ah ouais, ceette version du driver marche mieux que celle que j'avais essayé,
J'arrive à la compiler et à charger le module, mais le script d'installation me donne une erreur plus loin et ça ne marche toujours pas:
The driver detected the following supported cameras:
quickcam [41.127602]: ----------LOADING QUICKCAM MODULE------------
quickcam [41.127617]: struct quickcam size: 4196
I will be using , if there are more cameras I'll not test them.
Press Ctrl+C to quit, Enter to continue --->
Testing if is correct.
ls: : Aucun fichier ou répertoire de ce type
./quickcam.sh: line 699: [: too many arguments
ls: : Aucun fichier ou répertoire de ce type
ls: : Aucun fichier ou répertoire de ce type
[!] major number is .
Usually it should be 81, so there are problems ahead.
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue --->
Je me dis on sait jamais, j'appuie quand même sur entrée:
Right now driver is loaded and should be ready to run.
Let's test if user applications can see it, starting with qcset.
Press Ctrl+C to quit, Enter to continue --->
./qcset: can not open /dev/video0 (No such file or directory)
[!] qcset did not found the QuickCam camera
WARNING: If you press Enter, I'll try to continue anyway,
but this probably will fail. You SHOULD press Ctrl+C now.
Press Ctrl+C to quit, Enter to continue --->
si je ne passe pas par le script mais si je fais "make all" puis "make install" puis "modprobe videodev" puis "modprobe quickcam" je n'ai aucune erreur mais ça ne marche pas..