Bonjour.
Je viens d’installer Fedora21 Lxde sur un PC.
Je n’arrive pas à faire fonctionner le scanner.
Notez qu’il s’agit de matos (PC et scanner assez anciens. Le scanner est un Epson Perfection 660.
J’ai installé
xsane et
sane backend.
Ensuite je me suis servis d’un tuto trouvé sur le site de Ubuntu a cette adresse:
http://doc.ubuntu-fr.org/scanner_usb_non_reconnu#trouver_le_firmware
Parce que cela parler du même scanner que le mien.
J’ai fait toutes les opérations indiquées dans le paragraphe 3..
Copie du fichier Bin .
Je précise que le mien est bien le tail_058.bin et non le tail_061.bin.
Attribuer les droits.
chmod 775 /etc/sane.d/TAIL_058.BIN
Modifier le fichier de configuration
Mais lorsque que je tape :
scanimage -L j’obtient:
# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Par contre quand je tape :
sane-find-scanner j’obtiens cela.
]# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8 [EPSON ], product=0x0114 [Perfection 660 ]) at libusb:003:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Je voit pas trop que faire donc je m’adresse à vous.
Merci pour l’aide.