salut
voila le résultat de sensors (j'ai déjà fait un sensor_detect et redémarrer)
[antoine@Orwell ~]$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +47.0°C (crit = +110.0°C)
temp2: +38.0°C (crit = +256.0°C)
temp3: +48.0°C (crit = +107.0°C)
temp4: +50.0°C (crit = +105.0°C)
temp5: +26.7°C (crit = +107.0°C)
temp6: +50.0°C (crit = +110.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +47.0°C (high = +100.0°C, crit = +100.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +48.0°C (high = +100.0°C, crit = +100.0°C)
pas d'info sur le gpu mais selon moi c'est temp6 qui pilote surtout le ventilo
de mémoire le ventilo s’arrête en dessous de 50°C
sous ubuntu, sa valeur change par a coup (0, 20 , 50 ou 60)
sous fedora je le vois toujours a 50 ou 60
d'autre infos
[root@Orwell ~]# sensors-detect
# sensors-detect revision 5946 (2011-03-23 11:54:44 +0100)
# System: Hewlett-Packard HP Compaq 6830s (laptop)
# Board: Hewlett-Packard 30E9
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): YES
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... Yes
Found unknown chip with ID 0x4501
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): YES
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): YES
Sorry, no supported PCI bus adapters found.
Module i2c-dev loaded successfully.
Next adapter: Radeon i2c bit bus 0x90 (i2c-0)
Do you want to scan it? (YES/no/selectively): YES
Next adapter: Radeon i2c bit bus 0x91 (i2c-1)
Do you want to scan it? (YES/no/selectively): YES
Next adapter: Radeon i2c bit bus 0x92 (i2c-2)
Do you want to scan it? (YES/no/selectively): YES
Next adapter: Radeon i2c bit bus 0x93 (i2c-3)
Do you want to scan it? (YES/no/selectively): YES
Next adapter: Radeon i2c bit bus 0x14 (i2c-4)
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x4f
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `Texas Instruments TMP421'... No
Probing for `Texas Instruments TMP422'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): YES
Unloading i2c-dev... OK
[root@Orwell ~]# cat /etc/sysconfig/lm_sensors
# Generated by sensors-detect on Tue May 31 19:41:15 2011
# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
# The format of this file is a shell script that simply defines variables:
# HWMON_MODULES for hardware monitoring driver modules, and optionally
# BUS_MODULES for any required bus driver module (for example for I2C or SPI).
HWMON_MODULES="coretemp"
# For compatibility reasons, modules are also listed individually as variables
# MODULE_0, MODULE_1, MODULE_2, etc.
# You should use BUS_MODULES and HWMON_MODULES instead if possible.
MODULE_0=coretemp
