Bonsoir tout le monde,

Ma carte WIFI à disparue.
ifconfig ne la montre plus, me montre :
02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection


et dmesg :
[ 12.355499] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 12.355502] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 12.355690] iwlagn 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54

Si quelqu'un à une idée de comment récupéré ma carte, je suis preneur !

Merci d'avance.
Est-ce que par hasard un bouton n'aurait pas malencontreusement éteint matériellement ta carte wifi ?
Non non.
Je cherche desesperement une solution !
7 jours plus tard
Je pète un câble (suite à mon problème de réseau sans fil 🙁) !

Je n'ai pas trouvé la solution, j'ai réinstallé (super...).

ça remarche deux ou trois jours, puis hop, ça ne remarche plus, la carte à disparue. C'est énervant... Je pense que c'est NetworkManager suite à l'insertion d'une 3G. 
Dec  6 23:05:09 this NetworkManager[1298]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Dec  6 23:05:09 this NetworkManager[1298]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlagn' ifindex: 3)
Dec  6 23:05:09 this NetworkManager[1298]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Dec  6 23:05:09 this NetworkManager[1298]: <info> (wlan0): now managed
Dec  6 23:05:09 this NetworkManager[1298]: <info> (wlan0): device state change: 1 -> 2 (reason 2)
Dec  6 23:05:09 this NetworkManager[1298]: <info> (wlan0): bringing up device.
Dec  6 23:05:09 this NetworkManager[1298]: <info> (wlan0): deactivating device (reason: 2).
Dec  6 23:05:09 this NetworkManager[1298]: <info> (wlan0): supplicant manager state:  down -> idle
ça c'est que j'ai dans grep wlan0 /var/log/message

Ou sont les fichiers de conf de NetworkManager ? Rien ne parle de mes interfaces dans les fichiers que j'ai trouvé...
Si ça passe pas. rapporte un bug sur le bugzilla
oliwohlgi wrote:Voici ce que j'ai trouvé sur un forum :

Just updated networkmanager to version 0.8.2-5 and ...
pingou wrote:Si ça passe pas. rapporte un bug sur le bugzilla ...
Merci de vos messages.

Je ne pense pas que ce soit la version de NM, il n'y a pas eu de changement entre le moment ou ça fonctionnait et le reboot, ou ma carte à disparue. Je pense que c'est le moment ou j'ai pluggé ma clef 3G.

Le seul moyen que j'ai trouvé pour contourner cela :

Désinstaller NM
Recréer toutes mes interfaces (en desinstallant NM, mes interfaces ont sauté)
Recréer les fichiers ifup
et roule ma loutre :-P


M'enfin, un bon GROS moment de stress et de galère (lors de mon précédent poste, j'étais en intervention chez le client...)

Je vais retester ça plutard mais je n'ai vraiment pas fait de manip tordue, je ne vois pas pourquoi ça a fait cela. Si j'arrive à reproduire le problème "proprement", j'ouvrirais un bug, la en l'état, ça ferait trop brouillon comme bug.
3 mois plus tard
J'ai eu le même problème depuis le 2 Mars 2011 avec la MAJ de Network Manager après reconnection de la session plus de carte....

lspci ne montre plus ma carte wifi ( laptop )

J'ai loader les kernels antérieur sans succès donc j'attends une MAJ de NM ou du Kernel.... sinon l'ethernet fonctionne toujours.

Je viens de voir que Vmplayer peut utiliser ma carte wifi RALINK.

Donc peut-être que le problème vient de là mais je me souviens que je n'ai pas rencontrer de problème de Wifi durant l'utilisation de Vmplayer..... 
#dmesg 
ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mon Bios est un Phoenix TrustedCore et chez PackardBell mon model n'est plus référencer donc pas de driver à mettre à jour.
LOOPING wrote:J'ai eu le même problème depuis le 2 Mars 2011 avec la MAJ de Network Manager après reconnection de la session plus de carte....

lspci ne montre plus ma carte wifi ( laptop )

J'ai loader les kernels antérieur sans succès donc j'attends une MAJ de NM ou du Kernel.... sinon l'ethernet fonctionne toujours.
Je ne vois pas comment NetworkManager pourrait faire disparaitre une carte au niveau de la commande lspci...

La commande lspci retourne l'indentifiant pci de tous les périphériques connectés même les plus exotiques pour lesquels aucun pilote n'est disponible....
didierg wrote:Je ne vois pas comment NetworkManager pourrait faire disparaitre une carte au niveau de la commande lspci...

La commande lspci retourne l'indentifiant pci de tous les périphériques connectés même les plus exotiques pour lesquels aucun pilote n'est disponible....
De toute façon le problème reste le même la RALINK a disparu..... 🙁
# lspci -v
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, fast devsel, latency 0
    Capabilities: [e0] Vendor Specific Information: Len=0a <?>

00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: cc000000-ceffffff
    Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
    Capabilities: [88] Subsystem: Packard Bell B.V. Device c103
    Capabilities: [80] Power Management version 3
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [a0] Express Root Port (Slot+), MSI 00
    Capabilities: [100] Virtual Channel
    Capabilities: [140] Root Complex Link
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 04) (prog-if 00 [UHCI])
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, medium devsel, latency 0, IRQ 16
    I/O ports at 1800 [size=32]
    Kernel driver in use: uhci_hcd

00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 04) (prog-if 00 [UHCI])
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, medium devsel, latency 0, IRQ 21
    I/O ports at 1820 [size=32]
    Kernel driver in use: uhci_hcd

00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 04) (prog-if 20 [EHCI])
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, medium devsel, latency 0, IRQ 18
    Memory at f4404800 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 04)
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, fast devsel, latency 0, IRQ 46
    Memory at f4400000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
    Capabilities: [100] Virtual Channel
    Capabilities: [130] Root Complex Link
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
    I/O behind bridge: 00005000-00005fff
    Memory behind bridge: c0000000-c01fffff
    Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [90] Subsystem: Packard Bell B.V. Device c103
    Capabilities: [a0] Power Management version 2
    Capabilities: [100] Virtual Channel
    Capabilities: [180] Root Complex Link
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 04) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
    I/O behind bridge: 00003000-00003fff
    Memory behind bridge: f2000000-f3ffffff
    Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [90] Subsystem: Packard Bell B.V. Device c103
    Capabilities: [a0] Power Management version 2
    Capabilities: [100] Virtual Channel
    Capabilities: [180] Root Complex Link
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 04) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
    I/O behind bridge: 00004000-00004fff
    Memory behind bridge: f4000000-f40fffff
    Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [90] Subsystem: Packard Bell B.V. Device c103
    Capabilities: [a0] Power Management version 2
    Capabilities: [100] Virtual Channel
    Capabilities: [180] Root Complex Link
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 04) (prog-if 00 [UHCI])
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, medium devsel, latency 0, IRQ 23
    I/O ports at 1840 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 04) (prog-if 00 [UHCI])
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, medium devsel, latency 0, IRQ 19
    I/O ports at 1860 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 04) (prog-if 00 [UHCI])
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, medium devsel, latency 0, IRQ 18
    I/O ports at 1880 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 04) (prog-if 20 [EHCI])
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, medium devsel, latency 0, IRQ 23
    Memory at f4404c00 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f4) (prog-if 01 [Subtractive decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
    Memory behind bridge: f4100000-f41fffff
    Capabilities: [50] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000

00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 04)
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, medium devsel, latency 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel modules: iTCO_wdt

00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP])
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, medium devsel, latency 0, IRQ 19
    I/O ports at 01f0 [size=8]
    I/O ports at 03f4 [size=1]
    I/O ports at 0170 [size=8]
    I/O ports at 0374 [size=1]
    I/O ports at 18a0 [size=16]
    Kernel driver in use: ata_piix
    Kernel modules: ata_generic, pata_acpi

00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 44
    I/O ports at 18d8 [size=8]
    I/O ports at 18cc [size=4]
    I/O ports at 18d0 [size=8]
    I/O ports at 18c8 [size=4]
    I/O ports at 18e0 [size=32]
    Memory at f4404000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: [80] MSI: Enable+ Count=1/4 Maskable- 64bit-
    Capabilities: [70] Power Management version 3
    Capabilities: [a8] SATA HBA v1.0
    Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 04)
    Subsystem: Packard Bell B.V. Device c103
    Flags: medium devsel, IRQ 19
    Memory at c0600000 (32-bit, non-prefetchable) [size=256]
    I/O ports at 1c00 [size=32]
    Kernel modules: i2c-i801

01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M G] (rev a1) (prog-if 00 [VGA controller])
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
    Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
    I/O ports at 2000 [size=128]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [60] Power Management version 2
    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [78] Express Endpoint, MSI 00
    Capabilities: [100] Virtual Channel
    Capabilities: [128] Power Budgeting <?>
    Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
    Kernel driver in use: nouveau
    Kernel modules: nouveau, nvidiafb

06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller (rev 14)
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, fast devsel, latency 0, IRQ 45
    Memory at f4000000 (64-bit, non-prefetchable) [size=16K]
    I/O ports at 4000 [size=256]
    Capabilities: [48] Power Management version 2
    Capabilities: [50] Vital Product Data
    Capabilities: [5c] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Capabilities: [e0] Express Legacy Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Kernel driver in use: sky2
    Kernel modules: sky2

07:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (prog-if 10 [OHCI])
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, medium devsel, latency 32, IRQ 16
    Memory at f4100000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: [dc] Power Management version 2
    Kernel driver in use: firewire_ohci
    Kernel modules: firewire-ohci

07:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
    Subsystem: Packard Bell B.V. Device c103
    Flags: bus master, medium devsel, latency 32, IRQ 17
    Memory at f4100800 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2
    Kernel driver in use: sdhci-pci
    Kernel modules: sdhci-pci

07:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
    Subsystem: Packard Bell B.V. Device c103
    Flags: medium devsel, IRQ 11
    Memory at f4101000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2


Sur le site de fedoraunity.org j'ai cherché une explication mais je n'ai pas trouvé ma réponse
ya pas un bouton rfkill? un switch matériel qui désactiverait la carte wifi. Car je ne vois pas non plus comment un logiciel comme network manager pourrait supprimer un materiel. Poste nous le résultat de la commande "dmesg".
madko wrote:ya pas un bouton rfkill? un switch matériel qui désactiverait la carte wifi. Car je ne vois pas non plus comment un logiciel comme network manager pourrait supprimer un materiel. Poste nous le résultat de la commande "dmesg".
Le bouton matériel is ON 
# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35.10-74.fc14.x86_64 (mockbuild@x86-11.phx2.fedoraproject.org) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Thu Dec 23 16:04:50 UTC 2010
[    0.000000] Command line: ro root=/dev/mapper/vg_fc14-lv_root rd_LVM_LV=vg_fc14/lv_root rd_LVM_LV=vg_fc14/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=fr_FR.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=fr-latin9 rhgb quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable)
[    0.000000]  BIOS-e820: 00000000bf6d0000 - 00000000bf6e3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf6e3000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   1 base 000000000 mask F00000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 base 0BF700000 mask FFFF00000 uncachable
[    0.000000]   4 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 3GB, range: 1GB, type UC
[    0.000000] reg 1, base: 0GB, range: 4GB, type WB
[    0.000000] reg 2, base: 4GB, range: 1GB, type WB
[    0.000000] reg 3, base: 3063MB, range: 1MB, type UC
[    0.000000] reg 4, base: 3064MB, range: 8MB, type UC
[    0.000000] total RAM covered: 4087M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K     chunk_size: 16M     num_reg: 5      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3063MB, range: 1MB, type UC
[    0.000000] reg 3, base: 3064MB, range: 8MB, type UC
[    0.000000] reg 4, base: 4GB, range: 1GB, type WB
[    0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbf6d0 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] found SMP MP-table at [ffff8800000f7e40] f7e40
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf6d0000
[    0.000000]  0000000000 - 00bf600000 page 2M
[    0.000000]  00bf600000 - 00bf6d0000 page 4k
[    0.000000] kernel direct mapping tables up to bf6d0000 @ 16000-1b000
[    0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[    0.000000]  0100000000 - 0140000000 page 2M
[    0.000000] kernel direct mapping tables up to 140000000 @ 19000-1f000
[    0.000000] RAMDISK: 37376000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000f7e10 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 00000000bf6da7de 0008C (v01 PacBel PBNB0001 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 00000000bf6e1bd2 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT 00000000bf6dbd05 05E59 (v02 INTEL  CRESTLNE 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 00000000bf6e2fc0 00040
[    0.000000] ACPI: APIC 00000000bf6e1cc6 00068 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: HPET 00000000bf6e1d2e 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 00000000bf6e1d66 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: TCPA 00000000bf6e1da2 00032 (v01 Intel   CRESTLN 06040000      00005A52)
[    0.000000] ACPI: TMOR 00000000bf6e1dd4 00026 (v01 PTLTD           06040000 PTL  00000003)
[    0.000000] ACPI: APIC 00000000bf6e1dfa 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000bf6e1e62 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 00000000bf6e1e8a 00176 (v01 PacBel PBNB0001 06040000  LTP 00000000)
[    0.000000] ACPI: SSDT 00000000bf6dba28 002DD (v01 SataRe SataAhci 00001000 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000bf6dadf6 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000bf6dad50 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 00000000bf6da86a 004E6 (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000140000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[    0.000000]   NODE_DATA [0000000100000000 - 0000000100013fff]
[    0.000000]   bootmap [0000000100014000 -  000000010003bfff] pages 28
[    0.000000] (14/32 early reservations) ==> bootmem [0000000000 - 0140000000]
[    0.000000]   #0 [0001000000 - 0001e43878]    TEXT DATA BSS ==> [0001000000 - 0001e43878]
[    0.000000]   #1 [0037376000 - 0037ff0000]          RAMDISK ==> [0037376000 - 0037ff0000]
[    0.000000]   #2 [0001e44000 - 0001e44184]              BRK ==> [0001e44000 - 0001e44184]
[    0.000000]   #3 [00000f7e50 - 0000100000]    BIOS reserved ==> [00000f7e50 - 0000100000]
[    0.000000]   #4 [00000f7e40 - 00000f7e50]     MP-table mpf ==> [00000f7e40 - 00000f7e50]
[    0.000000]   #5 [000009f800 - 000009fd71]    BIOS reserved ==> [000009f800 - 000009fd71]
[    0.000000]   #6 [000009ff15 - 00000f7e40]    BIOS reserved ==> [000009ff15 - 00000f7e40]
[    0.000000]   #7 [000009fd71 - 000009ff15]     MP-table mpc ==> [000009fd71 - 000009ff15]
[    0.000000]   #8 [0000010000 - 0000012000]       TRAMPOLINE ==> [0000010000 - 0000012000]
[    0.000000]   #9 [0000012000 - 0000016000]      ACPI WAKEUP ==> [0000012000 - 0000016000]
[    0.000000]   #10 [0000016000 - 0000019000]          PGTABLE ==> [0000016000 - 0000019000]
[    0.000000]   #11 [0000019000 - 000001a000]          PGTABLE ==> [0000019000 - 000001a000]
[    0.000000]   #12 [0100000000 - 0100014000]        NODE_DATA ==> [0100000000 - 0100014000]
[    0.000000]   #13 [0100014000 - 010003c000]          BOOTMAP ==> [0100014000 - 010003c000]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880100600000-ffff880103dfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bf6d0
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 1046111
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 105 pages reserved
[    0.000000]   DMA zone: 3822 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 765704 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 258560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[    0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf6d0000 - 00000000bf6e3000
[    0.000000] PM: Registered nosave memory: 00000000bf6e3000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
[    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880002000000 s90496 r8192 d24192 u1048576
[    0.000000] pcpu-alloc: s90496 r8192 d24192 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1028086
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: ro root=/dev/mapper/vg_fc14-lv_root rd_LVM_LV=vg_fc14/lv_root rd_LVM_LV=vg_fc14/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=fr_FR.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=fr-latin9 rhgb quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4033040k/5242880k available (4551k kernel code, 1058436k absent, 151404k reserved, 7258k data, 948k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU-based detection of stalled CPUs is disabled.
[    0.000000]     Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:16640 nr_irqs:512
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 41943040 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: PIT calibration matches HPET. 1 loops
[    0.000000] Detected 2161.244 MHz processor.
[    0.002018] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.48 BogoMIPS (lpj=2161244)
[    0.003009] pid_max: default: 32768 minimum: 301
[    0.003065] Security Framework initialized
[    0.003081] SELinux:  Initializing.
[    0.003100] SELinux:  Starting in permissive mode
[    0.004547] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008140] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009630] Mount-cache hash table entries: 256
[    0.009969] Initializing cgroup subsys ns
[    0.009981] Initializing cgroup subsys cpuacct
[    0.010014] Initializing cgroup subsys memory
[    0.010049] Initializing cgroup subsys devices
[    0.010055] Initializing cgroup subsys freezer
[    0.010060] Initializing cgroup subsys net_cls
[    0.010065] Initializing cgroup subsys blkio
[    0.010148] CPU: Physical Processor ID: 0
[    0.010153] CPU: Processor Core ID: 0
[    0.010158] mce: CPU supports 6 MCE banks
[    0.010173] CPU0: Thermal monitoring enabled (TM2)
[    0.010182] using mwait in idle threads.
[    0.010187] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.010198] PEBS disabled due to CPU errata.
[    0.010206] ... version:                2
[    0.010210] ... bit width:              40
[    0.010214] ... generic registers:      2
[    0.010218] ... value mask:             000000ffffffffff
[    0.010223] ... max period:             000000007fffffff
[    0.010227] ... fixed-purpose events:   3
[    0.010231] ... event mask:             0000000700000003
[    0.011215] ACPI: Core revision 20100428
[    0.025018] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.025030] ftrace: allocating 23834 entries in 94 pages
[    0.027105] Setting APIC routing to flat
[    0.027502] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.037817] CPU0: Intel(R) Core(TM)2 Duo CPU     T5850  @ 2.16GHz stepping 0d
[    0.037999] Booting Node   0, Processors  #1 Ok.
[    0.109027] Brought up 2 CPUs
[    0.109033] Total of 2 processors activated (8644.80 BogoMIPS).
[    0.109893] sizeof(vma)=184 bytes
[    0.109896] sizeof(page)=56 bytes
[    0.109900] sizeof(inode)=584 bytes
[    0.109903] sizeof(dentry)=192 bytes
[    0.109906] sizeof(ext3inode)=800 bytes
[    0.109910] sizeof(buffer_head)=104 bytes
[    0.109913] sizeof(skbuff)=240 bytes
[    0.110007] sizeof(task_struct)=5944 bytes
[    0.110124] devtmpfs: initialized
[    0.122212] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.122247] Time: 10:49:45  Date: 03/18/11
[    0.122333] NET: Registered protocol family 16
[    0.122566] ACPI: bus type pci registered
[    0.122718] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.122728] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.183847] PCI: Using configuration type 1 for base access
[    0.186403] bio: create slab <bio-0> at 0
[    0.189459] ACPI: EC: Look up EC in DSDT
[    0.194496] ACPI: BIOS _OSI(Linux) query ignored
[    0.196721] ACPI: SSDT 00000000bf6db728 00238 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.197474] ACPI: Dynamic OEM Table Load:
[    0.197482] ACPI: SSDT (null) 00238 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.198038] ACPI: SSDT 00000000bf6db055 0064E (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.198729] ACPI: Dynamic OEM Table Load:
[    0.198736] ACPI: SSDT (null) 0064E (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.199603] ACPI: SSDT 00000000bf6db960 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.200338] ACPI: Dynamic OEM Table Load:
[    0.200345] ACPI: SSDT (null) 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.200648] ACPI: SSDT 00000000bf6db6a3 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.201355] ACPI: Dynamic OEM Table Load:
[    0.201362] ACPI: SSDT (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.202218] ACPI: Interpreter enabled
[    0.202225] ACPI: (supports S0 S3 S4 S5)
[    0.202271] ACPI: Using IOAPIC for interrupt routing
[    0.224937] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.225084] ACPI: Power Resource [QFAN] (off)
[    0.225615] ACPI: No dock devices found.
[    0.225622] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.226835] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.229223] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.229230] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.229236] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.229243] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.229249] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.229255] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.229262] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
[    0.229268] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
[    0.229426] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.229433] pci 0000:00:01.0: PME# disabled
[    0.229561] pci 0000:00:1a.0: reg 20: [io  0x1800-0x181f]
[    0.229655] pci 0000:00:1a.1: reg 20: [io  0x1820-0x183f]
[    0.229748] pci 0000:00:1a.7: reg 10: [mem 0xf4404800-0xf4404bff]
[    0.229842] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.229851] pci 0000:00:1a.7: PME# disabled
[    0.229917] pci 0000:00:1b.0: reg 10: [mem 0xf4400000-0xf4403fff 64bit]
[    0.229995] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.230009] pci 0000:00:1b.0: PME# disabled
[    0.230135] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.230143] pci 0000:00:1c.0: PME# disabled
[    0.230270] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.230278] pci 0000:00:1c.1: PME# disabled
[    0.230411] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.230419] pci 0000:00:1c.5: PME# disabled
[    0.230504] pci 0000:00:1d.0: reg 20: [io  0x1840-0x185f]
[    0.230604] pci 0000:00:1d.1: reg 20: [io  0x1860-0x187f]
[    0.230696] pci 0000:00:1d.2: reg 20: [io  0x1880-0x189f]
[    0.230789] pci 0000:00:1d.7: reg 10: [mem 0xf4404c00-0xf4404fff]
[    0.230882] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.230891] pci 0000:00:1d.7: PME# disabled
[    0.231126] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.231134] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.231142] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[    0.231150] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[    0.231158] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0260 (mask 00ff)
[    0.231236] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.231249] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.231261] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.231274] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.231286] pci 0000:00:1f.1: reg 20: [io  0x18a0-0x18af]
[    0.231372] pci 0000:00:1f.2: reg 10: [io  0x18d8-0x18df]
[    0.231383] pci 0000:00:1f.2: reg 14: [io  0x18cc-0x18cf]
[    0.231395] pci 0000:00:1f.2: reg 18: [io  0x18d0-0x18d7]
[    0.231406] pci 0000:00:1f.2: reg 1c: [io  0x18c8-0x18cb]
[    0.231418] pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ff]
[    0.231429] pci 0000:00:1f.2: reg 24: [mem 0xf4404000-0xf44047ff]
[    0.231484] pci 0000:00:1f.2: PME# supported from D3hot
[    0.231492] pci 0000:00:1f.2: PME# disabled
[    0.231535] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[    0.231566] pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
[    0.231708] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
[    0.231732] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.231755] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
[    0.231769] pci 0000:01:00.0: reg 24: [io  0x2000-0x207f]
[    0.231784] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.233024] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.233032] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.233039] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.233049] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.233128] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.233136] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.233145] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.233158] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.233234] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.233242] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.233251] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff]
[    0.233263] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.233400] pci 0000:06:00.0: reg 10: [mem 0xf4000000-0xf4003fff 64bit]
[    0.233416] pci 0000:06:00.0: reg 18: [io  0x4000-0x40ff]
[    0.233521] pci 0000:06:00.0: supports D1 D2
[    0.233525] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.233535] pci 0000:06:00.0: PME# disabled
[    0.233559] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.233569] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[    0.233577] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    0.233586] pci 0000:00:1c.5:   bridge window [mem 0xf4000000-0xf40fffff]
[    0.233600] pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.233689] pci 0000:07:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.233695] pci 0000:07:01.0: MMC cards are now supported by standard SDHCI controller
[    0.233713] pci 0000:07:01.0: reg 10: [mem 0xf4100000-0xf41007ff]
[    0.233798] pci 0000:07:01.0: supports D1 D2
[    0.233803] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.233811] pci 0000:07:01.0: PME# disabled
[    0.233870] pci 0000:07:01.1: reg 10: [mem 0xf4100800-0xf41008ff]
[    0.233955] pci 0000:07:01.1: supports D1 D2
[    0.233960] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.233968] pci 0000:07:01.1: PME# disabled
[    0.234030] pci 0000:07:01.2: reg 10: [mem 0xf4101000-0xf41010ff]
[    0.234115] pci 0000:07:01.2: supports D1 D2
[    0.234119] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.234128] pci 0000:07:01.2: PME# disabled
[    0.234225] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
[    0.234234] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.234243] pci 0000:00:1e.0:   bridge window [mem 0xf4100000-0xf41fffff]
[    0.234255] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.234262] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.234268] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
[    0.234315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.234777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.234970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.235156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.235351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.235615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.247424] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 12 14 15) *11
[    0.247631] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.247835] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 12 14 15)
[    0.248047] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.248249] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 12 14 15) *0, disabled.
[    0.248452] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    0.248653] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 12 14 15)
[    0.248862] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.248958] HEST: Table is not found!
[    0.249135] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.249147] vgaarb: loaded
[    0.249353] SCSI subsystem initialized
[    0.249374] libata version 3.00 loaded.
[    0.249374] usbcore: registered new interface driver usbfs
[    0.249374] usbcore: registered new interface driver hub
[    0.249374] usbcore: registered new device driver usb
[    0.249374] PCI: Using ACPI for IRQ routing
[    0.249374] PCI: pci_cache_line_size set to 64 bytes
[    0.249374] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.250007] reserve RAM buffer: 00000000bf6d0000 - 00000000bfffffff 
[    0.250211] NetLabel: Initializing
[    0.250216] NetLabel:  domain hash size = 128
[    0.250219] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.250249] NetLabel:  unlabeled traffic allowed by default
[    0.250388] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.250402] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.250413] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.253042] Switching to clocksource tsc
[    0.280687] pnp: PnP ACPI init
[    0.280734] ACPI: bus type pnp registered
[    0.288147] pnp 00:00: [bus 00-ff]
[    0.288154] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.288159] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.288164] pnp 00:00: [io  0x0d00-0xffff window]
[    0.288169] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.288174] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.288179] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.288184] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.288189] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.288194] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.288199] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.288204] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.288209] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.288214] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.288219] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.288231] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.288236] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.288241] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.288246] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    0.288251] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.288256] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.288398] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.288719] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.288724] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.288729] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.288734] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.288738] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.288742] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.288747] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    0.288751] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[    0.288935] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.289295] pnp 00:02: [io  0x0068]
[    0.289300] pnp 00:02: [io  0x006c]
[    0.289305] pnp 00:02: [io  0x0260-0x0261]
[    0.289323] pnp 00:02: [irq 10]
[    0.289409] pnp 00:02: Plug and Play ACPI device, IDs ITE8709 (active)
[    0.289998] pnp 00:03: [io  0x0000-0x001f]
[    0.290002] pnp 00:03: [io  0x0081-0x0091]
[    0.290007] pnp 00:03: [io  0x0093-0x009f]
[    0.290011] pnp 00:03: [io  0x00c0-0x00df]
[    0.290016] pnp 00:03: [dma 4]
[    0.290106] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.290132] pnp 00:04: [mem 0xff000000-0xffffffff]
[    0.290228] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[    0.290490] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[    0.290626] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.290657] pnp 00:06: [io  0x00f0]
[    0.290668] pnp 00:06: [irq 13]
[    0.290760] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.290791] pnp 00:07: [io  0x002e-0x002f]
[    0.290795] pnp 00:07: [io  0x004e-0x004f]
[    0.290799] pnp 00:07: [io  0x0061]
[    0.290803] pnp 00:07: [io  0x0063]
[    0.290807] pnp 00:07: [io  0x0065]
[    0.290811] pnp 00:07: [io  0x0067]
[    0.290815] pnp 00:07: [io  0x0080]
[    0.290819] pnp 00:07: [io  0x0092]
[    0.290833] pnp 00:07: [io  0x00b2-0x00b3]
[    0.290838] pnp 00:07: [io  0x0680-0x069f]
[    0.290842] pnp 00:07: [io  0x0800-0x080f]
[    0.290846] pnp 00:07: [io  0x1000-0x107f]
[    0.290850] pnp 00:07: [io  0x1180-0x11bf]
[    0.290855] pnp 00:07: [io  0x1640-0x164f]
[    0.290859] pnp 00:07: [io  0xfe00]
[    0.291036] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.291067] pnp 00:08: [io  0x0070-0x0077]
[    0.291077] pnp 00:08: [irq 8]
[    0.291171] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.291264] pnp 00:09: [io  0x0060]
[    0.291268] pnp 00:09: [io  0x0064]
[    0.291278] pnp 00:09: [irq 1]
[    0.291373] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.291404] pnp 00:0a: [irq 12]
[    0.291510] pnp 00:0a: Plug and Play ACPI device, IDs SYN101f SYN1000 SYN0002 PNP0f13 (active)
[    0.291569] pnp: PnP ACPI: found 11 devices
[    0.291573] ACPI: ACPI bus type pnp unregistered
[    0.291596] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.291603] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.291610] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.291616] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.291623] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.291629] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.291636] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.291642] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.291657] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.291671] system 00:07: [io  0x0680-0x069f] has been reserved
[    0.291677] system 00:07: [io  0x0800-0x080f] has been reserved
[    0.291683] system 00:07: [io  0x1000-0x107f] has been reserved
[    0.291689] system 00:07: [io  0x1180-0x11bf] has been reserved
[    0.291696] system 00:07: [io  0x1640-0x164f] has been reserved
[    0.291702] system 00:07: [io  0xfe00] has been reserved
[    0.300371] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.300379] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.300387] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.300394] pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.300401] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0600000-0xc06000ff]
[    0.300411] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0600000-0xc06000ff] (PCI address [0xc0600000-0xc06000ff]
[    0.300421] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[    0.300427] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.300433] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.300441] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.300449] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.300458] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.300465] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.300476] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.300484] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.300496] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.300502] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.300513] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff]
[    0.300521] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.300534] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[    0.300540] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    0.300551] pci 0000:00:1c.5:   bridge window [mem 0xf4000000-0xf40fffff]
[    0.300559] pci 0000:00:1c.5:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.300572] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[    0.300576] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.300586] pci 0000:00:1e.0:   bridge window [mem 0xf4100000-0xf41fffff]
[    0.300594] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.300617]   alloc irq_desc for 16 on node -1
[    0.300622]   alloc kstat_irqs on node -1
[    0.300633] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.300641] pci 0000:00:01.0: setting latency timer to 64
[    0.300657]   alloc irq_desc for 17 on node -1
[    0.300661]   alloc kstat_irqs on node -1
[    0.300669] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.300678] pci 0000:00:1c.0: setting latency timer to 64
[    0.300694] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.300702] pci 0000:00:1c.1: setting latency timer to 64
[    0.300718] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.300727] pci 0000:00:1c.5: setting latency timer to 64
[    0.300740] pci 0000:00:1e.0: setting latency timer to 64
[    0.300748] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.300754] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[    0.300759] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.300765] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[    0.300770] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.300776] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    0.300781] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.300786] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.300792] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.300797] pci_bus 0000:04: resource 1 [mem 0xf2000000-0xf3ffffff]
[    0.300802] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.300807] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    0.300812] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf40fffff]
[    0.300817] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.300832] pci_bus 0000:07: resource 1 [mem 0xf4100000-0xf41fffff]
[    0.300837] pci_bus 0000:07: resource 4 [io  0x0000-0xffff]
[    0.300842] pci_bus 0000:07: resource 5 [mem 0x00000000-0xffffffffffffffff]
[    0.300892] NET: Registered protocol family 2
[    0.301253] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.304339] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.310444] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.311207] TCP: Hash tables configured (established 524288 bind 65536)
[    0.311213] TCP reno registered
[    0.311239] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.311314] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.311541] NET: Registered protocol family 1
[    0.311862] pci 0000:01:00.0: Boot video device
[    0.311891] PCI: CLS 64 bytes, default 64
[    0.312012] Trying to unpack rootfs image as initramfs...
[    0.973715] Freeing initrd memory: 12776k freed
[    0.982111] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.982120] Placing 64MB software IO TLB between ffff88000211e000 - ffff88000611e000
[    0.982126] software IO TLB at phys 0x211e000 - 0x611e000
[    0.982231] Simple Boot Flag at 0x36 set to 0x1
[    0.983283] audit: initializing netlink socket (disabled)
[    0.983309] type=2000 audit(1300445385.981:1): initialized
[    1.016390] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.020070] VFS: Disk quotas dquot_6.5.2
[    1.020172] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.021271] msgmni has been set to 7901
[    1.021387] SELinux:  Registering netfilter hooks
[    1.022047] alg: No test for stdrng (krng)
[    1.022178] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.022187] io scheduler noop registered
[    1.022192] io scheduler deadline registered
[    1.022279] io scheduler cfq registered (default)
[    1.022642] pcieport 0000:00:01.0: setting latency timer to 64
[    1.022691]   alloc irq_desc for 40 on node -1
[    1.022695]   alloc kstat_irqs on node -1
[    1.022713] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.022879] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.022946]   alloc irq_desc for 41 on node -1
[    1.022950]   alloc kstat_irqs on node -1
[    1.022966] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    1.023165] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.023232]   alloc irq_desc for 42 on node -1
[    1.023236]   alloc kstat_irqs on node -1
[    1.023252] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    1.023440] pcieport 0000:00:1c.5: setting latency timer to 64
[    1.023507]   alloc irq_desc for 43 on node -1
[    1.023511]   alloc kstat_irqs on node -1
[    1.023526] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    1.023764] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.024042] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.024047] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.024486] acpiphp: Slot [1] registered
[    1.024729] pci-stub: invalid id string ""
[    1.024887] intel_idle: MWAIT substates: 0x22220
[    1.024892] intel_idle: does not run on family 6 model 15
[    1.025164] ACPI: AC Adapter [ACAD] (off-line)
[    1.025360] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.037136] ACPI: Lid Switch [LID]
[    1.037253] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.037266] ACPI: Power Button [PWRB]
[    1.037403] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.037410] ACPI: Power Button [PWRF]
[    1.037645] ACPI: Fan [FAN] (off)
[    1.038171] ACPI: acpi_idle registered with cpuidle
[    1.043695] Monitor-Mwait will be used to enter C-1 state
[    1.043746] Monitor-Mwait will be used to enter C-2 state
[    1.043794] Monitor-Mwait will be used to enter C-3 state
[    1.043807] Marking TSC unstable due to TSC halts in idle
[    1.043883] Switching to clocksource hpet
[    1.057343] thermal LNXTHERM:01: registered as thermal_zone0
[    1.057361] ACPI: Thermal Zone [THRM] (53 C)
[    1.057390] ERST: Table is not found!
[    1.058068] Non-volatile memory driver v1.3
[    1.058073] Linux agpgart interface v0.103
[    1.058508] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.062097] brd: module loaded
[    1.063460] loop: module loaded
[    1.063622] ahci 0000:00:1f.2: version 3.0
[    1.063646]   alloc irq_desc for 19 on node -1
[    1.063651]   alloc kstat_irqs on node -1
[    1.063663] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.063786]   alloc irq_desc for 44 on node -1
[    1.063790]   alloc kstat_irqs on node -1
[    1.063843] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.063950] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    1.063958] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
[    1.063968] ahci 0000:00:1f.2: setting latency timer to 64
[    1.064345] scsi0 : ahci
[    1.064539] scsi1 : ahci
[    1.064699] scsi2 : ahci
[    1.065032] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 44
[    1.065040] ata2: SATA max UDMA/133 abar m2048@0xf4404000 port 0xf4404180 irq 44
[    1.065046] ata3: SATA max UDMA/133 abar m2048@0xf4404000 port 0xf4404200 irq 44
[    1.065179] ata_piix 0000:00:1f.1: version 2.13
[    1.065221] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.065301] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.065464] scsi3 : ata_piix
[    1.065656] scsi4 : ata_piix
[    1.067082] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[    1.067088] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[    1.067401] Fixed MDIO Bus: probed
[    1.067575] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.067611]   alloc irq_desc for 18 on node -1
[    1.067616]   alloc kstat_irqs on node -1
[    1.067627] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.067655] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.067662] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.067782] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.067831] ehci_hcd 0000:00:1a.7: debug port 1
[    1.071719] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    1.071751] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4404800
[    1.081031] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.081076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.081082] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.081088] usb usb1: Product: EHCI Host Controller
[    1.081092] usb usb1: Manufacturer: Linux 2.6.35.10-74.fc14.x86_64 ehci_hcd
[    1.081096] usb usb1: SerialNumber: 0000:00:1a.7
[    1.081343] hub 1-0:1.0: USB hub found
[    1.081354] hub 1-0:1.0: 4 ports detected
[    1.081515]   alloc irq_desc for 23 on node -1
[    1.081519]   alloc kstat_irqs on node -1
[    1.081530] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.081554] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.081561] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.081652] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.081699] ehci_hcd 0000:00:1d.7: debug port 1
[    1.085603] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.085636] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4404c00
[    1.095031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.095068] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.095074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.095079] usb usb2: Product: EHCI Host Controller
[    1.095083] usb usb2: Manufacturer: Linux 2.6.35.10-74.fc14.x86_64 ehci_hcd
[    1.095088] usb usb2: SerialNumber: 0000:00:1d.7
[    1.095333] hub 2-0:1.0: USB hub found
[    1.095343] hub 2-0:1.0: 6 ports detected
[    1.095513] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.095544] uhci_hcd: USB Universal Host Controller Interface driver
[    1.095584] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.095601] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.095608] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.095709] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.095770] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    1.095913] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.095920] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.095924] usb usb3: Product: UHCI Host Controller
[    1.095929] usb usb3: Manufacturer: Linux 2.6.35.10-74.fc14.x86_64 uhci_hcd
[    1.095933] usb usb3: SerialNumber: 0000:00:1a.0
[    1.096134] hub 3-0:1.0: USB hub found
[    1.096143] hub 3-0:1.0: 2 ports detected
[    1.096342]   alloc irq_desc for 21 on node -1
[    1.096347]   alloc kstat_irqs on node -1
[    1.096392] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.096407] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.096414] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.096530] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.096588] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    1.096666] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.096672] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.096677] usb usb4: Product: UHCI Host Controller
[    1.096681] usb usb4: Manufacturer: Linux 2.6.35.10-74.fc14.x86_64 uhci_hcd
[    1.096685] usb usb4: SerialNumber: 0000:00:1a.1
[    1.096885] hub 4-0:1.0: USB hub found
[    1.096895] hub 4-0:1.0: 2 ports detected
[    1.097043] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.097055] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.097062] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.097168] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.097210] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[    1.097296] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.097302] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.097307] usb usb5: Product: UHCI Host Controller
[    1.097312] usb usb5: Manufacturer: Linux 2.6.35.10-74.fc14.x86_64 uhci_hcd
[    1.097316] usb usb5: SerialNumber: 0000:00:1d.0
[    1.097524] hub 5-0:1.0: USB hub found
[    1.097533] hub 5-0:1.0: 2 ports detected
[    1.097678] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.097690] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.097697] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.097780] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.097837] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[    1.097906] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.097912] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.097917] usb usb6: Product: UHCI Host Controller
[    1.097921] usb usb6: Manufacturer: Linux 2.6.35.10-74.fc14.x86_64 uhci_hcd
[    1.097925] usb usb6: SerialNumber: 0000:00:1d.1
[    1.098137] hub 6-0:1.0: USB hub found
[    1.098146] hub 6-0:1.0: 2 ports detected
[    1.098404] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.098417] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.098423] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.098516] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.098559] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[    1.098629] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.098635] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.098640] usb usb7: Product: UHCI Host Controller
[    1.098644] usb usb7: Manufacturer: Linux 2.6.35.10-74.fc14.x86_64 uhci_hcd
[    1.098648] usb usb7: SerialNumber: 0000:00:1d.2
[    1.098857] hub 7-0:1.0: USB hub found
[    1.098867] hub 7-0:1.0: 2 ports detected
[    1.099145] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.103743] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.105806] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.105819] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.105826] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.105833] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.105840] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.105944] mice: PS/2 mouse device common for all mice
[    1.106364] rtc_cmos 00:08: RTC can wake from S4
[    1.106525] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    1.106568] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.106727] device-mapper: uevent: version 1.0.3
[    1.106972] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: dm-devel@redhat.com
[    1.107300] cpuidle: using governor ladder
[    1.107549] cpuidle: using governor menu
[    1.108039] usbcore: registered new interface driver hiddev
[    1.108071] usbcore: registered new interface driver usbhid
[    1.108075] usbhid: USB HID core driver
[    1.108118] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.108416] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    1.108423] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    1.108429] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    1.108565] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.108590] TCP cubic registered
[    1.108594] Initializing XFRM netlink socket
[    1.108610] NET: Registered protocol family 17
[    1.108842] PM: Resume from disk failed.
[    1.108868] registered taskstats version 1
[    1.109442]   Magic number: 3:181:831
[    1.109600] rtc_cmos 00:08: setting system clock to 2011-03-18 10:49:46 UTC (1300445386)
[    1.109708] Initalizing network drop monitor service
[    1.147800] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.230352] ata4.00: ATAPI: Optiarc DVD RW AD-7530B, NX09, max UDMA/33
[    1.236370] ata4.00: configured for UDMA/33
[    1.370132] ata2: SATA link down (SStatus 0 SControl 300)
[    1.370167] ata3: SATA link down (SStatus 0 SControl 300)
[    1.383121] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.511971] usb 1-1: New USB device found, idVendor=04f2, idProduct=b024
[    1.511980] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.511987] usb 1-1: Product: USB 2.0 Camera
[    1.511992] usb 1-1: Manufacturer: Chicony Electronics Co., Ltd.
[    1.511997] usb 1-1: SerialNumber: SN0001
[    1.616162] usb 1-2: new high speed USB device using ehci_hcd and address 3
[    1.789158] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.799309] ata1.00: unexpected _GTF length (8)
[    1.799480] ata1.00: ATA-8: SAMSUNG HM320II, 2AC101C4, max UDMA/133
[    1.799486] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.809556] ata1.00: unexpected _GTF length (8)
[    1.809761] ata1.00: configured for UDMA/133
[    1.821395] ACPI: Battery Slot [BAT1] (battery present)
[    1.821732] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM320II  2AC1 PQ: 0 ANSI: 5
[    1.822023] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.822103] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.822155] sd 0:0:0:0: [sda] Write Protect is off
[    1.822161] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.822220] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.822678]  sda:
[    1.823702] scsi 3:0:0:0: CD-ROM            Optiarc  DVD RW AD-7530B  NX09 PQ: 0 ANSI: 5
[    1.834165] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.834173] Uniform CD-ROM driver Revision: 3.20
[    1.834425] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.834562] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    1.843143]  sda1 sda2 sda3
[    1.843806] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.843866] Freeing unused kernel memory: 948k freed
[    1.844281] Write protecting the kernel read-only data: 10240k
[    1.844988] Freeing unused kernel memory: 1576k freed
[    1.846276] Freeing unused kernel memory: 1836k freed
[    1.877638] dracut: dracut-006-5.fc14
[    1.890028] dracut: rd_NO_LUKS: removing cryptoluks activation
[    1.894361] usb 1-2: New USB device found, idVendor=18e8, idProduct=6229
[    1.894370] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.894377] usb 1-2: Product: 802.11 bg WLAN
[    1.894381] usb 1-2: Manufacturer: Ralink
[    1.905870] udev[90]: starting version 161
[    1.992181] acpi device:02: registered as cooling_device3
[    1.992538] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[    1.992636] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.032227] [drm] Initialized drm 1.1.0 20060810
[    2.093852] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.093865] nouveau 0000:01:00.0: setting latency timer to 64
[    2.099891] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x81a0b2, caps: 0xa04711/0xa00000/0x0
[    2.101140] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086800a2)
[    2.111658] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[    2.142879] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[    2.160313] usb 6-2: new low speed USB device using uhci_hcd and address 2
[    2.205035] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    2.205045] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    2.205051] [drm] nouveau 0000:01:00.0: Bios version 60.86.49.00
[    2.205058] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[    2.205063] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[    2.205068] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[    2.205075] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00000034
[    2.205081] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
[    2.205086] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011302 00000020
[    2.205091] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02032312 00020010
[    2.205096] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
[    2.205103] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[    2.205110] [drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
[    2.205117] [drm] nouveau 0000:01:00.0:   1: 0x00001130: type 0x30 idx 1 tag 0x07
[    2.205123] [drm] nouveau 0000:01:00.0:   2: 0x00002261: type 0x61 idx 2 tag 0x08
[    2.205129] [drm] nouveau 0000:01:00.0:   3: 0x00000210: type 0x10 idx 3 tag 0xff
[    2.205136] [drm] nouveau 0000:01:00.0:   4: 0x00000211: type 0x11 idx 4 tag 0xff
[    2.205142] [drm] nouveau 0000:01:00.0:   5: 0x00000213: type 0x13 idx 5 tag 0xff
[    2.205150] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC397
[    2.231288] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC6E3
[    2.250110] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD324
[    2.250127] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD416
[    2.252227] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD610
[    2.252233] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD675
[    2.273068] [drm] nouveau 0000:01:00.0: 0xD675: Condition still not met after 20ms, skipping following opcodes
[    2.273101] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[    2.273301] [TTM] Zone  kernel: Available graphics memory: 2025088 kiB.
[    2.273306] [TTM] Initializing pool allocator.
[    2.324936] usb 6-2: New USB device found, idVendor=046d, idProduct=c03e
[    2.324944] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.324951] usb 6-2: Product: USB-PS/2 Optical Mouse
[    2.324955] usb 6-2: Manufacturer: Logitech
[    2.331382] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    2.341367] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input6
[    2.341597] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0
[    3.337245] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[    3.348138] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[    3.528762] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x40260000, bo ffff88013799fc00
[    3.528884] fbcon: nouveaufb (fb0) is primary device
[    3.537059] Console: switching to colour frame buffer device 160x50
[    3.539393] fb0: nouveaufb frame buffer device
[    3.539397] drm: registered panic notifier
[    3.539403] Slow work thread pool: Starting up
[    3.539624] Slow work thread pool: Ready
[    3.539636] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[    3.583460] dracut: Starting plymouth daemon
[    3.963652] dracut: rd_NO_DM: removing DM RAID activation
[    3.972900] dracut: rd_NO_MD: removing MD RAID activation
[    4.308567] firewire_ohci 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.314133] sdhci: Secure Digital Host Controller Interface driver
[    4.314139] sdhci: Copyright(c) Pierre Ossman
[    4.383034] firewire_ohci: Added fw-ohci device 0000:07:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0
[    4.383078] sdhci-pci 0000:07:01.1: SDHCI controller found [1180:0822] (rev 19)
[    4.383109] sdhci-pci 0000:07:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    4.384192] sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    4.385331] Registered led device: mmc0::
[    4.387075] mmc0: SDHCI controller on PCI [0000:07:01.1] using DMA
[    4.605282] dracut: Scanning devices sda3  for LVM logical volumes vg_fc14/lv_root vg_fc14/lv_swap 
[    4.627625] dracut: inactive '/dev/vg_fc14/lv_root' [50.00 GiB] inherit
[    4.627765] dracut: inactive '/dev/vg_fc14/lv_home' [138.94 GiB] inherit
[    4.627896] dracut: inactive '/dev/vg_fc14/lv_swap' [5.88 GiB] inherit
[    4.881270] firewire_core: created device fw0: GUID 00004ce056681e00, S400
[    5.040356] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    5.072588] dracut: Mounted root filesystem /dev/mapper/vg_fc14-lv_root
[    5.188751] dracut: Loading SELinux policy
[    5.509795] type=1404 audit(1300445390.898:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    5.660791] SELinux: 2048 avtab hash slots, 213562 rules.
[    5.839745] SELinux: 2048 avtab hash slots, 213562 rules.
[    6.397501] SELinux:  9 users, 14 roles, 3496 types, 183 bools, 1 sens, 1024 cats
[    6.397511] SELinux:  81 classes, 213562 rules
[    6.409364] SELinux:  Completing initialization.
[    6.409369] SELinux:  Setting up existing superblocks.
[    6.409385] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    6.409399] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    6.410693] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    6.410708] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    6.410726] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    6.410771] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[    6.412872] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    6.412884] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    6.416577] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    6.416593] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    6.416603] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    6.416630] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    6.416653] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    6.416679] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    6.416735] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[    6.416761] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    6.418539] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    6.418566] SELinux: initialized (dev dm-0, type ext4), uses xattr
[    6.425635] type=1403 audit(1300445391.815:3): policy loaded auid=4294967295 ses=4294967295
[    7.086590] dracut: Switching root
[    8.183410] readahead: starting
[    9.597189] udev[487]: starting version 161
[   12.276983] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
[   12.276998] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
[   12.282309] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   12.361295] sky2: driver version 1.28
[   12.361418] sky2 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   12.361443] sky2 0000:06:00.0: setting latency timer to 64
[   12.361658] sky2 0000:06:00.0: Yukon-2 FE chip revision 3
[   12.361793]   alloc irq_desc for 45 on node -1
[   12.361798]   alloc kstat_irqs on node -1
[   12.361823] sky2 0000:06:00.0: irq 45 for MSI/MSI-X
[   12.366172] sky2 0000:06:00.0: eth0: addr 00:1e:68:89:3c:65
[   12.373574] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[   12.373586] ACPI: resource 0000:00:1f.3 [io  0x1c00-0x1c1f] conflicts with ACPI region SMBI [io  0x1c00-0x1c0f window disabled]
[   12.373592] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.419540] iTCO_vendor_support: vendor-support=0
[   12.430788] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   12.432259] iTCO_wdt: unable to reset NO_REBOOT flag, platform may have disabled it
[   12.637493] Linux video capture interface: v2.00
[   12.699033] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b024)
[   12.734222] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input7
[   12.734448] usbcore: registered new interface driver uvcvideo
[   12.734453] USB Video Class driver (v1.0.0)
[   12.810965] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
[   12.811881] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
[   12.948454] cfg80211: Calling CRDA to update world regulatory domain
[   13.245110] lirc_dev: IR Remote Control driver registered, major 249 
[   13.279580] lirc_ite8709: module is from the staging directory, the quality is unknown, you have been warned.
[   13.283243] lirc_ite8709 00:02: lirc_dev: driver lirc_ite8709 registered at minor = 0
[   13.285472] lirc_ite8709: device found : irq=10 io=0x260
[   13.446271] cfg80211: World regulatory domain updated:
[   13.446278]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.446285]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.446291]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.446297]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.446303]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.446309]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.718976] phy0: Selected rate control algorithm 'minstrel'
[   13.719403] Registered led device: rt73usb-phy0::radio
[   13.719449] Registered led device: rt73usb-phy0::assoc
[   13.719495] Registered led device: rt73usb-phy0::quality
[   13.720153] usbcore: registered new interface driver rt73usb
[   13.847555]   alloc irq_desc for 22 on node -1
[   13.847562]   alloc kstat_irqs on node -1
[   13.847577] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   13.847770]   alloc irq_desc for 46 on node -1
[   13.847775]   alloc kstat_irqs on node -1
[   13.847795] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   13.847847] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.025658] cfg80211: Calling CRDA for country: FR
[   14.033727] cfg80211: Regulatory domain changed to country: FR
[   14.033733]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.033739]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   14.033745]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   14.033751]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   14.033756]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   19.340762] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   19.774958] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   19.786555] SELinux: initialized (dev sda2, type ext4), uses xattr
[   19.899596] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   19.899620] SELinux: initialized (dev dm-2, type ext4), uses xattr
[   21.477544] Adding 6160380k swap on /dev/mapper/vg_fc14-lv_swap.  Priority:-1 extents:1 across:6160380k 
[   21.483772] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[   26.889455] /dev/vmmon[1380]: Module vmmon: registered with major=10 minor=165
[   26.889472] /dev/vmmon[1380]: Module vmmon: initialized
[   26.928568] /dev/vmci[1388]: VMCI: Driver initialized.
[   26.928703] /dev/vmci[1388]: Module vmci: registered with major=10 minor=57
[   26.928708] /dev/vmci[1388]: Module vmci: initialized
[   27.048204] SELinux: initialized (dev vmblock, type vmblock), uses genfs_contexts
[   27.151647] ppdev: user-space parallel port driver
[   27.916773] /dev/vmnet: open called by PID 1462 (vmnet-dhcpd)
[   27.916785] /dev/vmnet: hub 1 does not exist, allocating memory.
[   27.916812] /dev/vmnet: port on hub 1 successfully opened
[   27.919297] /dev/vmnet: open called by PID 1464 (vmnet-netifup)
[   27.919310] /dev/vmnet: port on hub 1 successfully opened
[   27.995593] /dev/vmnet: open called by PID 1467 (vmnet-dhcpd)
[   27.995606] /dev/vmnet: hub 8 does not exist, allocating memory.
[   27.995633] /dev/vmnet: port on hub 8 successfully opened
[   28.000880] /dev/vmnet: open called by PID 1472 (vmnet-natd)
[   28.000897] /dev/vmnet: port on hub 8 successfully opened
[   28.004839] /dev/vmnet: open called by PID 1473 (vmnet-netifup)
[   28.004865] /dev/vmnet: port on hub 8 successfully opened
[   28.426398] /dev/vmnet: open called by PID 1455 (vmnet-bridge)
[   28.426448] /dev/vmnet: hub 0 does not exist, allocating memory.
[   28.426490] /dev/vmnet: port on hub 0 successfully opened
[   28.426542] bridge-wlan0: device is wireless, enabling SMAC
[   28.426552] bridge-wlan0: up
[   28.454127] bridge-wlan0: attached
[   28.454220] bridge-wlan0: disabling the bridge
[   28.457039] bridge-wlan0: down
[   28.457047] bridge-wlan0: detached
[   28.476162] sky2 0000:06:00.0: eth0: enabling interface
[   28.669539] NET: Registered protocol family 10
[   28.670042] lo: Disabled Privacy Extensions
[   28.670122] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.472369] vboxdrv: Found 2 processor cores.
[   29.475506] VBoxDrv: dbg - g_abExecMemory=ffffffffa03a8240
[   29.475537] vboxdrv: fAsync=0 offMin=0x1d4 offMax=0x8e3
[   29.475598] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   29.475601] vboxdrv: Successfully loaded version 4.0.0 (interface 0x00160000).
[   30.181679] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[   30.182544] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   30.205464] /dev/vmnet: open called by PID 1455 (vmnet-bridge)
[   30.205477] /dev/vmnet: hub 0 does not exist, allocating memory.
[   30.205501] /dev/vmnet: port on hub 0 successfully opened
[   30.205518] bridge-eth0: up
[   30.205524] bridge-eth0: attached
[   31.097269] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[   31.106276] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[   31.127975] [drm] nouveau 0000:01:00.0: Allocating FIFO number 3
[   31.136191] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 3
[   33.822388] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.018130] vmnet8: no IPv6 routers present
[   39.570125] vmnet1: no IPv6 routers present
[   40.946080] eth0: no IPv6 routers present
[   48.689853] fuse init (API version 7.14)
[   48.729659] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[   48.746545] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   53.656586] [drm] nouveau 0000:01:00.0: Allocating FIFO number 4
[   53.668820] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 4
[   53.696694] [drm] nouveau 0000:01:00.0: Allocating FIFO number 5
[   53.713141] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 5
[   53.716139] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 4
[   53.744405] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 5
[   53.761193] [drm] nouveau 0000:01:00.0: Allocating FIFO number 4
[   53.772856] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 4
[   53.803661] [drm] nouveau 0000:01:00.0: Allocating FIFO number 5
[   53.812153] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 5
[   53.815097] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 4
[   53.826638] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 5
[   55.463832] [drm] nouveau 0000:01:00.0: Allocating FIFO number 4
[   55.473084] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 4
[  111.997039] CE: hpet increased min_delta_ns to 7500 nsec
[  276.687362] /dev/vmmon[2631]: PTSC: initialized at 2167000000 Hz using TSC
[  277.911060] [drm] nouveau 0000:01:00.0: Allocating FIFO number 5
[  277.919505] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 5
[  277.946858] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 5
[  278.501128] /dev/vmnet: open called by PID 2635 (vmware-vmx)
[  278.501161] device eth0 entered promiscuous mode
[  278.501184] bridge-eth0: enabled promiscuous mode
[  278.501190] /dev/vmnet: port on hub 0 successfully opened
[  300.753189] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[  300.877342] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b024)
[  300.917773] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input8
[  301.428290] device eth0 left promiscuous mode
[  301.428312] bridge-eth0: disabled promiscuous mode
[  301.428928] /dev/vmnet: open called by PID 2644 (vmware-vmx)
[  301.428947] device eth0 entered promiscuous mode
[  301.428959] bridge-eth0: enabled promiscuous mode
[  301.428962] /dev/vmnet: port on hub 0 successfully opened
[  303.150109] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[  303.274404] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b024)
[  303.310189] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input9
[  303.485113] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[  303.608955] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b024)
[  303.644243] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input10
[  304.137092] usb 1-1: usbfs: interface 0 claimed by uvcvideo while 'vmware-vmx' sets config #1
[  304.137277] usb 1-1: usbfs: interface 0 claimed by uvcvideo while 'vmware-vmx' sets config #1
[ 2355.298236] TCP lp registered
[ 3749.774040] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[ 3750.247396] phy1: Selected rate control algorithm 'minstrel'
[ 3750.250525] Registered led device: rt73usb-phy1::radio
[ 3750.251561] Registered led device: rt73usb-phy1::assoc
[ 3750.252258] Registered led device: rt73usb-phy1::quality
[ 3750.393952] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3750.539056] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[ 3751.008286] phy2: Selected rate control algorithm 'minstrel'
[ 3751.008588] Registered led device: rt73usb-phy2::radio
[ 3751.008611] Registered led device: rt73usb-phy2::assoc
[ 3751.008633] Registered led device: rt73usb-phy2::quality
[ 3751.207335] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3751.336076] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[ 3751.805845] phy3: Selected rate control algorithm 'minstrel'
[ 3751.806378] Registered led device: rt73usb-phy3::radio
[ 3751.806424] Registered led device: rt73usb-phy3::assoc
[ 3751.806468] Registered led device: rt73usb-phy3::quality
[ 3751.900289] phy3 -> rt73usb_wait_bbp_ready: Error - BBP register access failed, aborting.
[ 3751.900294] phy3 -> rt73usb_set_device_state: Error - Device failed to enter state 4 (-5).
[ 3752.023092] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[ 3752.492695] phy4: Selected rate control algorithm 'minstrel'
[ 3752.493243] Registered led device: rt73usb-phy4::radio
[ 3752.493289] Registered led device: rt73usb-phy4::assoc
[ 3752.493335] Registered led device: rt73usb-phy4::quality
[ 3752.619536] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Désoler pour la longueur de dmesg.
# dmesg | grep wlan0
[   28.426542] bridge-wlan0: device is wireless, enabling SMAC
[   28.426552] bridge-wlan0: up
[   28.454127] bridge-wlan0: attached
[   28.454220] bridge-wlan0: disabling the bridge
[   28.457039] bridge-wlan0: down
[   28.457047] bridge-wlan0: detached
[   33.822388] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3750.393952] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3751.207335] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3752.619536] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dans Network-Manager GUI je peux créer un Ad-hoc par exemple puis fermer la config mais si je veux modifier la clé ou autre paramètre tout devient grisé.
Ya du virtualbox sur ta machine, essaye de tout enlever si tu t'en sers pas. Vu que déjà au niveau configuration réseau il a créer un bridge sur wlan0, peut etre que ça perturbe NM. C'est une clef wifi usb? rt73usb?
madko wrote:Ya du virtualbox sur ta machine, essaye de tout enlever si tu t'en sers pas. Vu que déjà au niveau configuration réseau il a créer un bridge sur wlan0, peut etre que ça perturbe NM. C'est une clef wifi usb? rt73usb?
Pas de clef wifi usb c'est une carte intégrer au laptop.

Je vais virer virtualbox bien que VMware et Virtualbox ne m'avais pas poser de problème jusque là
Avant de toucher à ton système, tu peux booter sur un Fedora Live et regarder si la commande lspci trouve ta carte wifi....
t'as testé un dmesg | grep wlan* ?
au cas ou ta carte soit devenue wlan1 ?

j'ai deja vu ca avec des carte qui change de mac ! c'est juste une idée elle peut etre débile.....
didierg wrote:Avant de toucher à ton système, tu peux booter sur un Fedora Live et regarder si la commande lspci trouve ta carte wifi....
+1, s'il ne la trouve pas, cela pourrai aussi bien dire que ta carte wifi est morte, et tu auras beau bidouiller ce que tu veux dans ta fedora, cela ne la fera pas ressusciter...
chepioq wrote:
didierg wrote:Avant de toucher à ton système, tu peux booter sur un Fedora Live et regarder si la commande lspci trouve ta carte wifi....
+1, s'il ne la trouve pas, cela pourrai aussi bien dire que ta carte wifi est morte, et tu auras beau bidouiller ce que tu veux dans ta fedora, cela ne la fera pas ressusciter...
Désolé mais je suis en dual boot avec Win 7 et aucun soucis de wifi.

Je vais tester la réponse de chepioq mais même si le live découvre ma carte wifi que devrais je faire par la suite ?

Merci pour vos réponses.