd_seq_oss
btcx_risc 4809 1 bttv
snd_seq 47153 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
ir_common 9413 1 bttv
snd_seq_device 8909 4 snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 45009 0
via686a 15561 0
snd_mixer_oss 16449 1 snd_pcm_oss
tveeprom 13905 1 bttv
snd_pcm 76869 3 snd_ens1371,snd_ac97_codec,snd_pcm_oss
videodev 9409 1 bttv
hwmon 3269 1 via686a
8139cp 21185 0
i2c_isa 5185 1 via686a
i2c_viapro 8277 0
8139too 25409 0
i2c_core 20673 6 bttv,i2c_algo_bit,via686a,tveeprom,i2c_isa,i2c_viapro
parport_pc 25445 1
snd_timer 22597 2 snd_seq,snd_pcm
mii 5313 2 8139cp,8139too
parport 34313 3 ppdev,lp,parport_pc
snd 50501 10 snd_ens1371,snd_rawmidi,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9377 1 snd
snd_page_alloc 10441 1 snd_pcm
dm_snapshot 15981 0
dm_zero 2113 0
dm_mirror 19729 0
dm_mod 50521 6 dm_snapshot,dm_zero,dm_mirror
ext3 116169 2
jbd 52693 1 ext3
lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
00:04.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
00:04.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
00:05.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 07)
00:09.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0b.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)
dmesg:
Linux version 2.6.16-1.2122_FC5 (
bhcompile@hs20-bc1-3.build.redhat.com) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #1 Sun May 21 15:01:01 EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ffc000 (usable)
BIOS-e820: 0000000007ffc000 - 0000000007fff000 (ACPI data)
BIOS-e820: 0000000007fff000 - 0000000008000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
127MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 32764
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 28668 pages, LIFO batch:7
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f6170
ACPI: RSDT (v001 ASUS MED_2001 0x30303031 MSFT 0x31313031) @ 0x07ffc000
ACPI: FADT (v001 ASUS MED_2001 0x30303031 MSFT 0x31313031) @ 0x07ffc080
ACPI: BOOT (v001 ASUS MED_2001 0x30303031 MSFT 0x31313031) @ 0x07ffc040
ACPI: DSDT (v001 ASUS MED_2001 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 10000000 (gap: 08000000:f7ff0000)
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01102000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c03d5000 soft=c03d4000
PID hash table entries: 512 (order: 9, 8192 bytes)
Detected 501.218 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 124312k/131056k available (1918k kernel code, 6192k reserved, 775k data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1004.26 BogoMIPS (lpj=2008521)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 01
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c00)
checking if image is initramfs... it is
Freeing initrd memory: 1643k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0900, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [_SB_.PCI0] bus is 0
PCI quirk: region e400-e4ff claimed by vt82c586 ACPI
PCI quirk: region e800-e80f claimed by vt82c686 SMB
Boot video device is 0000:00:0b.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:03: ioport range 0xe400-0xe47f could not be reserved
pnp: 00:03: ioport range 0xe800-0xe80f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
Simple Boot Flag at 0x3a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1150668396.968:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 43645308A4C9E5AD
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Disabling Via external APIC routing
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 16 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 64M @ 0xf8000000
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:04.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 2B020H1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: IDE/ATAPI CD-ROM 44XS, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 39851760 sectors (20404 MB)
native capacity is 40020624 sectors (20490 MB)
hda: Host Protected Area disabled.
hda: 40020624 sectors (20490 MB) w/2048KiB Cache, CHS=39703/16/63, UDMA(66)
hda: cache flushes not supported
hda: hda1 hda2
hdd: ATAPI 11X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 PCI1 UAR1 UAR2 USB0 USB1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 176k freed
Write protecting the kernel read-only data: 358k
device-mapper: 4.5.0-ioctl (2005-10-04) initialised:
dm-devel@redhat.com
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 6 roles, 1161 types, 135 bools, 1 sens, 256 cats
security: 55 classes, 38679 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
parport_pc: VIA parallel port: io=0x378, irq=7
8139too Fast Ethernet driver 0.9.27
PCI: Enabling device 0000:00:0a.0 (0004 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL8139 at 0xc8864000, 00:08:a1:3d:ad:2e, IRQ 10
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Linux video capture interface: v1.00
via686a 0000:00:04.4: base address not set - upgrade BIOS or use force_addr=0xaddr
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
PCI: Enabling device 0000:00:09.0 (0004 -> 0006)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
bttv0: Bt848 (rev 18) at 0000:00:09.0, irq: 11, latency: 32, mmio: 0xf7800000
bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ff27ff [init]
tveeprom 1-0050: Huh, no eeprom present (err=-121)?
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
PCI: Enabling device 0000:00:05.0 (0004 -> 0005)
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:04.2: UHCI Host Controller
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:04.2: irq 10, io base 0x0000d400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:04.3: UHCI Host Controller
uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:04.3: irq 10, io base 0x0000d000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Non-volatile memory driver v1.2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
lp0: using parport0 (interrupt-driven).
lp0: console ready
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 524280k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:524280k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (1023 buckets, 8184 max) - 232 bytes per conntrack
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
ppdev: user-space parallel port driver
ppdev0: registered pardevice
ppdev0: unregistered pardevice
ppdev1: claim the port first
ppdev2: claim the port first
ppdev3: claim the port first
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.22.0 20051229 on minor 0
[drm] Loading R200 Microcode
audit(1150661321.607:2): avc: granted { execstack } for pid=2431 comm="gaim" scontext=user_u:system_r:unconfined_t:s0 tcontext=user_u:system_r:unconfined_t:s0 tclass=process
audit(1150661321.607:3): avc: granted { execmem } for pid=2431 comm="gaim" scontext=user_u:system_r:unconfined_t:s0 tcontext=user_u:system_r:unconfined_t:s0 tclass=process
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: USB disconnect, address 2
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
loop: loaded (max 8 devices)
voila merci pour tout ++
