Me revoilà, n'étant plus sous Fedora, je ne peux vous donner le dmesg | grep prism.
Donc, j'ai une idée : je donne le lsmod et le dmesg d'Ubuntu, puisque cette distro contient les fichiers adéquat au fonctionnement de ma carte wifi, vous pourriez peut-être me dire quels fichiers je dois utiliser et où les installer.
DMESG :
[ 19.631519] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 19.631686] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.631703] pnp: PnP ACPI init
[ 19.634740] pnp: PnP ACPI: found 9 devices
[ 19.634746] PnPBIOS: Disabled by ACPI PNP
[ 19.634845] PCI: Using ACPI for IRQ routing
[ 19.634849] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.637044] NET: Registered protocol family 8
[ 19.637046] NET: Registered protocol family 20
[ 19.637703] PCI: Bridge: 0000:00:01.0
[ 19.637707] IO window: c000-cfff
[ 19.637713] MEM window: dfe00000-dfefffff
[ 19.637717] PREFETCH window: 9fd00000-dfcfffff
[ 19.637736] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 19.637777] NET: Registered protocol family 2
[ 19.662911] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 19.663039] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 19.663311] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 19.663451] TCP: Hash tables configured (established 16384 bind 8192)
[ 19.663455] TCP reno registered
[ 19.674936] checking if image is initramfs... it is
[ 20.320762] Freeing initrd memory: 6787k freed
[ 20.321399] audit: initializing netlink socket (disabled)
[ 20.321419] audit(1198256684.424:1): initialized
[ 20.321560] VFS: Disk quotas dquot_6.5.1
[ 20.321583] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.321650] io scheduler noop registered
[ 20.321653] io scheduler anticipatory registered
[ 20.321656] io scheduler deadline registered
[ 20.321664] io scheduler cfq registered (default)
[ 20.322027] isapnp: Scanning for PnP cards...
[ 20.675211] isapnp: No Plug & Play device found
[ 20.706215] Real Time Clock Driver v1.12ac
[ 20.706276] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.706397] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.707277] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.707628] mice: PS/2 mouse device common for all mice
[ 20.708335] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.708657] input: Macintosh mouse button emulation as /class/input/input0
[ 20.708698] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 20.708703] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 20.709057] PNP: No PS/2 controller found. Probing ports directly.
[ 20.709578] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.709584] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.709742] EISA: Probing bus 0 at eisa.0
[ 20.709781] EISA: Detected 0 cards.
[ 20.740002] TCP cubic registered
[ 20.740013] NET: Registered protocol family 1
[ 20.740043] Using IPI No-Shortcut mode
[ 20.740179] ACPI: (supports S0 S1 S4 S5)
[ 20.740226] Magic number: 3:930:87
[ 20.740975] Freeing unused kernel memory: 328k freed
[ 20.741192] Time: tsc clocksource has been installed.
[ 22.004251] Capability LSM initialized
[ 22.052592] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 22.690598] usbcore: registered new interface driver usbfs
[ 22.690642] usbcore: registered new interface driver hub
[ 22.690672] usbcore: registered new device driver usb
[ 22.691871] USB Universal Host Controller Interface driver v3.0
[ 22.691962] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 16
[ 22.691978] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 22.692185] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 22.692223] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000e400
[ 22.692397] usb usb1: configuration #1 chosen from 1 choice
[ 22.692430] hub 1-0:1.0: USB hub found
[ 22.692446] hub 1-0:1.0: 2 ports detected
[ 22.757479] SCSI subsystem initialized
[ 22.763514] libata version 2.20 loaded.
[ 22.794555] ACPI: PCI Interrupt 0000:00:10.1[b] -> GSI 21 (level, low) -> IRQ 16
[ 22.794573] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 22.794608] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 22.794638] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000e800
[ 22.794755] usb usb2: configuration #1 chosen from 1 choice
[ 22.794786] hub 2-0:1.0: USB hub found
[ 22.794800] hub 2-0:1.0: 2 ports detected
[ 22.857811] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[ 22.901336] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 16
[ 22.901355] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 22.901387] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 22.901417] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000ec00
[ 22.901552] usb usb3: configuration #1 chosen from 1 choice
[ 22.901585] hub 3-0:1.0: USB hub found
[ 22.901600] hub 3-0:1.0: 2 ports detected
[ 22.919368] FDC 0 is a post-1991 82077
[ 23.004902] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 16
[ 23.004929] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 23.005008] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 23.005084] ehci_hcd 0000:00:10.3: irq 16, io mem 0xdfffdf00
[ 23.005091] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.005235] usb usb4: configuration #1 chosen from 1 choice
[ 23.005274] hub 4-0:1.0: USB hub found
[ 23.005289] hub 4-0:1.0: 6 ports detected
[ 23.109671] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 23.109711] ACPI: Unable to derive IRQ for device 0000:00:11.1
[ 23.109714] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[ 23.109728] VP_IDE: chipset revision 6
[ 23.109730] VP_IDE: not 100% native mode: will probe irqs later
[ 23.109743] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[ 23.109752] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
[ 23.109768] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
[ 23.109776] Probing IDE interface ide0...
[ 23.525324] hda: WDC WD200BB-32CAA0, ATA DISK drive
[ 23.804919] hdb: Maxtor 6Y080L0, ATA DISK drive
[ 23.862720] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 23.883083] Probing IDE interface ide1...
[ 24.268177] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 24.422472] usb 1-2: configuration #1 chosen from 1 choice
[ 24.448150] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 17
[ 24.452405] eth0: VIA Rhine II at 0x1dc00, 00:0d:87:ec:03:5c, IRQ 17.
[ 24.453121] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 24.461662] hda: max request size: 128KiB
[ 24.468761] hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
[ 24.468772] hda: cache flushes not supported
[ 24.468838] hda: hda1 hda2 < hda5 >
[ 24.498501] hdb: max request size: 128KiB
[ 24.498639] hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[ 24.498768] hdb: cache flushes supported
[ 24.498808] hdb: hdb1 hdb2 < hdb5 >
[ 24.663642] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 24.836350] usb 2-1: configuration #1 chosen from 1 choice
[ 24.839498] usbcore: registered new interface driver hiddev
[ 24.851815] input: HID 04b3:310b as /class/input/input1
[ 24.851842] input: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:10.0-2
[ 24.866419] input: USB-compliant keyboard as /class/input/input2
[ 24.866445] input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:10.1-1
[ 24.879438] input: USB-compliant keyboard as /class/input/input3
[ 24.879462] input: USB HID v1.10 Device [USB-compliant keyboard] on usb-0000:00:10.1-1
[ 24.879492] usbcore: registered new interface driver usbhid
[ 24.879497] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 24.918393] Attempting manual resume
[ 24.918400] swsusp: Resume From Partition 3:5
[ 24.918402] PM: Checking swsusp image.
[ 24.918579] PM: Resume from disk failed.
[ 24.939466] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 24.939473] EXT3-fs: write access will be enabled during recovery.
[ 29.222924] kjournald starting. Commit interval 5 seconds
[ 29.222952] EXT3-fs: recovery complete.
[ 29.223195] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.820339] irda_init()
[ 41.820371] NET: Registered protocol family 23
[ 41.971199] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 18
[ 42.144744] Linux agpgart interface v0.102 (c) Dave Jones
[ 42.352064] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 42.461698] parport: PnPBIOS parport detected.
[ 42.461778] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 42.686090] input: PC Speaker as /class/input/input4
[ 42.788718] p54: LM86 firmware
[ 43.757711] wmaster0: Selected rate control algorithm 'simple'
[ 43.821239] wiphy0: hwaddr 00:04:e2:a5:94:e0, isl3890
[ 43.821398] agpgart: Detected VIA KM400/KM400A chipset
[ 43.826412] agpgart: AGP aperture is 64M @ 0xe0000000
[ 43.826631] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 43.828416] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
[ 43.828564] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 43.993209] wmaster0: Does not support passive scan, disabled
[ 44.010467] wlan0: starting scan
[ 44.102246] NET: Registered protocol family 10
[ 44.102379] lo: Disabled Privacy Extensions
[ 44.562295] fuse init (API version 7.8)
[ 44.592422] lp0: using parport0 (interrupt-driven).
[ 44.636026] Adding 859436k swap on /dev/disk/by-uuid/576787d1-d25c-4a34-b4e9-6d5f29112f59. Priority:-1 extents:1 across:859436k
[ 44.666831] wlan0: scan completed
[ 44.666883] wlan0: Initial auth_alg=0
[ 44.666888] wlan0: authenticate with AP 00:16:38:84:28:f8
[ 44.670749] wlan0: RX authentication from 00:16:38:84:28:f8 (alg=0 transaction=2 status=0)
[ 44.670756] wlan0: authenticated
[ 44.670760] wlan0: associate with AP 00:16:38:84:28:f8
[ 44.672604] wlan0: RX AssocResp from 00:16:38:84:28:f8 (capab=0x411 status=0 aid=1)
[ 44.672610] wlan0: associated
[ 44.745927] EXT3 FS on hda1, internal journal
[ 46.316116] NET: Registered protocol family 17
[ 49.235888] Using specific hotkey driver
[ 49.466559] ibm_acpi: ec object not found
[ 49.564124] input: Power Button (FF) as /class/input/input5
[ 49.570216] ACPI: Power Button (FF) [PWRF]
[ 49.610294] input: Power Button (CM) as /class/input/input6
[ 49.616387] ACPI: Power Button (CM) [PWRB]
[ 49.656647] input: Sleep Button (CM) as /class/input/input7
[ 49.662665] ACPI: Sleep Button (CM) [SLPB]
[ 49.684640] No dock devices found.
[ 49.755042] pcc_acpi: loading...
[ 53.673358] wlan0: starting scan
[ 53.691406] eth0: link down
[ 53.691755] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 54.332920] wlan0: scan completed
[ 54.740322] wlan0: no IPv6 routers present
[ 54.752078] [drm] Initialized drm 1.1.0 20060810
[ 54.767201] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 54.771511] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 55.639718] ppdev: user-space parallel port driver
[ 56.433432] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 56.433595] agpgart: BIOS bug. AGP bridge claims to only support x4 rateFixing up support for x2 & x1
[ 56.433602] agpgart: Device is in legacy mode, falling back to 2.x
[ 56.433609] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 56.433653] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 57.020019] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 57.020027] apm: overridden by ACPI.
[ 57.337449] Bluetooth: Core ver 2.11
[ 57.337549] NET: Registered protocol family 31
[ 57.337551] Bluetooth: HCI device and connection manager initialized
[ 57.337556] Bluetooth: HCI socket layer initialized
[ 57.422562] Bluetooth: L2CAP ver 2.8
[ 57.422569] Bluetooth: L2CAP socket layer initialized
[ 57.439601] Bluetooth: RFCOMM socket layer initialized
[ 57.439625] Bluetooth: RFCOMM TTY layer initialized
[ 57.439627] Bluetooth: RFCOMM ver 1.8
[ 72.735543] [drm] Setting GART location based on new memory map
[ 72.735559] [drm] Loading R300 Microcode
[ 72.735602] [drm] writeback test succeeded in 1 usecs
[ 123.221558] kjournald starting. Commit interval 5 seconds
[ 123.222230] EXT3 FS on hdb1, internal journal
[ 123.222235] EXT3-fs: recovery complete.
[ 123.222840] EXT3-fs: mounted filesystem with ordered data mode.
[11500.943220] NET: Unregistered protocol family 23
[11501.156131] ACPI: PCI interrupt for device 0000:00:12.0 disabled
[11501.259948] ACPI: PCI interrupt for device 0000:00:09.0 disabled
[11503.750784] PM: suspend-to-disk mode set to 'shutdown'
[11503.751432] Disabling non-boot CPUs ...
[11503.751437] Stopping tasks ... done.
[11503.811662] Shrinking memory... done (51508 pages freed)
[11505.107220] Freed 206032 kbytes in 1.29 seconds (159.71 MB/s)
[11505.107224] Suspending console(s)
[11505.107230] platform bluetooth: freeze
[11505.107245] ac97 0-0:CMI9761A+: freeze
[11505.107256] usbhid 2-1:1.1: freeze
[11505.107260] usbhid 2-1:1.0: freeze
[11505.107263] usb 2-1: freeze
[11505.129200] usbhid 1-2:1.0: freeze
[11505.129204] usb 1-2: freeze
[11505.149169] ide-disk 0.1: freeze
[11505.153654] ide-disk 0.0: freeze
[11505.569806] usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2
[11505.569814] hub 4-0:1.0: PM: suspend 2-->1
[11505.569816] hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2
[11505.569820] usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2
[11505.569823] usb usb4: PM: suspend 2-->1
[11505.569826] usbdev3.1_ep81: PM: suspend 0->1, parent 3-0:1.0 already 2
[11505.569829] hub 3-0:1.0: PM: suspend 2-->1
[11505.569831] hub 3-0:1.0: PM: suspend 2->1, parent usb3 already 2
[11505.569834] usbdev3.1_ep00: PM: suspend 0->1, parent usb3 already 2
[11505.569837] usb usb3: PM: suspend 2-->1
[11505.569841] hub 2-0:1.0: freeze
[11505.569844] usb usb2: freeze
[11505.569867] hub 1-0:1.0: freeze
[11505.569870] usb usb1: freeze
[11505.569885] platform vesafb.0: freeze
[11505.569891] platform eisa.0: freeze
[11505.569894] i8042 i8042: freeze
[11505.569913] serial8250 serial8250: freeze
[11505.570219] pcspkr pcspkr: freeze
[11505.570233] pnp 00:08: freeze
[11505.570236] pnp 00:07: freeze
[11505.570238] pnp 00:06: freeze
[11505.570240] pnp 00:05: freeze
[11505.570242] system 00:04: freeze
[11505.570245] parport_pc 00:03: freeze
[11505.570505] pnp: Device 00:03 disabled.
[11505.570508] serial 00:02: freeze
[11505.570681] pnp: Device 00:02 disabled.
[11505.570683] pnp 00:01: freeze
[11505.570686] pnp 00:00: freeze
[11505.570689] pci 0000:01:00.1: freeze
[11505.570720] pci 0000:01:00.0: freeze
[11505.570753] pci 0000:00:12.0: freeze
[11505.570785] VIA 82xx Audio 0000:00:11.5: freeze
[11505.571369] ACPI: PCI interrupt for device 0000:00:11.5 disabled
[11505.588540] VIA_IDE 0000:00:11.1: freeze
[11505.588573] pci 0000:00:11.0: freeze
[11505.588607] ehci_hcd 0000:00:10.3: freeze
[11505.588646] ACPI: PCI interrupt for device 0000:00:10.3 disabled
[11505.604524] uhci_hcd 0000:00:10.2: freeze
[11505.604562] ACPI: PCI interrupt for device 0000:00:10.2 disabled
[11505.620500] uhci_hcd 0000:00:10.1: freeze
[11505.620537] ACPI: PCI interrupt for device 0000:00:10.1 disabled
[11505.636477] uhci_hcd 0000:00:10.0: freeze
[11505.636513] ACPI: PCI interrupt for device 0000:00:10.0 disabled
[11505.652454] pci 0000:00:09.0: freeze
[11505.652487] pci 0000:00:01.0: freeze
[11505.652514] agpgart-via 0000:00:00.0: freeze
[11505.652547] pci_set_power_state(): 0000:00:00.0: state=3, current state=5
[11505.652551] acpi acpi: freeze
[11505.652565] PM: snapshotting memory.
[11505.652568] platform bluetooth: LATE freeze
[11505.652584] platform vesafb.0: LATE freeze
[11505.652588] platform eisa.0: LATE freeze
[11505.652590] i8042 i8042: LATE freeze
[11505.652594] serial8250 serial8250: LATE freeze
[11505.652734] pcspkr pcspkr: LATE freeze
[11505.652739] pci 0000:01:00.1: LATE freeze
[11505.652741] pci 0000:01:00.0: LATE freeze
[11505.652743] pci 0000:00:12.0: LATE freeze
[11505.652745] VIA 82xx Audio 0000:00:11.5: LATE freeze
[11505.652748] VIA_IDE 0000:00:11.1: LATE freeze
[11505.652750] pci 0000:00:11.0: LATE freeze
[11505.652751] pci 0000:00:09.0: LATE freeze
[11505.652754] pci 0000:00:01.0: LATE freeze
[11505.652756] agpgart-via 0000:00:00.0: LATE freeze
[11505.653091] swsusp: critical section:
[11505.674571] swsusp: Need to copy 64406 pages
[11505.674576] swsusp: Normal pages needed: 64406 + 1024 + 14, available pages: 66648
[ 36.853034] agpgart-via 0000:00:00.0: EARLY resume
[ 36.853044] pci 0000:00:01.0: EARLY resume
[ 36.853047] pci 0000:00:09.0: EARLY resume
[ 36.853049] uhci_hcd 0000:00:10.0: EARLY resume
[ 36.853052] uhci_hcd 0000:00:10.1: EARLY resume
[ 36.853054] uhci_hcd 0000:00:10.2: EARLY resume
[ 36.853057] ehci_hcd 0000:00:10.3: EARLY resume
[ 36.853060] pci 0000:00:11.0: EARLY resume
[ 36.853063] VIA_IDE 0000:00:11.1: EARLY resume
[ 36.853065] VIA 82xx Audio 0000:00:11.5: EARLY resume
[ 36.853068] pci 0000:00:12.0: EARLY resume
[ 36.853070] pci 0000:01:00.0: EARLY resume
[ 36.853072] pci 0000:01:00.1: EARLY resume
[ 36.853079] pcspkr pcspkr: EARLY resume
[ 36.853174] serial8250 serial8250: EARLY resume
[ 36.853177] i8042 i8042: EARLY resume
[ 36.853179] platform eisa.0: EARLY resume
[ 36.853182] platform vesafb.0: EARLY resume
[ 36.853196] platform bluetooth: EARLY resume
[ 37.293368] PM: Image restored successfully.
[ 37.305873] acpi acpi: resuming
[ 37.306075] agpgart-via 0000:00:00.0: resuming
[ 37.306125] pci 0000:00:01.0: resuming
[ 37.306159] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 37.306163] pci 0000:00:09.0: resuming
[ 37.306181] PM: Writing back config space on device 0000:00:09.0 at offset 3 (was 2008, writing 2010)
[ 37.306187] PM: Writing back config space on device 0000:00:09.0 at offset 1 (was 2980016, writing 2980012)
[ 37.306200] uhci_hcd 0000:00:10.0: resuming
[ 37.319005] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 16
[ 37.319052] usb usb1: root hub lost power or was reset
[ 37.319067] uhci_hcd 0000:00:10.1: resuming
[ 37.334972] ACPI: PCI Interrupt 0000:00:10.1[b] -> GSI 21 (level, low) -> IRQ 16
[ 37.335015] usb usb2: root hub lost power or was reset
[ 37.335028] uhci_hcd 0000:00:10.2: resuming
[ 37.350949] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 16
[ 37.350992] usb usb3: root hub lost power or was reset
[ 37.351005] ehci_hcd 0000:00:10.3: resuming
[ 37.366927] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 16
[ 37.366958] usb usb4: root hub lost power or was reset
[ 37.366972] pci 0000:00:11.0: resuming
[ 37.367023] VIA_IDE 0000:00:11.1: resuming
[ 37.367060] ACPI: Unable to derive IRQ for device 0000:00:11.1
[ 37.367063] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[ 37.367066] VIA 82xx Audio 0000:00:11.5: resuming
[ 37.382930] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
[ 37.382936] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 37.385885] pci 0000:00:12.0: resuming
[ 37.385905] PM: Writing back config space on device 0000:00:12.0 at offset 1 (was 2100017, writing 2100013)
[ 37.385917] pci 0000:01:00.0: resuming
[ 37.385952] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 37.385956] pci 0000:01:00.1: resuming
[ 37.385979] pnp 00:00: resuming
[ 37.385981] pnp 00:01: resuming
[ 37.385983] serial 00:02: resuming
[ 37.387083] pnp: Device 00:02 activated.
[ 37.387090] parport_pc 00:03: resuming
[ 37.388298] pnp: Device 00:03 activated.
[ 37.388301] system 00:04: resuming
[ 37.388304] pnp 00:05: resuming
[ 37.388306] pnp 00:06: resuming
[ 37.388308] pnp 00:07: resuming
[ 37.388310] pnp 00:08: resuming
[ 37.388318] pcspkr pcspkr: resuming
[ 37.388571] serial8250 serial8250: resuming
[ 37.388582] i8042 i8042: resuming
[ 37.388614] serio serio0: resuming
[ 37.388619] platform eisa.0: resuming
[ 37.388622] serio serio1: resuming
[ 37.388626] platform vesafb.0: resuming
[ 37.388628] usb usb1: resuming
[ 37.426842] hub 1-0:1.0: resuming
[ 37.426845] usb usb2: resuming
[ 37.466783] hub 2-0:1.0: resuming
[ 37.466786] usb usb3: resuming
[ 37.506727] usb usb4: resuming
[ 37.542676] ide-disk 0.0: resuming
[ 37.551640] ide-disk 0.1: resuming
[ 37.554248] usb 1-2: resuming
[ 37.554251] usbdev1.2_ep00: PM: resume from 0, parent 1-2 still 1
[ 37.554256] usbhid 1-2:1.0: PM: resume from 1, parent 1-2 still 1
[ 37.554258] usbhid 1-2:1.0: resuming
[ 37.554261] usbdev1.2_ep81: PM: resume from 0, parent 1-2:1.0 still 1
[ 37.554263] usb 2-1: resuming
[ 37.554266] usbdev2.2_ep00: PM: resume from 0, parent 2-1 still 1
[ 37.554269] usbhid 2-1:1.0: PM: resume from 1, parent 2-1 still 1
[ 37.554271] usbhid 2-1:1.0: resuming
[ 37.554273] usbdev2.2_ep81: PM: resume from 0, parent 2-1:1.0 still 1
[ 37.554276] usbhid 2-1:1.1: PM: resume from 1, parent 2-1 still 1
[ 37.554278] usbhid 2-1:1.1: resuming
[ 37.554280] usbdev2.2_ep82: PM: resume from 0, parent 2-1:1.1 still 1
[ 37.554291] ac97 0-0:CMI9761A+: resuming
[ 37.554303] platform bluetooth: resuming
[ 37.554480] Restarting tasks ... done.
[ 37.582143] Enabling non-boot CPUs ...
[ 37.682508] usb 1-2: USB disconnect, address 2
[ 37.810314] usb 2-1: USB disconnect, address 2
[ 38.928702] usb 1-2: new low speed USB device using uhci_hcd and address 3
[ 39.083179] usb 1-2: configuration #1 chosen from 1 choice
[ 39.099207] input: HID 04b3:310b as /class/input/input8
[ 39.099273] input: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:10.0-2
[ 39.336123] usb 2-1: new low speed USB device using uhci_hcd and address 3
[ 39.508469] usb 2-1: configuration #1 chosen from 1 choice
[ 39.526541] input: USB-compliant keyboard as /class/input/input9
[ 39.526591] input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:10.1-1
[ 39.538520] input: USB-compliant keyboard as /class/input/input10
[ 39.538571] input: USB HID v1.10 Device [USB-compliant keyboard] on usb-0000:00:10.1-1
[ 42.413040] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[ 42.413546] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 17
[ 42.418094] eth0: VIA Rhine II at 0x1dc00, 00:0d:87:ec:03:5c, IRQ 17.
[ 42.418822] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 42.717518] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 18
[ 42.942392] eth0: link down
[ 42.942559] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.988247] p54: LM86 firmware
[ 43.907911] wmaster0: Selected rate control algorithm 'simple'
[ 43.908064] wiphy1: hwaddr 00:04:e2:a5:94:e0, isl3890
[ 44.078782] wmaster0: Does not support passive scan, disabled
[ 44.193424] wlan0: starting scan
[ 44.852167] wlan0: scan completed
[ 44.852223] wlan0: Initial auth_alg=0
[ 44.852228] wlan0: authenticate with AP 00:16:38:84:28:f8
[ 44.856037] wlan0: RX authentication from 00:16:38:84:28:f8 (alg=0 transaction=2 status=0)
[ 44.856042] wlan0: authenticated
[ 44.856046] wlan0: associate with AP 00:16:38:84:28:f8
[ 44.857854] wlan0: RX AssocResp from 00:16:38:84:28:f8 (capab=0x411 status=0 aid=1)
[ 44.857858] wlan0: associated
[ 46.540269] input: Power Button (FF) as /class/input/input11
[ 46.541014] ACPI: Power Button (FF) [PWRF]
[ 46.541886] input: Power Button (CM) as /class/input/input12
[ 46.542590] ACPI: Power Button (CM) [PWRB]
[ 46.543414] input: Sleep Button (CM) as /class/input/input13
[ 46.544101] ACPI: Sleep Button (CM) [SLPB]
[ 47.634321] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 54.326361] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 54.326532] agpgart: BIOS bug. AGP bridge claims to only support x4 rateFixing up support for x2 & x1
[ 54.326540] agpgart: Device is in legacy mode, falling back to 2.x
[ 54.326853] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 54.326898] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 54.326914] [drm] Loading R300 Microcode
[ 54.474313] wlan0: no IPv6 routers present
[10578.426203] wlan0: RX deauthentication from 00:16:38:84:28:f8 (reason=7)
[10578.426212] wlan0: deauthenticated
[10579.426753] wlan0: authenticate with AP 00:16:38:84:28:f8
[10579.428205] wlan0: RX authentication from 00:16:38:84:28:f8 (alg=0 transaction=2 status=0)
[10579.428214] wlan0: authenticated
[10579.428217] wlan0: associate with AP 00:16:38:84:28:f8
[10579.430097] wlan0: RX ReassocResp from 00:16:38:84:28:f8 (capab=0x411 status=0 aid=1)
[10579.430102] wlan0: associated
Et voilà LSMOD :
kenshin@kenshin-linux:~$ lsmod
Module Size Used by
battery 10756 0
ac 6020 0
thermal 14856 0
processor 31048 1 thermal
fan 5636 0
button 8720 0
prism54pci 13440 0
prism54common 12288 1 prism54pci
via_rhine 25608 0
mii 6528 1 via_rhine
binfmt_misc 12680 1
rfcomm 40856 0
l2cap 25856 5 rfcomm
bluetooth 55908 4 rfcomm,l2cap
ppdev 10116 0
radeon 124576 3
drm 81044 4 radeon
cpufreq_stats 7360 0
cpufreq_userspace 5408 0
cpufreq_ondemand 9228 0
freq_table 5792 2 cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 8200 0
cpufreq_powersave 2688 0
pcc_acpi 13184 0
dev_acpi 12292 0
sony_acpi 6284 0
tc1100_wmi 8068 0
dock 10268 0
asus_acpi 17308 0
video 16388 0
backlight 7040 1 asus_acpi
sbs 15652 0
i2c_ec 6016 1 sbs
container 5248 0
af_packet 23816 4
lp 12452 0
fuse 46612 0
ipv6 269088 8
arc4 2944 2
ecb 4480 2
blkcipher 6784 1 ecb
rc80211_simple 6400 1
snd_via82xx 29208 1
gameport 16520 1 snd_via82xx
snd_ac97_codec 98464 1 snd_via82xx
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44544 0
snd_mixer_oss 17408 1 snd_pcm_oss
snd_pcm 79876 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 10888 2 snd_via82xx,snd_pcm
snd_mpu401_uart 9472 1 snd_via82xx
snd_seq_dummy 4740 0
snd_seq_oss 32896 0
snd_seq_midi 9600 0
snd_rawmidi 25472 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
snd_seq 52592 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 23684 2 snd_pcm,snd_seq
snd_seq_device 9100 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 54020 13 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pcspkr 4224 0
soundcore 8672 1 snd
serio_raw 7940 0
psmouse 38920 0
parport_pc 36388 1
parport 36936 3 ppdev,lp,parport_pc
shpchp 34324 0
pci_hotplug 32576 1 shpchp
via_agp 11264 1
agpgart 35400 2 drm,via_agp
mac80211 175364 3 prism54pci,prism54common,rc80211_simple
cfg80211 22920 1 mac80211
i2c_viapro 10132 0
i2c_core 22656 2 i2c_ec,i2c_viapro
tsdev 8768 0
joydev 10816 0
evdev 11008 5
ext3 133128 2
jbd 59816 1 ext3
mbcache 9604 1 ext3
ide_disk 17024 5
usbhid 26592 0
hid 27392 1 usbhid
via82cxxx 10372 0 [permanent]
generic 5124 0 [permanent]
floppy 59524 0
ata_generic 9092 0
libata 125720 1 ata_generic
scsi_mod 142348 1 libata
ehci_hcd 34188 0
uhci_hcd 25360 0
usbcore 134280 4 usbhid,ehci_hcd,uhci_hcd
fbcon 42656 0
tileblit 3584 1 fbcon
font 9216 1 fbcon
bitblit 6912 1 fbcon
softcursor 3200 1 bitblit
vesafb 9220 0
capability 5896 0
commoncap 8192 1 capability
Et egalement /lib/firmware/2.6.20-16-generic
acx dvb-usb-vp702x-01.fw
aic94xx-seq.fw dvb-usb-vp7045-01.fw
atmel_at76c502_3com.bin dvb-usb-wt220u-01.fw
atmel_at76c502_3com-wpa.bin ipw2100-1.3.fw
atmel_at76c502.bin ipw2100-1.3-i.fw
atmel_at76c502d.bin ipw2100-1.3-p.fw
atmel_at76c502d-wpa.bin ipw2200-bss.fw
atmel_at76c502e.bin ipw2200-ibss.fw
atmel_at76c502e-wpa.bin ipw2200-sniffer.fw
atmel_at76c502-wpa.bin ipw3945.ucode
atmel_at76c503-i3861.bin isl3877
atmel_at76c503-i3863.bin isl3886
atmel_at76c503-rfmd-0.90.2-140.bin isl3887usb_bare
atmel_at76c503-rfmd-acc.bin isl3890
atmel_at76c503-rfmd.bin isl3890usb
atmel_at76c504_2958-wpa.bin iwlwifi-3945.ucode
atmel_at76c504a_2958-wpa.bin ql2100_fw.bin
atmel_at76c504.bin ql2200_fw.bin
atmel_at76c504c-wpa.bin ql2300_fw.bin
atmel_at76c505a-rfmd2958.bin ql2322_fw.bin
atmel_at76c505-rfmd2958.bin ql2400_fw.bin
atmel_at76c505-rfmd.bin rt2561.bin
atmel_at76c506.bin rt2561s.bin
atmel_at76c506-wpa.bin rt2661.bin
dvb-fe-or51132-qam.fw rt73.bin
dvb-fe-or51132-vsb.fw v4l-cx2341x-dec.fw
dvb-fe-or51211.fw v4l-cx2341x-enc.fw
dvb-ttpci-01.fw v4l-cx2341x-init.mpg
dvb-usb-avertv-a800-02.fw v4l-cx25840.fw
dvb-usb-dibusb-5.0.0.11.fw v4l-pvrusb2-24xxx-01.fw
dvb-usb-dibusb-6.0.0.8.fw v4l-pvrusb2-29xxx-01.fw
dvb-usb-dtt200u-01.fw zd1211
dvb-usb-umt-010-02.fw