Bon je viens de retenter un essai avec le pilote propriétaire en version 14.4
pas plus de réussite qu'avant:
le spash screen apparait
puis écran noir
puis de nouveau splash screen et ça ne bouge plus
voici le log xorg.0.log (si quelqu'un à le courage de le lire....
[ 8.444]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 8.444] X Protocol Version 11, Revision 0
[ 8.444] Build Operating System: 3.12.8-300.fc20.x86_64
[ 8.444] Current Operating System: Linux localhost.localdomain 3.13.9-200.fc20.x86_64 #1 SMP Fri Apr 4 12:13:05 UTC 2014 x86_64
[ 8.444] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.9-200.fc20.x86_64 root=/dev/mapper/vg0-lv--root ro vconsole.font=latarcyrheb-sun16 rd.lvm.lv=vg0/lv-swap rd.lvm.lv=vg0/lv-root rhgb quiet LANG=fr_FR.UTF-8
[ 8.444] Build Date: 28 February 2014 03:35:50AM
[ 8.444] Build ID: xorg-x11-server 1.14.4-7.fc20
[ 8.444] Current version of pixman: 0.30.0
[ 8.444] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8.444] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.445] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 22 15:34:51 2014
[ 8.445] (==) Using config file: "/etc/X11/xorg.conf"
[ 8.445] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 8.445] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8.452] (==) ServerLayout "aticonfig Layout"
[ 8.452] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 8.452] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 8.452] (**) | |-->Device "aticonfig-Device[0]-0"
[ 8.452] (==) Automatically adding devices
[ 8.452] (==) Automatically enabling devices
[ 8.452] (==) Automatically adding GPU devices
[ 8.452] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 8.452] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 8.452] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.452] (II) Loader magic: 0x80dd00
[ 8.452] (II) Module ABI versions:
[ 8.452] X.Org ANSI C Emulation: 0.4
[ 8.452] X.Org Video Driver: 14.1
[ 8.452] X.Org XInput driver : 19.2
[ 8.452] X.Org Server Extension : 7.0
[ 8.452] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 8.453] (--) PCI:*(0:0:2:0) 8086:0416:1028:05cc rev 6, Mem @ 0xf5800000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 8.453] (--) PCI: (0:1:0:0) 1002:6821:1028:05cc rev 0, Mem @ 0xe0000000/268435456, 0xf7c00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 8.453] Initializing built-in extension Generic Event Extension
[ 8.453] Initializing built-in extension SHAPE
[ 8.453] Initializing built-in extension MIT-SHM
[ 8.453] Initializing built-in extension XInputExtension
[ 8.453] Initializing built-in extension XTEST
[ 8.453] Initializing built-in extension BIG-REQUESTS
[ 8.453] Initializing built-in extension SYNC
[ 8.453] Initializing built-in extension XKEYBOARD
[ 8.453] Initializing built-in extension XC-MISC
[ 8.453] Initializing built-in extension XINERAMA
[ 8.453] Initializing built-in extension XFIXES
[ 8.453] Initializing built-in extension RENDER
[ 8.453] Initializing built-in extension RANDR
[ 8.453] Initializing built-in extension COMPOSITE
[ 8.453] Initializing built-in extension DAMAGE
[ 8.453] Initializing built-in extension MIT-SCREEN-SAVER
[ 8.453] Initializing built-in extension DOUBLE-BUFFER
[ 8.453] Initializing built-in extension RECORD
[ 8.453] Initializing built-in extension DPMS
[ 8.453] Initializing built-in extension X-Resource
[ 8.453] Initializing built-in extension XVideo
[ 8.453] Initializing built-in extension XVideo-MotionCompensation
[ 8.453] Initializing built-in extension SELinux
[ 8.453] Initializing built-in extension XFree86-VidModeExtension
[ 8.453] Initializing built-in extension XFree86-DGA
[ 8.453] Initializing built-in extension XFree86-DRI
[ 8.453] Initializing built-in extension DRI2
[ 8.453] (II) "glx" will be loaded by default.
[ 8.453] (WW) "xwayland" is not to be loaded by default. Skipping.
[ 8.453] (II) LoadModule: "glx"
[ 8.458] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 8.459] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 8.459] compiled for 6.9.0, module version = 1.0.0
[ 8.460] Loading extension GLX
[ 8.460] (II) LoadModule: "fglrx"
[ 8.460] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 8.550] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 8.550] compiled for 1.4.99.906, module version = 14.10.2
[ 8.550] Module class: X.Org Video Driver
[ 8.550] (II) Loading sub module "fglrxdrm"
[ 8.550] (II) LoadModule: "fglrxdrm"
[ 8.551] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 8.551] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 8.551] compiled for 1.4.99.906, module version = 14.10.2
[ 8.551] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 8.551] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.10
[ 8.551] (II) AMD Proprietary Linux Driver Build Date: Apr 15 2014 21:16:12
[ 8.551] (++) using VT number 1
[ 8.552] (WW) Falling back to old probe method for fglrx
[ 8.559] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 8.564] ukiDynamicMajor: found major device number 246
[ 8.564] ukiDynamicMajor: found major device number 246
[ 8.564] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 8.564] ukiOpenDevice: node name is /dev/ati/card0
[ 8.564] ukiOpenDevice: open result is 9, (OK)
[ 9.217] ukiOpenByBusid: ukiOpenMinor returns 9
[ 9.218] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 9.265] (--) Chipset Supported AMD Graphics Processor (0x6821) found
[ 9.265] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 9.265] (II) fglrx: intel VGA device detected, load intel driver.
[ 9.265] (II) LoadModule: "intel"
[ 9.266] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 9.266] (II) Module intel: vendor="X.Org Foundation"
[ 9.266] compiled for 1.14.4, module version = 2.21.15
[ 9.266] Module class: X.Org Video Driver
[ 9.266] ABI class: X.Org Video Driver, version 14.1
[ 9.267] (II) fglrx(0): pEnt->device->identifier=0x2454fa0
[ 9.267] (II) intel(1): pEnt->device->identifier=(nil)
[ 9.267] (EE) Screen 1 deleted because of no matching config section.
[ 9.267] (II) UnloadModule: "intel"
[ 9.267] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 9.267] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
[ 9.290] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 9.290] (==) fglrx(0): RGB weight 888
[ 9.290] (==) fglrx(0): Default visual is TrueColor
[ 9.290] (**) fglrx(0): Option "Tiling" "off"
[ 9.290] (**) fglrx(0): Option "LinearFramebuffer" "on"
[ 9.290] (**) fglrx(0): ChipID override: 0x0416
[ 9.290] (**) fglrx(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[ 9.290] (**) fglrx(0): Relaxed fencing enabled
[ 9.290] (**) fglrx(0): Wait on SwapBuffers? enabled
[ 9.290] (**) fglrx(0): Triple buffering? enabled
[ 9.290] (**) fglrx(0): Framebuffer linear
[ 9.290] (**) fglrx(0): Pixmaps linear
[ 9.290] (**) fglrx(0): 3D buffers tiled
[ 9.290] (**) fglrx(0): SwapBuffers wait enabled
[ 9.290] (==) fglrx(0): video overlay key set to 0x101fe
[ 9.292] (II) fglrx(0): Output eDP1 using monitor section aticonfig-Monitor[0]-0
[ 9.310] (--) fglrx(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 9.311] (II) fglrx(0): Output VGA1 has no monitor section
[ 9.311] (II) fglrx(0): Output DP1 has no monitor section
[ 9.311] (II) fglrx(0): Output HDMI1 has no monitor section
[ 9.312] (II) fglrx(0): EDID for output eDP1
[ 9.312] (II) fglrx(0): Manufacturer: LGD Model: 32c Serial#: 0
[ 9.312] (II) fglrx(0): Year: 2011 Week: 0
[ 9.312] (II) fglrx(0): EDID Version: 1.4
[ 9.312] (II) fglrx(0): Digital Display Input
[ 9.312] (II) fglrx(0): 6 bits per channel
[ 9.312] (II) fglrx(0): Digital interface is undefined
[ 9.312] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 9.312] (II) fglrx(0): Gamma: 2.20
[ 9.312] (II) fglrx(0): No DPMS capabilities specified
[ 9.312] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 9.312] (II) fglrx(0): First detailed timing is preferred mode
[ 9.312] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 9.312] (II) fglrx(0): redX: 0.611 redY: 0.357 greenX: 0.323 greenY: 0.589
[ 9.312] (II) fglrx(0): blueX: 0.149 blueY: 0.056 whiteX: 0.313 whiteY: 0.329
[ 9.312] (II) fglrx(0): Manufacturer's mask: 0
[ 9.312] (II) fglrx(0): Supported detailed timing:
[ 9.312] (II) fglrx(0): clock: 139.0 MHz Image Size: 344 x 194 mm
[ 9.312] (II) fglrx(0): h_active: 1920 h_sync: 1952 h_sync_end 2016 h_blank_end 2080 h_border: 0
[ 9.312] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1089 v_blanking: 1111 v_border: 0
[ 9.312] (II) fglrx(0): Supported detailed timing:
[ 9.312] (II) fglrx(0): clock: 128.5 MHz Image Size: 344 x 194 mm
[ 9.312] (II) fglrx(0): h_active: 1920 h_sync: 2080 h_sync_end 2320 h_blank_end 2608 h_border: 0
[ 9.312] (II) fglrx(0): v_active: 1080 v_sync: 1094 v_sync_end 1102 v_blanking: 1230 v_border: 0
[ 9.312] (II) fglrx(0): DC9YJ\80156WFC
[ 9.312] (II) fglrx(0): Unknown vendor-specific block 0
[ 9.312] (II) fglrx(0): EDID (in hex):
[ 9.312] (II) fglrx(0): 00ffffffffffff0030e42c0300000000
[ 9.312] (II) fglrx(0): 00150104902213780aaf559c5b529626
[ 9.312] (II) fglrx(0): 0e505400000001010101010101010101
[ 9.312] (II) fglrx(0): 0101010101014c3680a070381f402040
[ 9.312] (II) fglrx(0): 360058c210000018323280b072389640
[ 9.312] (II) fglrx(0): a0f0e80058c210000018000000fe0044
[ 9.312] (II) fglrx(0): 4339594a803135365746430a00000000
[ 9.312] (II) fglrx(0): 000041319e0000000002010a20200084
[ 9.312] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported)
[ 9.312] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 9.312] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 9.312] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported)
[ 9.312] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported)
[ 9.312] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported)
[ 9.312] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported)
[ 9.312] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported)
[ 9.312] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported)
[ 9.312] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported)
[ 9.312] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported)
[ 9.312] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 9.312] (II) fglrx(0): Printing probed modes for output eDP1
[ 9.312] (II) fglrx(0): Modeline "1920x1080"x60.2 139.00 1920 1952 2016 2080 1080 1083 1089 1111 -hsync -vsync (66.8 kHz eP)
[ 9.312] (II) fglrx(0): Modeline "1920x1080"x40.1 128.50 1920 2080 2320 2608 1080 1094 1102 1230 -hsync -vsync (49.3 kHz e)
[ 9.312] (II) fglrx(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 9.312] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 9.312] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 9.313] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 9.313] (II) fglrx(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 9.313] (II) fglrx(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 9.313] (II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 9.314] (II) fglrx(0): EDID for output VGA1
[ 9.314] (II) fglrx(0): EDID for output DP1
[ 9.314] (II) fglrx(0): EDID for output HDMI1
[ 9.314] (II) fglrx(0): Output eDP1 connected
[ 9.314] (II) fglrx(0): Output VGA1 disconnected
[ 9.314] (II) fglrx(0): Output DP1 disconnected
[ 9.314] (II) fglrx(0): Output HDMI1 disconnected
[ 9.314] (II) fglrx(0): Using exact sizes for initial modes
[ 9.314] (II) fglrx(0): Output eDP1 using initial mode 1920x1080 +0+0
[ 9.314] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 9.314] (II) fglrx(0): Kernel page flipping support detected, enabling
[ 9.314] (==) fglrx(0): DPI set to (96, 96)
[ 9.314] (II) Loading sub module "fb"
[ 9.314] (II) LoadModule: "fb"
[ 9.314] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 9.314] (II) Module fb: vendor="X.Org Foundation"
[ 9.314] compiled for 1.14.4, module version = 1.0.0
[ 9.314] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.314] (II) Loading sub module "dri2"
[ 9.314] (II) LoadModule: "dri2"
[ 9.314] (II) Module "dri2" already built-in
[ 9.314] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 9.314] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 9.314] (==) fglrx(0): Default visual is TrueColor
[ 9.314] (**) fglrx(0): Option "DPMS" "true"
[ 9.315] (==) fglrx(0): RGB weight 888
[ 9.315] (II) fglrx(0): Using 8 bits per RGB
[ 9.315] (==) fglrx(0): Buffer Tiling is ON
[ 9.315] (II) Loading sub module "fglrxdrm"
[ 9.315] (II) LoadModule: "fglrxdrm"
[ 9.315] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 9.315] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 9.315] compiled for 1.4.99.906, module version = 14.10.2
[ 9.319] ukiDynamicMajor: found major device number 246
[ 9.319] ukiDynamicMajor: found major device number 246
[ 9.319] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 9.319] ukiOpenDevice: node name is /dev/ati/card0
[ 9.319] ukiOpenDevice: open result is 12, (OK)
[ 9.319] ukiOpenByBusid: ukiOpenMinor returns 12
[ 9.319] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 9.319] (**) fglrx(0): NoAccel = NO
[ 9.319] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 9.319] (--) fglrx(0): Chipset: "AMD Radeon R9 M270X" (Chipset = 0x6821)
[ 9.319] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x05cc)
[ 9.319] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 9.319] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 9.319] (--) fglrx(0): MMIO registers at 0xf7c00000
[ 9.319] (--) fglrx(0): I/O port at 0x0000e000
[ 9.319] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 9.324] (II) fglrx(0): AC Adapter is used
[ 9.325] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 9.325] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 9.325] (II) fglrx(0): PCIE card detected
[ 9.325] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 9.325] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 9.335] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 9.335] (II) fglrx(0): RandR 1.2 support is enabled!
[ 9.335] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 9.335] (II) Loading sub module "fb"
[ 9.335] (II) LoadModule: "fb"
[ 9.335] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 9.335] (II) Module fb: vendor="X.Org Foundation"
[ 9.335] compiled for 1.14.4, module version = 1.0.0
[ 9.335] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.335] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 9.335] (II) Loading sub module "ddc"
[ 9.335] (II) LoadModule: "ddc"
[ 9.335] (II) Module "ddc" already built-in
[ 9.474] (II) fglrx(0): Eyefinity capable adapter detected.
[ 9.474] (II) fglrx(0): Adapter AMD Radeon R9 M270X has 6 configurable heads and 1 displays connected.
[ 9.474] (==) fglrx(0): PseudoColor visuals disabled
[ 9.474] (II) Loading sub module "ramdac"
[ 9.474] (II) LoadModule: "ramdac"
[ 9.474] (II) Module "ramdac" already built-in
[ 9.474] (==) fglrx(0): NoDRI = NO
[ 9.474] (==) fglrx(0): Capabilities: 0x00000000
[ 9.474] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 9.474] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 9.474] (==) fglrx(0): UseFastTLS=0
[ 9.474] (II) fglrx(0): TearFreeDesktop is not supported on PowerXpress systems currently.
[ 9.475] (--) Depth 24 pixmap format is 32 bpp
[ 9.475] (II) LoadModule: "glesx"
[ 9.475] (II) Loading /usr/lib64/xorg/modules/glesx.so
[ 9.475] (II) Module glesx: vendor="X.Org Foundation"
[ 9.475] compiled for 1.4.99.906, module version = 1.0.0
[ 9.475] Loading extension GLESX
[ 9.475] (II) fglrx(0): [DRI2] Setup complete
[ 9.475] (II) fglrx(0): [DRI2] DRI driver: i965
[ 9.475] (II) fglrx(0): Allocated new frame buffer 1920x1080 stride 7680, untiled
[ 9.476] (II) UXA(0): Driver registered support for the following operations:
[ 9.476] (II) solid
[ 9.476] (II) copy
[ 9.476] (II) composite (RENDER acceleration)
[ 9.476] (II) put_image
[ 9.476] (II) get_image
[ 9.476] (==) fglrx(0): Backing store disabled
[ 9.476] (==) fglrx(0): Silken mouse enabled
[ 9.476] (II) fglrx(0): Initializing HW Cursor
[ 9.476] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9.568] (**) fglrx(0): DPMS enabled
[ 9.568] (==) fglrx(0): Intel XvMC decoder enabled
[ 9.568] (II) fglrx(0): Set up textured video
[ 9.568] (II) fglrx(0): [XvMC] xvmc_vld driver initialized.
[ 9.568] (II) fglrx(0): direct rendering: DRI2 Enabled
[ 9.568] (WW) fglrx(0): Option "VendorName" is not used
[ 9.568] (WW) fglrx(0): Option "ModelName" is not used
[ 9.568] (WW) fglrx(0): Option "Shadow" is not used
[ 9.568] (WW) fglrx(0): Option "Tiling" is not used
[ 9.568] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[ 9.568] (==) fglrx(0): hotplug detection: "enabled"
[ 9.584] Loading extension ATIFGLRXDRI
[ 9.584] (II) fglrx(0): doing swlDriScreenInit
[ 9.584] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 9.584] ukiDynamicMajor: found major device number 246
[ 9.584] ukiDynamicMajor: found major device number 246
[ 9.584] ukiDynamicMajor: found major device number 246
[ 9.584] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 9.584] ukiOpenDevice: node name is /dev/ati/card0
[ 9.584] ukiOpenDevice: open result is 14, (OK)
[ 9.584] ukiOpenByBusid: ukiOpenMinor returns 14
[ 9.584] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 9.584] (II) fglrx(0): [uki] DRM interface version 1.0
[ 9.584] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 9.584] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 9.584] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f6944268000
[ 9.584] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 9.584] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 9.584] (II) fglrx(0): swlDriScreenInit done
[ 9.584] (II) fglrx(0): Kernel Module Version Information:
[ 9.584] (II) fglrx(0): Name: fglrx
[ 9.584] (II) fglrx(0): Version: 14.10.2
[ 9.584] (II) fglrx(0): Date: Apr 15 2014
[ 9.584] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 9.584] (II) fglrx(0): Kernel Module version matches driver.
[ 9.584] (II) fglrx(0): Kernel Module Build Time Information:
[ 9.584] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.13.9-200.fc20.x86_64
[ 9.584] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 9.584] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 9.584] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 9.584] (II) fglrx(0): [uki] register handle = 0x00004000
[ 9.584] (II) fglrx(0): FIREGL Board Found
[ 9.586] (II) fglrx(0): DRI initialization successfull
[ 9.586] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010e0000
[ 9.587] (II) fglrx(0): Intel display surface mc addr for AMD: fff7917000
[ 9.588] (==) fglrx(0): Backing store disabled
[ 9.588] Loading extension FGLRXEXTENSION
[ 9.588] (**) fglrx(0): DPMS enabled
[ 9.588] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 9.588] (**) fglrx(0): Textured Video is enabled.
[ 9.588] (II) fglrx(0): GLESX enableFlags = 9040
[ 9.588] (II) fglrx(0): GLESX is enabled
[ 9.588] (II) LoadModule: "amdxmm"
[ 9.588] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[ 9.588] (II) Module amdxmm: vendor="X.Org Foundation"
[ 9.588] compiled for 1.4.99.906, module version = 2.0.0
[ 9.630] Loading extension AMDXVOPL
[ 9.630] Loading extension AMDXVBA
[ 9.630] XvScreenInit: screen devPrivates ptr non-NULL before init
[ 9.631] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 9.633] (II) fglrx(0): Enable composite support successfully
[ 9.633] (WW) fglrx(0): Option "VendorName" is not used
[ 9.633] (WW) fglrx(0): Option "ModelName" is not used
[ 9.633] (WW) fglrx(0): Option "Shadow" is not used
[ 9.633] (WW) fglrx(0): Option "Tiling" is not used
[ 9.633] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[ 9.633] (II) fglrx(0): X context handle = 0x1
[ 9.633] (II) fglrx(0): [DRI] installation complete
[ 9.635] (--) RandR disabled
[ 9.640] (II) SELinux: Disabled by boolean
[ 9.640] ukiDynamicMajor: found major device number 246
[ 9.640] ukiDynamicMajor: found major device number 246
[ 9.640] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 9.640] ukiOpenDevice: node name is /dev/ati/card0
[ 9.640] ukiOpenDevice: open result is 15, (OK)
[ 9.640] ukiOpenByBusid: ukiOpenMinor returns 15
[ 9.640] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 9.660] ukiDynamicMajor: found major device number 246
[ 9.660] ukiDynamicMajor: found major device number 246
[ 9.660] ukiDynamicMajor: found major device number 246
[ 9.660] ukiOpenDevice: node name is /dev/ati/card0
[ 9.660] ukiOpenDevice: open result is 16, (OK)
[ 9.660] ukiGetBusid returned 'PCI:1:0:0'
[ 9.660] ukiOpenDevice: node name is /dev/ati/card1
[ 9.660] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card2
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card3
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card4
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card5
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card6
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card7
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card8
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card9
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card10
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card11
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card12
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card13
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card14
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiOpenDevice: node name is /dev/ati/card15
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: open result is -1, (No such device)
[ 9.661] ukiOpenDevice: Open failed
[ 9.661] ukiDynamicMajor: found major device number 246
[ 9.661] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 9.661] ukiOpenDevice: node name is /dev/ati/card0
[ 9.661] ukiOpenDevice: open result is 16, (OK)
[ 9.661] ukiOpenByBusid: ukiOpenMinor returns 16
[ 9.661] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 9.745] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 9.746] ukiDynamicMajor: found major device number 246
[ 9.746] ukiDynamicMajor: found major device number 246
[ 9.746] ukiDynamicMajor: found major device number 246
[ 9.746] ukiOpenDevice: node name is /dev/ati/card0
[ 9.746] ukiOpenDevice: open result is 17, (OK)
[ 9.746] ukiGetBusid returned 'PCI:1:0:0'
[ 9.746] ukiOpenDevice: node name is /dev/ati/card1
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card2
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card3
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card4
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card5
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card6
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card7
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card8
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card9
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card10
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card11
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card12
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card13
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card14
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiOpenDevice: node name is /dev/ati/card15
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: open result is -1, (No such device)
[ 9.746] ukiOpenDevice: Open failed
[ 9.746] ukiDynamicMajor: found major device number 246
[ 9.746] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 9.746] ukiOpenDevice: node name is /dev/ati/card0
[ 9.746] ukiOpenDevice: open result is 17, (OK)
[ 9.746] ukiOpenByBusid: ukiOpenMinor returns 17
[ 9.746] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 9.761] (II) fglrx(0): Setting screen physical size to 508 x 285
[ 9.779] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 9.779] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 9.779] (**) Power Button: Applying InputClass "system-keyboard"
[ 9.779] (II) LoadModule: "evdev"
[ 9.780] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 9.780] (II) Module evdev: vendor="X.Org Foundation"
[ 9.780] compiled for 1.14.3, module version = 2.8.2
[ 9.780] Module class: X.Org XInput Driver
[ 9.780] ABI class: X.Org XInput driver, version 19.2
[ 9.780] (II) Using input driver 'evdev' for 'Power Button'
[ 9.780] (**) Power Button: always reports core events
[ 9.780] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 9.780] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 9.780] (--) evdev: Power Button: Found keys
[ 9.780] (II) evdev: Power Button: Configuring as keyboard
[ 9.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 9.780] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 9.780] (**) Option "xkb_rules" "evdev"
[ 9.780] (**) Option "xkb_model" "pc104"
[ 9.780] (**) Option "xkb_layout" "fr"
[ 9.780] (**) Option "xkb_variant" "oss"
[ 9.793] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 9.793] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 9.793] (**) Video Bus: Applying InputClass "system-keyboard"
[ 9.793] (II) Using input driver 'evdev' for 'Video Bus'
[ 9.793] (**) Video Bus: always reports core events
[ 9.793] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 9.793] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 9.793] (--) evdev: Video Bus: Found keys
[ 9.793] (II) evdev: Video Bus: Configuring as keyboard
[ 9.793] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9/event8"
[ 9.793] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 9.793] (**) Option "xkb_rules" "evdev"
[ 9.793] (**) Option "xkb_model" "pc104"
[ 9.793] (**) Option "xkb_layout" "fr"
[ 9.794] (**) Option "xkb_variant" "oss"
[ 9.794] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 9.794] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 9.794] (**) Video Bus: Applying InputClass "system-keyboard"
[ 9.794] (II) Using input driver 'evdev' for 'Video Bus'
[ 9.794] (**) Video Bus: always reports core events
[ 9.794] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 9.794] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 9.794] (--) evdev: Video Bus: Found keys
[ 9.794] (II) evdev: Video Bus: Configuring as keyboard
[ 9.794] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4a/LNXVIDEO:00/input/input8/event7"
[ 9.794] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 9.794] (**) Option "xkb_rules" "evdev"
[ 9.794] (**) Option "xkb_model" "pc104"
[ 9.794] (**) Option "xkb_layout" "fr"
[ 9.794] (**) Option "xkb_variant" "oss"
[ 9.794] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 9.795] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 9.795] (**) Power Button: Applying InputClass "system-keyboard"
[ 9.795] (II) Using input driver 'evdev' for 'Power Button'
[ 9.795] (**) Power Button: always reports core events
[ 9.795] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 9.795] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 9.795] (--) evdev: Power Button: Found keys
[ 9.795] (II) evdev: Power Button: Configuring as keyboard
[ 9.795] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 9.795] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 9.795] (**) Option "xkb_rules" "evdev"
[ 9.795] (**) Option "xkb_model" "pc104"
[ 9.795] (**) Option "xkb_layout" "fr"
[ 9.795] (**) Option "xkb_variant" "oss"
[ 9.795] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 9.795] (II) No input driver specified, ignoring this device.
[ 9.795] (II) This device may have been added with another device file.
[ 9.795] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 9.795] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 9.795] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 9.795] (II) Using input driver 'evdev' for 'Sleep Button'
[ 9.795] (**) Sleep Button: always reports core events
[ 9.795] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 9.795] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 9.795] (--) evdev: Sleep Button: Found keys
[ 9.795] (II) evdev: Sleep Button: Configuring as keyboard
[ 9.795] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 9.795] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 9.795] (**) Option "xkb_rules" "evdev"
[ 9.795] (**) Option "xkb_model" "pc104"
[ 9.795] (**) Option "xkb_layout" "fr"
[ 9.795] (**) Option "xkb_variant" "oss"
[ 9.796] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event22)
[ 9.796] (II) No input driver specified, ignoring this device.
[ 9.796] (II) This device may have been added with another device file.
[ 9.796] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event21)
[ 9.796] (II) No input driver specified, ignoring this device.
[ 9.796] (II) This device may have been added with another device file.
[ 9.796] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event20)
[ 9.796] (II) No input driver specified, ignoring this device.
[ 9.796] (II) This device may have been added with another device file.
[ 9.796] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event19)
[ 9.797] (II) No input driver specified, ignoring this device.
[ 9.797] (II) This device may have been added with another device file.
[ 9.797] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event18)
[ 9.797] (II) No input driver specified, ignoring this device.
[ 9.797] (II) This device may have been added with another device file.
[ 9.797] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event17)
[ 9.797] (II) No input driver specified, ignoring this device.
[ 9.797] (II) This device may have been added with another device file.
[ 9.797] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 9.797] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event11)
[ 9.797] (II) No input driver specified, ignoring this device.
[ 9.797] (II) This device may have been added with another device file.
[ 9.798] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event10)
[ 9.798] (II) No input driver specified, ignoring this device.
[ 9.798] (II) This device may have been added with another device file.
[ 9.798] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event9)
[ 9.798] (II) No input driver specified, ignoring this device.
[ 9.798] (II) This device may have been added with another device file.
[ 9.798] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event16)
[ 9.798] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 9.798] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "system-keyboard"
[ 9.798] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[ 9.798] (**) Laptop_Integrated_Webcam_HD: always reports core events
[ 9.798] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event16"
[ 9.798] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0xc45 Product 0x64d0
[ 9.798] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[ 9.798] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[ 9.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input17/event16"
[ 9.798] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[ 9.798] (**) Option "xkb_rules" "evdev"
[ 9.798] (**) Option "xkb_model" "pc104"
[ 9.798] (**) Option "xkb_layout" "fr"
[ 9.798] (**) Option "xkb_variant" "oss"
[ 9.799] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event15)
[ 9.799] (II) No input driver specified, ignoring this device.
[ 9.799] (II) This device may have been added with another device file.
[ 9.799] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event14)
[ 9.799] (II) No input driver specified, ignoring this device.
[ 9.799] (II) This device may have been added with another device file.
[ 9.799] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event13)
[ 9.799] (II) No input driver specified, ignoring this device.
[ 9.799] (II) This device may have been added with another device file.
[ 9.799] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event12)
[ 9.799] (II) No input driver specified, ignoring this device.
[ 9.799] (II) This device may have been added with another device file.
[ 9.799] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 9.799] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 9.799] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 9.799] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 9.799] (**) AT Translated Set 2 keyboard: always reports core events
[ 9.799] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 9.799] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 9.799] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 9.799] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 9.799] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 9.799] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 9.799] (**) Option "xkb_rules" "evdev"
[ 9.799] (**) Option "xkb_model" "pc104"
[ 9.799] (**) Option "xkb_layout" "fr"
[ 9.799] (**) Option "xkb_variant" "oss"
[ 9.800] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event6)
[ 9.800] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 9.800] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 9.800] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[ 9.800] (II) LoadModule: "synaptics"
[ 9.800] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 9.800] (II) Module synaptics: vendor="X.Org Foundation"
[ 9.800] compiled for 1.14.4, module version = 1.7.4
[ 9.800] Module class: X.Org XInput Driver
[ 9.800] ABI class: X.Org XInput driver, version 19.2
[ 9.800] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 9.800] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 9.800] (**) Option "Device" "/dev/input/event6"
[ 9.824] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: ignoring touch events for semi-multitouch device
[ 9.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 2000 (res 0)
[ 9.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 1400 (res 0)
[ 9.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[ 9.824] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[ 9.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle double triple
[ 9.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[ 9.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
[ 9.824] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 9.824] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 9.838] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 9.838] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 13)
[ 9.838] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 9.838] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed is now 1.75
[ 9.838] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) AccelFactor is now 0.082
[ 9.838] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[ 9.838] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[ 9.838] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 9.838] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 9.838] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 9.838] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
[ 9.838] (II) No input driver specified, ignoring this device.
[ 9.838] (II) This device may have been added with another device file.
[ 9.838] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event5)
[ 9.839] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 9.839] (II) Using input driver 'evdev' for 'DualPoint Stick'
[ 9.839] (**) DualPoint Stick: always reports core events
[ 9.839] (**) evdev: DualPoint Stick: Device: "/dev/input/event5"
[ 9.839] (--) evdev: DualPoint Stick: Vendor 0x2 Product 0x8
[ 9.839] (--) evdev: DualPoint Stick: Found 3 mouse buttons
[ 9.839] (--) evdev: DualPoint Stick: Found relative axes
[ 9.839] (--) evdev: DualPoint Stick: Found x and y relative axes
[ 9.839] (II) evdev: DualPoint Stick: Configuring as mouse
[ 9.839] (**) evdev: DualPoint Stick: YAxisMapping: buttons 4 and 5
[ 9.839] (**) evdev: DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 9.839] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event5"
[ 9.839] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 14)
[ 9.839] (II) evdev: DualPoint Stick: initialized for relative axes.
[ 9.839] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
[ 9.839] (**) DualPoint Stick: (accel) acceleration profile 0
[ 9.839] (**) DualPoint Stick: (accel) acceleration factor: 2.000
[ 9.839] (**) DualPoint Stick: (accel) acceleration threshold: 4
[ 9.839] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse0)
[ 9.839] (II) No input driver specified, ignoring this device.
[ 9.839] (II) This device may have been added with another device file.
[ 9.839] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event23)
[ 9.839] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 9.839] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[ 9.839] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 9.839] (**) Dell WMI hotkeys: always reports core events
[ 9.839] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event23"
[ 9.839] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 9.839] (--) evdev: Dell WMI hotkeys: Found keys
[ 9.839] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 9.839] (**) Option "config_info" "udev:/sys/devices/virtual/input/input24/event23"
[ 9.839] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)
[ 9.839] (**) Option "xkb_rules" "evdev"
[ 9.839] (**) Option "xkb_model" "pc104"
[ 9.839] (**) Option "xkb_layout" "fr"
[ 9.839] (**) Option "xkb_variant" "oss"
[ 9.843] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 10.430] (II) fglrx(0): EDID vendor "LGD", prod id 812
[ 10.430] (II) fglrx(0): Printing DDC gathered Modelines:
[ 10.430] (II) fglrx(0): Modeline "1920x1080"x0.0 139.00 1920 1952 2016 2080 1080 1083 1089 1111 -hsync -vsync (66.8 kHz eP)
[ 10.430] (II) fglrx(0): Modeline "1920x1080"x0.0 128.50 1920 2080 2320 2608 1080 1094 1102 1230 -hsync -vsync (49.3 kHz e)
[ 16.413] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 16.414] (II) fglrx(0): Backup framebuffer data.
[ 16.454] (II) fglrx(0): Backup complete.