bonsoir,
Je souhaite installer ma carte wifi, pour celle si il fau que j'install les pilotes avec ndiswrapper.
Lorsque je l'installe avec yum, tout ce passe bien. Quand je veux l'utiliser, il me di command not found.
J'ai alors tenté de l'installer manuellement via le RPM. Mais celui a besoin des sources. J'ai donc installer les source selon ce tuto:
[color=000099]
Fedora no longer ships with the kernel-source RPM. You must install it
separately. This is NOT needed unless you wish to re-compile your
kernel.
Kernel Headers (kernel-devel)
If you need to install a driver (Nvidia, ndiswrapper, Cisco VPN, etc.) that
requires kernel sources, it may be sufficient to install just the kernel headers
package (kernel-devel RPM). This can be found on CD4, the DVD or online. If you
have updated your kernel (using yum or up2date), then use yum to install the
package ('yum install kernel-devel'). Make sure to match your current kernel
version (read below for the 'uname' command).
The default kernel source can be found through any mirror. Look in the
directory "/4/i386/os/SRPMS/". An example from Fedora:
http://download.fedora.redhat.com/pub/fedora/linux/core/4/i386/os/SRPMS/.
If you are using an updated kernel you can also look in the update directory
on most Fedora mirror sites. For example:
http://download.fedora.redhat.com/pub/fedora/linux/core/updates/4/SRPMS/.
If you wish you you can obtain the source of your current running kernel.
Use the 'uname' command.
[root@charon fc4]# uname -r
2.6.11-1.1369_FC4
Select: kernel-2.6.11-1.1369_FC4.src.rpm 03-Jun-2005 13:32 41M
Install:
[root@charon fc4]# rpm -ivh kernel-2.6.11-1.1369_FC4.src.rpm
1:kernel ########################################### [100%]
Set it up:
[root@charon fc4]# rpmbuild -bp --target=noarch /usr/src/redhat/SPECS/kernel-2.6.spec
The source files will be properly located in '/usr/src/redhat/BUILD/kernel-2.6.11/'
This is clearly explained in the FC4 Release Notes - Kernel.
General instructions to recompile a 2.6.x kernel in Fedora can be found in
my Fedora Core 4 Kernel Compile Notes.[/color]
Mais lorsque qu'il me demande d'effectuer: rpmbuild -bp --target=noarch /usr/src/redhat/SPECS/kernel-2.6.spec
il me di que rpmbuild n'est pas reconnu.
T_T
Je ne sais pas comment l'installer je le trouve nulpar..
Merci de preter attention a mon poste, et de m'aider..