Bonjour,
je viens de récupérer un deuxième écran, et je voudrai maintenant en profiter. Les deux écrans sont VGA (uniquement), ma carte graphique n'a qu'un port VGA. Je me suis orienté vers la carte mère pour gérer le deuxième.
- Ecran 1: carte graphique externe nvidia
- Ecran 2: carte graphique intégrée intel
J'ai commencé par trouver la fonction dans le BIOS. Depuis, Xorg n'utilise toujours que l'écran nvidia, mais l'écran branché sur la carte graphique intégrée me donne accès aux terminaux virtuels.
Pour en profiter sous GNOME, j'ai donc édité xorg.conf
######################################################################################
Section "Screen"
Identifier "Acer_screen"
Device "NvidiaGPU"
Monitor "Acer_monitor"
EndSection
Section "Screen"
Identifier "Sony_screen"
Device "Onboard"
Monitor "Sony_monitor"
EndSection
######################################################################################
Section "Monitor"
Identifier "Acer_monitor"
#Option Primary "True"
EndSection
Section "Monitor"
Identifier "Sony_monitor"
EndSection
######################################################################################
Section "Device"
Identifier "NvidiaGPU"
Driver "nvidia"
BusID "01:00:0"
EndSection
#Intel
Section "Device"
Identifier "Onboard"
Driver "intel"
# Option "AccelMethod" "uxa"
BusID "PCI:00:02:0"
EndSection
######################################################################################
Section "ServerLayout"
Identifier "Dual"
Screen 0 "Acer_screen"
Screen 1 "Sony_screen"
EndSection
Mais ceci n'a rien changé. Le log Xorg.0.log
Version TL;DR
[ 803.655] (II) Loading sub module "dri2"
[ 803.655] (II) LoadModule: "dri2"
[ 803.655] (II) Module "dri2" already built-in
[ 803.655] (EE) intel(G0): [drm] failed to set drm interface version.
[ 803.655] (EE) intel(G0): Failed to become DRM master.
[ 803.655] (II) UnloadModule: "intel"
et version complète
[ 803.260]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 803.260] X Protocol Version 11, Revision 0
[ 803.260] Build Operating System: 3.10.9-200.fc19.x86_64
[ 803.260] Current Operating System: Linux localhost.localdomain 3.11.9-200.fc19.x86_64 #1 SMP Wed Nov 20 21:22:24 UTC 2013 x86_64
[ 803.260] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.9-200.fc19.x86_64 root=UUID=298b2047-e8ed-44ce-ab83-279a9e99413a ro rd.md=0 rd.lvm=0 rd.dm=0 rd.luks=0 rhgb quiet nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off LANG=fr_FR.UTF-8
[ 803.260] Build Date: 13 November 2013 07:28:45AM
[ 803.260] Build ID: xorg-x11-server 1.14.4-3.fc19
[ 803.260] Current version of pixman: 0.30.0
[ 803.260] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 803.260] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 803.260] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 25 23:39:48 2013
[ 803.261] (==) Using config file: "/etc/X11/xorg.conf"
[ 803.261] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 803.261] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 803.261] (==) ServerLayout "Dual"
[ 803.261] (**) |-->Screen "Acer_screen" (0)
[ 803.261] (**) | |-->Monitor "Acer_monitor"
[ 803.261] (**) | |-->Device "NvidiaGPU"
[ 803.261] (**) |-->Screen "Sony_screen" (1)
[ 803.261] (**) | |-->Monitor "Sony_monitor"
[ 803.261] (**) | |-->Device "Onboard"
[ 803.261] (==) Automatically adding devices
[ 803.261] (==) Automatically enabling devices
[ 803.261] (==) Automatically adding GPU devices
[ 803.261] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 803.261] (**) ModulePath set to "/usr/lib64/nvidia/xorg,/usr/lib64/xorg/modules"
[ 803.261] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 803.261] (II) Loader magic: 0x800d00
[ 803.261] (II) Module ABI versions:
[ 803.261] X.Org ANSI C Emulation: 0.4
[ 803.261] X.Org Video Driver: 14.1
[ 803.261] X.Org XInput driver : 19.2
[ 803.261] X.Org Server Extension : 7.0
[ 803.261] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 803.261] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 803.263] (--) PCI: (0:0:2:0) 8086:0102:1458:d000 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/65536
[ 803.263] (--) PCI:*(0:1:0:0) 10de:10c3:1458:34ed rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 803.263] Initializing built-in extension Generic Event Extension
[ 803.263] Initializing built-in extension SHAPE
[ 803.263] Initializing built-in extension MIT-SHM
[ 803.263] Initializing built-in extension XInputExtension
[ 803.263] Initializing built-in extension XTEST
[ 803.263] Initializing built-in extension BIG-REQUESTS
[ 803.263] Initializing built-in extension SYNC
[ 803.263] Initializing built-in extension XKEYBOARD
[ 803.263] Initializing built-in extension XC-MISC
[ 803.263] Initializing built-in extension XINERAMA
[ 803.263] Initializing built-in extension XFIXES
[ 803.263] Initializing built-in extension RENDER
[ 803.263] Initializing built-in extension RANDR
[ 803.263] Initializing built-in extension COMPOSITE
[ 803.263] Initializing built-in extension DAMAGE
[ 803.263] Initializing built-in extension MIT-SCREEN-SAVER
[ 803.263] Initializing built-in extension DOUBLE-BUFFER
[ 803.263] Initializing built-in extension RECORD
[ 803.263] Initializing built-in extension DPMS
[ 803.263] Initializing built-in extension X-Resource
[ 803.263] Initializing built-in extension XVideo
[ 803.263] Initializing built-in extension XVideo-MotionCompensation
[ 803.263] Initializing built-in extension SELinux
[ 803.263] Initializing built-in extension XFree86-VidModeExtension
[ 803.263] Initializing built-in extension XFree86-DGA
[ 803.263] Initializing built-in extension XFree86-DRI
[ 803.263] Initializing built-in extension DRI2
[ 803.263] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 803.263] (II) "glx" will be loaded by default.
[ 803.263] (II) LoadModule: "glx"
[ 803.263] (II) Loading /usr/lib64/nvidia/xorg/libglx.so
[ 803.265] (II) Module glx: vendor="NVIDIA Corporation"
[ 803.265] compiled for 4.0.2, module version = 1.0.0
[ 803.265] Module class: X.Org Server Extension
[ 803.265] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
[ 803.265] Loading extension GLX
[ 803.265] (II) LoadModule: "nvidia"
[ 803.266] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 803.266] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 803.266] compiled for 4.0.2, module version = 1.0.0
[ 803.266] Module class: X.Org Video Driver
[ 803.266] (II) LoadModule: "intel"
[ 803.266] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 803.266] (II) Module intel: vendor="X.Org Foundation"
[ 803.266] compiled for 1.14.2, module version = 2.21.12
[ 803.266] Module class: X.Org Video Driver
[ 803.266] ABI class: X.Org Video Driver, version 14.1
[ 803.266] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
[ 803.266] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 803.266] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 803.268] (++) using VT number 1
[ 803.268] (II) Loading sub module "fb"
[ 803.268] (II) LoadModule: "fb"
[ 803.268] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 803.268] (II) Module fb: vendor="X.Org Foundation"
[ 803.268] compiled for 1.14.4, module version = 1.0.0
[ 803.268] ABI class: X.Org ANSI C Emulation, version 0.4
[ 803.268] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 803.268] (II) Loading sub module "wfb"
[ 803.268] (II) LoadModule: "wfb"
[ 803.268] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 803.268] (II) Module wfb: vendor="X.Org Foundation"
[ 803.268] compiled for 1.14.4, module version = 1.0.0
[ 803.268] ABI class: X.Org ANSI C Emulation, version 0.4
[ 803.268] (II) Loading sub module "ramdac"
[ 803.268] (II) LoadModule: "ramdac"
[ 803.268] (II) Module "ramdac" already built-in
[ 803.269] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Acer_screen" for depth/fbbpp 24/32
[ 803.269] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 803.269] (==) NVIDIA(0): RGB weight 888
[ 803.269] (==) NVIDIA(0): Default visual is TrueColor
[ 803.269] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 803.269] (**) NVIDIA(0): Enabling 2D acceleration
[ 803.596] (II) NVIDIA(0): Display (Acer AL1716 (CRT-1)) does not support NVIDIA 3D
[ 803.596] (II) NVIDIA(0): Vision stereo.
[ 803.596] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 803.597] (II) NVIDIA(0): NVIDIA GPU GeForce 8400GS (GT218) at PCI:1:0:0 (GPU-0)
[ 803.597] (--) NVIDIA(0): Memory: 131072 kBytes
[ 803.597] (--) NVIDIA(0): VideoBIOS: 70.18.4f.00.0f
[ 803.597] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 803.599] (--) NVIDIA(0): Valid display device(s) on GeForce 8400GS at PCI:1:0:0
[ 803.599] (--) NVIDIA(0): CRT-0
[ 803.599] (--) NVIDIA(0): Acer AL1716 (CRT-1) (boot, connected)
[ 803.599] (--) NVIDIA(0): DFP-0
[ 803.599] (--) NVIDIA(0): DFP-1
[ 803.599] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 803.599] (--) NVIDIA(0): Acer AL1716 (CRT-1): 400.0 MHz maximum pixel clock
[ 803.599] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 803.599] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 803.599] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 803.599] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 803.599] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 803.599] (**) NVIDIA(0): device Acer AL1716 (CRT-1) (Using EDID frequencies has
[ 803.599] (**) NVIDIA(0): been enabled on all display devices.)
[ 803.602] (==) NVIDIA(0):
[ 803.602] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 803.602] (==) NVIDIA(0): will be used as the requested mode.
[ 803.602] (==) NVIDIA(0):
[ 803.602] (II) NVIDIA(0): Validated MetaModes:
[ 803.602] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 803.602] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 803.627] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 803.627] (--) NVIDIA(0): option
[ 803.627] (II) intel(1): Creating default Display subsection in Screen section
"Sony_screen" for depth/fbbpp 24/32
[ 803.627] (==) intel(1): Depth 24, (--) framebuffer bpp 32
[ 803.627] (==) intel(1): RGB weight 888
[ 803.627] (==) intel(1): Default visual is TrueColor
[ 803.627] (--) intel(1): Integrated Graphics Chipset: Intel(R) Sandybridge Desktop (GT1)
[ 803.627] (**) intel(1): Relaxed fencing enabled
[ 803.627] (**) intel(1): Wait on SwapBuffers? enabled
[ 803.627] (**) intel(1): Triple buffering? enabled
[ 803.627] (**) intel(1): Framebuffer tiled
[ 803.627] (**) intel(1): Pixmaps tiled
[ 803.627] (**) intel(1): 3D buffers tiled
[ 803.627] (**) intel(1): SwapBuffers wait enabled
[ 803.627] (==) intel(1): video overlay key set to 0x101fe
[ 803.640] (II) intel(1): Output VGA1 using monitor section Sony_monitor
[ 803.640] (II) intel(1): Output HDMI1 has no monitor section
[ 803.640] (II) intel(1): Output DP1 has no monitor section
[ 803.641] (II) intel(1): Output HDMI2 has no monitor section
[ 803.641] (II) intel(1): Output DP2 has no monitor section
[ 803.653] (II) intel(1): EDID for output VGA1
[ 803.653] (II) intel(1): Manufacturer: SNY Model: 2250 Serial#: 16843009
[ 803.653] (II) intel(1): Year: 2003 Week: 12
[ 803.653] (II) intel(1): EDID Version: 1.3
[ 803.653] (II) intel(1): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 803.653] (II) intel(1): Sync: Separate Composite
[ 803.653] (II) intel(1): Max Image Size [cm]: horiz.: 30 vert.: 23
[ 803.654] (II) intel(1): Gamma: 2.20
[ 803.654] (II) intel(1): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 803.654] (II) intel(1): First detailed timing is preferred mode
[ 803.654] (II) intel(1): redX: 0.631 redY: 0.347 greenX: 0.309 greenY: 0.583
[ 803.654] (II) intel(1): blueX: 0.149 blueY: 0.113 whiteX: 0.283 whiteY: 0.298
[ 803.654] (II) intel(1): Supported established timings:
[ 803.654] (II) intel(1): 720x400@70Hz
[ 803.654] (II) intel(1): 640x480@60Hz
[ 803.654] (II) intel(1): 800x600@60Hz
[ 803.654] (II) intel(1): 1024x768@60Hz
[ 803.654] (II) intel(1): Manufacturer's mask: 0
[ 803.654] (II) intel(1): Supported detailed timing:
[ 803.654] (II) intel(1): clock: 65.0 MHz Image Size: 304 x 228 mm
[ 803.654] (II) intel(1): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 803.654] (II) intel(1): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
[ 803.654] (II) intel(1): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 52 kHz, PixClock max 95 MHz
[ 803.654] (II) intel(1): Monitor name: SDM-HS53
[ 803.654] (II) intel(1): Serial No: 3364633
[ 803.654] (II) intel(1): EDID (in hex):
[ 803.654] (II) intel(1): 00ffffffffffff004dd9502201010101
[ 803.654] (II) intel(1): 0c0d01030c1e1778eab149a1584f9526
[ 803.654] (II) intel(1): 1d484ca1080001010101010101010101
[ 803.654] (II) intel(1): 01010101010164190040410026301888
[ 803.654] (II) intel(1): 360030e410000018000000fd00393f1c
[ 803.654] (II) intel(1): 3409000a202020202020000000fc0053
[ 803.654] (II) intel(1): 444d2d485335330a20202020000000ff
[ 803.654] (II) intel(1): 00333336343633330a20202020200096
[ 803.654] (II) intel(1): Printing probed modes for output VGA1
[ 803.654] (II) intel(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 803.654] (II) intel(1): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 803.654] (II) intel(1): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 803.654] (II) intel(1): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 803.654] (II) intel(1): EDID for output HDMI1
[ 803.654] (II) intel(1): EDID for output DP1
[ 803.655] (II) intel(1): EDID for output HDMI2
[ 803.655] (II) intel(1): EDID for output DP2
[ 803.655] (II) intel(1): Output VGA1 connected
[ 803.655] (II) intel(1): Output HDMI1 disconnected
[ 803.655] (II) intel(1): Output DP1 disconnected
[ 803.655] (II) intel(1): Output HDMI2 disconnected
[ 803.655] (II) intel(1): Output DP2 disconnected
[ 803.655] (II) intel(1): Using exact sizes for initial modes
[ 803.655] (II) intel(1): Output VGA1 using initial mode 1024x768 +0+0
[ 803.655] (II) intel(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 803.655] (II) intel(1): Kernel page flipping support detected, enabling
[ 803.655] (==) intel(1): DPI set to (96, 96)
[ 803.655] (II) Loading sub module "fb"
[ 803.655] (II) LoadModule: "fb"
[ 803.655] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 803.655] (II) Module fb: vendor="X.Org Foundation"
[ 803.655] compiled for 1.14.4, module version = 1.0.0
[ 803.655] ABI class: X.Org ANSI C Emulation, version 0.4
[ 803.655] (II) Loading sub module "dri2"
[ 803.655] (II) LoadModule: "dri2"
[ 803.655] (II) Module "dri2" already built-in
[ 803.655] (EE) intel(G0): [drm] failed to set drm interface version.
[ 803.655] (EE) intel(G0): Failed to become DRM master.
[ 803.655] (II) UnloadModule: "intel"
[ 803.655] (--) Depth 24 pixmap format is 32 bpp
[ 803.655] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 803.659] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 803.659] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 803.659] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 803.659] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 803.659] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 803.659] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 803.659] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 803.659] (II) NVIDIA(0): Config Options in the README.
[ 803.662] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 803.707] Loading extension NV-GLX
[ 803.720] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 803.720] (==) NVIDIA(0): Backing store disabled
[ 803.720] (==) NVIDIA(0): Silken mouse enabled
[ 803.721] (==) NVIDIA(0): DPMS enabled
[ 803.721] Loading extension NV-CONTROL
[ 803.721] (II) Loading sub module "dri2"
[ 803.721] (II) LoadModule: "dri2"
[ 803.721] (II) Module "dri2" already built-in
[ 803.721] (II) NVIDIA(0): [DRI2] Setup complete
[ 803.721] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 803.721] (--) RandR disabled
[ 803.721] (II) intel(1): [DRI2] Setup complete
[ 803.721] (II) intel(1): [DRI2] DRI driver: i965
[ 803.721] (II) intel(1): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 803.722] (II) UXA(1): Driver registered support for the following operations:
[ 803.722] (II) solid
[ 803.722] (II) copy
[ 803.722] (II) composite (RENDER acceleration)
[ 803.722] (II) put_image
[ 803.722] (II) get_image
[ 803.722] (==) intel(1): Backing store disabled
[ 803.722] (==) intel(1): Silken mouse enabled
[ 803.722] (II) intel(1): Initializing HW Cursor
[ 803.722] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 803.722] (==) intel(1): DPMS enabled
[ 803.722] (==) intel(1): Intel XvMC decoder enabled
[ 803.722] (II) intel(1): Set up textured video
[ 803.722] (II) intel(1): [XvMC] xvmc_vld driver initialized.
[ 803.722] (II) intel(1): direct rendering: DRI2 Enabled
[ 803.722] (==) intel(1): hotplug detection: "enabled"
[ 803.739] (--) RandR disabled
[ 803.742] (II) SELinux: Disabled on system
[ 803.742] (II) Initializing extension GLX
[ 803.743] (II) intel(1): Setting screen physical size to 270 x 203
[ 803.772] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 803.772] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 803.772] (**) Power Button: Applying InputClass "anaconda-keyboard"
[ 803.772] (II) LoadModule: "evdev"
[ 803.772] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 803.772] (II) Module evdev: vendor="X.Org Foundation"
[ 803.772] compiled for 1.14.2, module version = 2.8.1
[ 803.772] Module class: X.Org XInput Driver
[ 803.772] ABI class: X.Org XInput driver, version 19.1
[ 803.772] (II) Using input driver 'evdev' for 'Power Button'
[ 803.772] (**) Power Button: always reports core events
[ 803.772] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 803.772] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 803.772] (--) evdev: Power Button: Found keys
[ 803.772] (II) evdev: Power Button: Configuring as keyboard
[ 803.772] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 803.772] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 803.772] (**) Option "xkb_rules" "evdev"
[ 803.772] (**) Option "xkb_model" "pc104"
[ 803.772] (**) Option "xkb_layout" "fr,us"
[ 803.772] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 803.793] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 803.793] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 803.793] (**) Video Bus: Applying InputClass "anaconda-keyboard"
[ 803.793] (II) Using input driver 'evdev' for 'Video Bus'
[ 803.793] (**) Video Bus: always reports core events
[ 803.793] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 803.793] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 803.793] (--) evdev: Video Bus: Found keys
[ 803.793] (II) evdev: Video Bus: Configuring as keyboard
[ 803.793] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 803.793] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 803.793] (**) Option "xkb_rules" "evdev"
[ 803.793] (**) Option "xkb_model" "pc104"
[ 803.793] (**) Option "xkb_layout" "fr,us"
[ 803.793] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 803.794] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 803.794] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 803.794] (**) Power Button: Applying InputClass "anaconda-keyboard"
[ 803.794] (II) Using input driver 'evdev' for 'Power Button'
[ 803.794] (**) Power Button: always reports core events
[ 803.794] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 803.794] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 803.794] (--) evdev: Power Button: Found keys
[ 803.794] (II) evdev: Power Button: Configuring as keyboard
[ 803.794] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 803.794] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 803.794] (**) Option "xkb_rules" "evdev"
[ 803.794] (**) Option "xkb_model" "pc104"
[ 803.794] (**) Option "xkb_layout" "fr,us"
[ 803.794] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 803.794] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 803.794] (II) config/udev: Adding input device UVC Camera (046d:081b) (/dev/input/event5)
[ 803.794] (**) UVC Camera (046d:081b): Applying InputClass "evdev keyboard catchall"
[ 803.794] (**) UVC Camera (046d:081b): Applying InputClass "anaconda-keyboard"
[ 803.794] (II) Using input driver 'evdev' for 'UVC Camera (046d:081b)'
[ 803.794] (**) UVC Camera (046d:081b): always reports core events
[ 803.794] (**) evdev: UVC Camera (046d:081b): Device: "/dev/input/event5"
[ 803.794] (--) evdev: UVC Camera (046d:081b): Vendor 0x46d Product 0x81b
[ 803.794] (--) evdev: UVC Camera (046d:081b): Found keys
[ 803.794] (II) evdev: UVC Camera (046d:081b): Configuring as keyboard
[ 803.794] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input5/event5"
[ 803.794] (II) XINPUT: Adding extended input device "UVC Camera (046d:081b)" (type: KEYBOARD, id 9)
[ 803.794] (**) Option "xkb_rules" "evdev"
[ 803.794] (**) Option "xkb_model" "pc104"
[ 803.794] (**) Option "xkb_layout" "fr,us"
[ 803.794] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 803.795] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 803.795] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 803.795] (**) Logitech USB Receiver: Applying InputClass "anaconda-keyboard"
[ 803.795] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 803.795] (**) Logitech USB Receiver: always reports core events
[ 803.795] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 803.795] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 803.795] (--) evdev: Logitech USB Receiver: Found keys
[ 803.795] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 803.795] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input3/event3"
[ 803.795] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 803.795] (**) Option "xkb_rules" "evdev"
[ 803.795] (**) Option "xkb_model" "pc104"
[ 803.795] (**) Option "xkb_layout" "fr,us"
[ 803.795] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 803.795] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 803.795] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 803.795] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 803.795] (**) Logitech USB Receiver: Applying InputClass "anaconda-keyboard"
[ 803.795] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 803.795] (**) Logitech USB Receiver: always reports core events
[ 803.795] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[ 803.795] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 803.795] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 803.795] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 803.795] (--) evdev: Logitech USB Receiver: Found relative axes
[ 803.795] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 803.795] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 803.795] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 803.795] (--) evdev: Logitech USB Receiver: Found keys
[ 803.795] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 803.795] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 803.795] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 803.795] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 803.795] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 803.795] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input4/event4"
[ 803.795] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 803.795] (**) Option "xkb_rules" "evdev"
[ 803.796] (**) Option "xkb_model" "pc104"
[ 803.796] (**) Option "xkb_layout" "fr,us"
[ 803.796] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ 803.796] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 803.796] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 803.796] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 803.796] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 803.796] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 803.796] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 803.796] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 803.796] (**) Logitech USB Receiver: Applying InputClass "anaconda-keyboard"
[ 803.796] (II) No input driver specified, ignoring this device.
[ 803.796] (II) This device may have been added with another device file.
[ 803.796] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
[ 803.796] (II) No input driver specified, ignoring this device.
[ 803.796] (II) This device may have been added with another device file.
[ 803.796] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event11)
[ 803.796] (II) No input driver specified, ignoring this device.
[ 803.796] (II) This device may have been added with another device file.
[ 803.796] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event6)
[ 803.796] (II) No input driver specified, ignoring this device.
[ 803.796] (II) This device may have been added with another device file.
[ 803.797] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
[ 803.797] (II) No input driver specified, ignoring this device.
[ 803.797] (II) This device may have been added with another device file.
[ 803.797] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
[ 803.797] (II) No input driver specified, ignoring this device.
[ 803.797] (II) This device may have been added with another device file.
[ 803.797] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[ 803.797] (II) No input driver specified, ignoring this device.
[ 803.797] (II) This device may have been added with another device file.
[ 803.797] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 803.797] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[ 803.797] (II) No input driver specified, ignoring this device.
[ 803.797] (II) This device may have been added with another device file.
[ 803.797] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[ 803.797] (II) No input driver specified, ignoring this device.
[ 803.797] (II) This device may have been added with another device file.
[ 803.797] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[ 803.797] (II) No input driver specified, ignoring this device.
[ 803.797] (II) This device may have been added with another device file.
[ 803.797] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 803.797] (II) No input driver specified, ignoring this device.
[ 803.797] (II) This device may have been added with another device file.
[ 804.027] (II) NVIDIA(GPU-0): Display (Acer AL1716 (CRT-1)) does not support NVIDIA 3D
[ 804.027] (II) NVIDIA(GPU-0): Vision stereo.
[ 804.325] (II) NVIDIA(GPU-0): Display (Acer AL1716 (CRT-1)) does not support NVIDIA 3D
[ 804.325] (II) NVIDIA(GPU-0): Vision stereo.
[ 804.703] (II) NVIDIA(GPU-0): Display (Acer AL1716 (CRT-1)) does not support NVIDIA 3D
[ 804.703] (II) NVIDIA(GPU-0): Vision stereo.
[ 809.511] (II) NVIDIA(GPU-0): Display (Acer AL1716 (CRT-1)) does not support NVIDIA 3D
[ 809.511] (II) NVIDIA(GPU-0): Vision stereo.
[ 809.590] (II) intel(1): EDID vendor "SNY", prod id 8784
[ 809.590] (II) intel(1): Using EDID range info for horizontal sync
[ 809.590] (II) intel(1): Using EDID range info for vertical refresh
[ 809.590] (II) intel(1): Printing DDC gathered Modelines:
[ 809.590] (II) intel(1): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 809.590] (II) intel(1): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 809.590] (II) intel(1): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 809.590] (II) intel(1): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 809.768] (II) NVIDIA(GPU-0): Display (Acer AL1716 (CRT-1)) does not support NVIDIA 3D
[ 809.768] (II) NVIDIA(GPU-0): Vision stereo.
[ 810.014] (II) NVIDIA(GPU-0): Display (Acer AL1716 (CRT-1)) does not support NVIDIA 3D
[ 810.014] (II) NVIDIA(GPU-0): Vision stereo.
[ 831.609] (II) NVIDIA(GPU-0): Display (Acer AL1716 (CRT-1)) does not support NVIDIA 3D
[ 831.609] (II) NVIDIA(GPU-0): Vision stereo.
xrandr si utile.
$ xrandr
Screen 0: minimum 8 x 8, current 1280 x 1024, maximum 8192 x 8192
DVI-I-0 disconnected (normal left inverted right x axis y axis)
VGA-0 connected primary 1280x1024+0+0 (normal left inverted right x axis y axis) 340mm x 270mm
1280x1024 60.0*+ 75.0
1024x768 75.0 70.1 60.0
800x600 75.0 60.3
640x480 75.0 59.9
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
$ uname -r
3.11.9-200.fc19.x86_64
Une boulette dans ma config? Ou faut-il me résoudre à acheter un adaptateur VGA vers HDMI?