Dsl pour le "T", faute de frappe...
Beaucoup d’erreurs matériel tout de même.
Du maxtor tout craché... A mon avis cherche pas plus loin, change de disque ça te changera la vie.
1 Raw_Read_Error_Rate 0x000f 118 088 006 Pre-fail Always - 200307382
195 Hardware_ECC_Recovered 0x001a 071 046 000 Old_age Always - 228031697
Surtout ce dernier.
Seagate ça reste lamentable niveau fiabilité dans les premières gammes. Même mon 7200.14 est pas tip top de ce coté là :
# smartctl -a /dev/sdb
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.3.5-300.fc23.x86_64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-1CH164
Serial Number: ........................
LU WWN Device Id: ..................
Firmware Version: CC27
User Capacity: 2 000 398 934 016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Feb 18 21:08:23 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 584) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 214) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 116 095 006 Pre-fail Always - 105884888
3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1398
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 62650457
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4323
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1375
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 363
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 0 0 2
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 072 053 045 Old_age Always - 28 (Min/Max 16/31)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 379
193 Load_Cycle_Count 0x0032 088 088 000 Old_age Always - 25296
194 Temperature_Celsius 0x0022 028 047 000 Old_age Always - 28 (0 7 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 2395h+12m+51.319s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 15949150098
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 17148445831
SMART Error Log Version: 1
ATA Error Count: 363 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 363 occurred at disk power-on lifetime: 4079 hours (169 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 7f 36 7e 00 Error: WP at LBA = 0x007e367f = 8271487
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 10 e8 be 5b 40 00 03:35:22.442 WRITE FPDMA QUEUED
61 00 08 20 08 00 40 00 03:35:22.441 WRITE FPDMA QUEUED
61 00 08 18 47 c3 41 00 03:35:22.441 WRITE FPDMA QUEUED
61 00 e8 30 2f c2 40 00 03:35:22.441 WRITE FPDMA QUEUED
60 00 01 7f 36 7e 40 00 03:35:22.441 READ FPDMA QUEUED
Error 362 occurred at disk power-on lifetime: 4079 hours (169 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 7e 36 7e 00 Error: WP at LBA = 0x007e367e = 8271486
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 98 f0 99 40 00 03:35:18.687 WRITE FPDMA QUEUED
60 00 20 40 15 6c 41 00 03:35:18.686 READ FPDMA QUEUED
61 00 08 c0 be 5b 40 00 03:35:18.686 WRITE FPDMA QUEUED
61 00 10 f0 92 df 40 00 03:35:18.686 WRITE FPDMA QUEUED
60 00 01 7e 36 7e 40 00 03:35:18.686 READ FPDMA QUEUED
Error 361 occurred at disk power-on lifetime: 4079 hours (169 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 7e 36 7e 00 Error: WP at LBA = 0x007e367e = 8271486
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 40 bf 5b 40 00 03:35:14.944 WRITE FPDMA QUEUED
61 00 90 48 cd 5b 40 00 03:35:14.943 WRITE FPDMA QUEUED
61 00 04 93 e2 91 40 00 03:35:14.943 WRITE FPDMA QUEUED
61 00 08 08 26 ec 40 00 03:35:14.943 WRITE FPDMA QUEUED
60 00 01 7e 36 7e 40 00 03:35:14.933 READ FPDMA QUEUED
Error 360 occurred at disk power-on lifetime: 4079 hours (169 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 7e 36 7e 00 Error: UNC at LBA = 0x007e367e = 8271486
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 10 40 04 81 40 00 03:35:11.199 READ FPDMA QUEUED
61 00 08 d8 38 60 40 00 03:35:11.199 WRITE FPDMA QUEUED
61 00 03 08 9a a2 40 00 03:35:11.198 WRITE FPDMA QUEUED
60 00 01 7e 36 7e 40 00 03:35:11.198 READ FPDMA QUEUED
61 00 03 05 9a a2 40 00 03:35:11.198 WRITE FPDMA QUEUED
Error 359 occurred at disk power-on lifetime: 4079 hours (169 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 7d 36 7e 00 Error: UNC at LBA = 0x007e367d = 8271485
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 01 7d 36 7e 40 00 03:35:07.461 READ FPDMA QUEUED
60 00 08 00 b1 54 43 00 03:35:07.439 READ FPDMA QUEUED
61 00 08 d8 43 93 40 00 03:35:07.439 WRITE FPDMA QUEUED
60 00 10 68 c7 19 43 00 03:35:07.438 READ FPDMA QUEUED
61 00 08 18 38 60 40 00 03:35:07.438 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Et cela s'en ressent par moment. Vu à quoi il sert rien de bien grave, mais tout de même.
Comparé à mon WesternDigital Black édition bien qu'un peu plus jeune (mon vieux 500Go Black édition est encore clean malgré les années 5 ou 7 je ne sais plus... ) :
# smartctl -a /dev/sdc
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.3.5-300.fc23.x86_64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Black
Device Model: WDC WD2003FZEX-00Z4SA0
Serial Number: ........................................
LU WWN Device Id: ...........................
Firmware Version: 01.01A01
User Capacity: 2 000 398 934 016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Feb 18 21:09:59 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (21120) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 231) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 165 160 021 Pre-fail Always - 6733
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1304
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2647
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 964
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 224
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1079
194 Temperature_Celsius 0x0022 119 101 000 Old_age Always - 31
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Au passage parfois un simple remplacement de la nappe IDE/câble SATA résout certains problèmes. À essayer en premier à mon avis.