Bon, je suis repassé en 2.6.22.1 pour avoir le wifi.
Voici le /var/log/messages
Aug 27 22:38:35 localhost kernel: Linux version 2.6.22.1-41.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Fri Jul 27 18:10:34 EDT 2007
Aug 27 22:38:35 localhost kernel: BIOS-provided physical RAM map:
Aug 27 22:38:35 localhost kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Aug 27 22:38:35 localhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Aug 27 22:38:35 localhost kernel: BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
Aug 27 22:38:35 localhost kernel: BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
Aug 27 22:38:35 localhost kernel: BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)
Aug 27 22:38:35 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Aug 27 22:38:35 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Aug 27 22:38:35 localhost kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Aug 27 22:38:35 localhost kernel: 639MB HIGHMEM available.
Aug 27 22:38:35 localhost kernel: 896MB LOWMEM available.
Aug 27 22:38:35 localhost kernel: Using x86 segment limits to approximate NX protection
Aug 27 22:38:35 localhost kernel: Zone PFN ranges:
Aug 27 22:38:35 localhost kernel: DMA 0 -> 4096
Aug 27 22:38:35 localhost kernel: Normal 4096 -> 229376
Aug 27 22:38:35 localhost kernel: HighMem 229376 -> 393200
Aug 27 22:38:35 localhost kernel: early_node_map[1] active PFN ranges
Aug 27 22:38:35 localhost kernel: 0: 0 -> 393200
Aug 27 22:38:35 localhost kernel: DMI 2.2 present.
Aug 27 22:38:35 localhost kernel: Using APIC driver default
Aug 27 22:38:35 localhost kernel: ACPI: RSDP 000F75C0, 0014 (r0 Nvidia)
Aug 27 22:38:35 localhost kernel: ACPI: RSDT 5FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
Aug 27 22:38:35 localhost kernel: ACPI: FACP 5FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
Aug 27 22:38:35 localhost kernel: ACPI: DSDT 5FFF30C0, 43E7 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
Aug 27 22:38:35 localhost kernel: ACPI: FACS 5FFF0000, 0040
Aug 27 22:38:35 localhost kernel: ACPI: APIC 5FFF74C0, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
Aug 27 22:38:35 localhost kernel: Nvidia board detected. Ignoring ACPI timer override.
Aug 27 22:38:35 localhost kernel: If you got timer trouble try acpi_use_timer_override
Aug 27 22:38:35 localhost kernel: ACPI: PM-Timer IO Port: 0x4008
Aug 27 22:38:35 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Aug 27 22:38:35 localhost kernel: Processor #0 6:10 APIC version 16
Aug 27 22:38:35 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Aug 27 22:38:35 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Aug 27 22:38:35 localhost kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Aug 27 22:38:35 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 27 22:38:35 localhost kernel: ACPI: BIOS IRQ0 pin2 override ignored.
Aug 27 22:38:35 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 27 22:38:35 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Aug 27 22:38:35 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Aug 27 22:38:35 localhost kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Aug 27 22:38:35 localhost kernel: Using ACPI (MADT) for SMP configuration information
Aug 27 22:38:35 localhost kernel: Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
Aug 27 22:38:35 localhost kernel: Built 1 zonelists. Total pages: 390129
Aug 27 22:38:35 localhost kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Aug 27 22:38:35 localhost kernel: Enabling fast FPU save and restore... done.
Aug 27 22:38:35 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Aug 27 22:38:35 localhost kernel: Initializing CPU#0
Aug 27 22:38:35 localhost kernel: CPU 0 irqstacks, hard=c0790000 soft=c0770000
Aug 27 22:38:35 localhost kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Aug 27 22:38:35 localhost kernel: Detected 1830.030 MHz processor.
Aug 27 22:38:35 localhost kernel: Console: colour VGA+ 80x25
Aug 27 22:38:35 localhost kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Aug 27 22:38:35 localhost kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug 27 22:38:35 localhost kernel: Memory: 1550552k/1572800k available (2105k kernel code, 20972k reserved, 1111k data, 260k init, 655296k highmem)
Aug 27 22:38:35 localhost kernel: virtual kernel memory layout:
Aug 27 22:38:35 localhost kernel: fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
Aug 27 22:38:35 localhost kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Aug 27 22:38:35 localhost kernel: vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Aug 27 22:38:35 localhost kernel: lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Aug 27 22:38:35 localhost kernel: .init : 0xc072a000 - 0xc076b000 ( 260 kB)
Aug 27 22:38:35 localhost kernel: .data : 0xc060e78e - 0xc0724504 (1111 kB)
Aug 27 22:38:35 localhost kernel: .text : 0xc0400000 - 0xc060e78e (2105 kB)
Aug 27 22:38:35 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Aug 27 22:38:35 localhost kernel: SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Aug 27 22:38:35 localhost kernel: Calibrating delay using timer specific routine.. 3661.71 BogoMIPS (lpj=1830855)
Aug 27 22:38:35 localhost kernel: Security Framework v1.0.0 initialized
Aug 27 22:38:35 localhost kernel: SELinux: Initializing.
Aug 27 22:38:35 localhost kernel: selinux_register_security: Registering secondary module capability
Aug 27 22:38:35 localhost kernel: Capability LSM initialized as secondary
Aug 27 22:38:35 localhost kernel: Mount-cache hash table entries: 512
Aug 27 22:38:35 localhost kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Aug 27 22:38:35 localhost kernel: CPU: L2 Cache: 512K (64 bytes/line)
Aug 27 22:38:35 localhost kernel: Intel machine check architecture supported.
Aug 27 22:38:35 localhost kernel: Intel machine check reporting enabled on CPU#0.
Aug 27 22:38:35 localhost kernel: Compat vDSO mapped to ffffe000.
Aug 27 22:38:35 localhost kernel: Checking 'hlt' instruction... OK.
Aug 27 22:38:35 localhost kernel: SMP alternatives: switching to UP code
Aug 27 22:38:35 localhost kernel: Freeing SMP alternatives: 14k freed
Aug 27 22:38:35 localhost kernel: ACPI: Core revision 20070126
Aug 27 22:38:35 localhost kernel: CPU0: AMD Athlon(tm) XP 2500+ stepping 00
Aug 27 22:38:35 localhost kernel: Total of 1 processors activated (3661.71 BogoMIPS).
Aug 27 22:38:35 localhost kernel: ENABLING IO-APIC IRQs
Aug 27 22:38:35 localhost kernel: ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Aug 27 22:38:35 localhost kernel: APIC calibration not consistent with PM Timer: 97ms instead of 100ms
Aug 27 22:38:35 localhost kernel: APIC delta adjusted to PM-Timer: 2079546 (2037619)
Aug 27 22:38:35 localhost kernel: Brought up 1 CPUs
Aug 27 22:38:35 localhost kernel: Time: 22:37:53 Date: 07/27/107
Aug 27 22:38:35 localhost kernel: NET: Registered protocol family 16
Aug 27 22:38:35 localhost kernel: ACPI: bus type pci registered
Aug 27 22:38:35 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
Aug 27 22:38:35 localhost kernel: PCI: Using configuration type 1
Aug 27 22:38:35 localhost kernel: Setting up standard PCI resources
Aug 27 22:38:35 localhost kernel: ACPI: Interpreter enabled
Aug 27 22:38:35 localhost kernel: ACPI: (supports S0 S1 S4 S5)
Aug 27 22:38:35 localhost kernel: ACPI: Using IOAPIC for interrupt routing
Aug 27 22:38:35 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 27 22:38:35 localhost kernel: PCI: nForce2 C1 Halt Disconnect fixup
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 6 7 10 11 12 14 15)
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 *12 14 15)
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APC1] (IRQs *16)
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APC3] (IRQs *18)
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APC4] (IRQs *19)
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APCS] (IRQs *23)
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
Aug 27 22:38:35 localhost kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Aug 27 22:38:35 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Aug 27 22:38:35 localhost kernel: pnp: PnP ACPI init
Aug 27 22:38:35 localhost kernel: ACPI: bus type pnp registered
Aug 27 22:38:35 localhost kernel: pnp: PnP ACPI: found 13 devices
Aug 27 22:38:35 localhost kernel: ACPI: ACPI bus type pnp unregistered
Aug 27 22:38:35 localhost kernel: usbcore: registered new interface driver usbfs
Aug 27 22:38:35 localhost kernel: usbcore: registered new interface driver hub
Aug 27 22:38:35 localhost kernel: usbcore: registered new device driver usb
Aug 27 22:38:35 localhost kernel: PCI: Using ACPI for IRQ routing
Aug 27 22:38:35 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Aug 27 22:38:35 localhost kernel: NetLabel: Initializing
Aug 27 22:38:35 localhost kernel: NetLabel: domain hash size = 128
Aug 27 22:38:35 localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4
Aug 27 22:38:35 localhost kernel: NetLabel: unlabeled traffic allowed by default
Aug 27 22:38:35 localhost kernel: ACPI: RTC can wake from S4
Aug 27 22:38:35 localhost kernel: pnp: 00:00: ioport range 0x4000-0x407f has been reserved
Aug 27 22:38:35 localhost kernel: pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
Aug 27 22:38:35 localhost kernel: pnp: 00:00: ioport range 0x4400-0x447f has been reserved
Aug 27 22:38:35 localhost kernel: pnp: 00:00: ioport range 0x4480-0x44ff has been reserved
Aug 27 22:38:35 localhost kernel: pnp: 00:00: ioport range 0x4200-0x427f has been reserved
Aug 27 22:38:35 localhost kernel: pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
Aug 27 22:38:35 localhost kernel: pnp: 00:01: ioport range 0x5000-0x503f has been reserved
Aug 27 22:38:35 localhost kernel: pnp: 00:01: ioport range 0x5500-0x553f has been reserved
Aug 27 22:38:35 localhost kernel: pnp: 00:02: iomem range 0xd1800-0xd3fff has been reserved
Aug 27 22:38:35 localhost kernel: pnp: 00:02: iomem range 0xf0000-0xf7fff could not be reserved
Aug 27 22:38:35 localhost kernel: pnp: 00:02: iomem range 0xf8000-0xfbfff could not be reserved
Aug 27 22:38:35 localhost kernel: pnp: 00:02: iomem range 0xfc000-0xfffff could not be reserved
Aug 27 22:38:35 localhost kernel: Time: tsc clocksource has been installed.
Aug 27 22:38:35 localhost kernel: PCI: Bridge: 0000:00:08.0
Aug 27 22:38:36 localhost kernel: IO window: disabled.
Aug 27 22:38:36 localhost kernel: MEM window: e6000000-e6ffffff
Aug 27 22:38:36 localhost kernel: PREFETCH window: disabled.
Aug 27 22:38:36 localhost kernel: PCI: Bridge: 0000:00:1e.0
Aug 27 22:38:36 localhost kernel: IO window: d000-dfff
Aug 27 22:38:36 localhost kernel: MEM window: e4000000-e5ffffff
Aug 27 22:38:36 localhost kernel: PREFETCH window: c0000000-dfffffff
Aug 27 22:38:36 localhost kernel: NET: Registered protocol family 2
Aug 27 22:38:36 localhost kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug 27 22:38:36 localhost kernel: TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
Aug 27 22:38:36 localhost kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Aug 27 22:38:36 localhost kernel: TCP: Hash tables configured (established 131072 bind 65536)
Aug 27 22:38:36 localhost kernel: TCP reno registered
Aug 27 22:38:36 localhost kernel: checking if image is initramfs... it is
Aug 27 22:38:36 localhost kernel: Freeing initrd memory: 3491k freed
Aug 27 22:38:36 localhost kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Aug 27 22:38:36 localhost kernel: apm: overridden by ACPI.
Aug 27 22:38:36 localhost kernel: audit: initializing netlink socket (disabled)
Aug 27 22:38:36 localhost kernel: audit(1188254272.575:1): initialized
Aug 27 22:38:36 localhost kernel: highmem bounce pool size: 64 pages
Aug 27 22:38:36 localhost kernel: Total HugeTLB memory allocated, 0
Aug 27 22:38:36 localhost kernel: VFS: Disk quotas dquot_6.5.1
Aug 27 22:38:36 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug 27 22:38:36 localhost kernel: ksign: Installing public key data
Aug 27 22:38:36 localhost kernel: Loading keyring
Aug 27 22:38:36 localhost kernel: - Added public key 511F5DD0680EFF29
Aug 27 22:38:36 localhost kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
Aug 27 22:38:36 localhost kernel: io scheduler noop registered
Aug 27 22:38:36 localhost kernel: io scheduler anticipatory registered
Aug 27 22:38:36 localhost kernel: io scheduler deadline registered
Aug 27 22:38:36 localhost kernel: io scheduler cfq registered (default)
Aug 27 22:38:36 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug 27 22:38:36 localhost kernel: isapnp: Scanning for PnP cards...
Aug 27 22:38:36 localhost kernel: Switched to high resolution mode on CPU 0
Aug 27 22:38:36 localhost kernel: isapnp: No Plug & Play device found
Aug 27 22:38:36 localhost kernel: Generic RTC Driver v1.07
Aug 27 22:38:36 localhost kernel: Non-volatile memory driver v1.2
Aug 27 22:38:36 localhost kernel: Linux agpgart interface v0.102 (c) Dave Jones
Aug 27 22:38:36 localhost kernel: agpgart: Detected NVIDIA nForce2 chipset
Aug 27 22:38:36 localhost kernel: agpgart: AGP aperture is 64M @ 0xe0000000
Aug 27 22:38:36 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Aug 27 22:38:36 localhost kernel: 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 27 22:38:36 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Aug 27 22:38:36 localhost kernel: input: Macintosh mouse button emulation as /class/input/input0
Aug 27 22:38:36 localhost kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Aug 27 22:38:36 localhost kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
Aug 27 22:38:36 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 27 22:38:36 localhost kernel: mice: PS/2 mouse device common for all mice
Aug 27 22:38:36 localhost kernel: input: AT Translated Set 2 keyboard as /class/input/input1
Aug 27 22:38:36 localhost kernel: usbcore: registered new interface driver hiddev
Aug 27 22:38:36 localhost kernel: usbcore: registered new interface driver usbhid
Aug 27 22:38:36 localhost kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Aug 27 22:38:36 localhost kernel: TCP cubic registered
Aug 27 22:38:36 localhost kernel: Initializing XFRM netlink socket
Aug 27 22:38:36 localhost kernel: NET: Registered protocol family 1
Aug 27 22:38:36 localhost kernel: NET: Registered protocol family 17
Aug 27 22:38:36 localhost kernel: powernow-k8: Processor cpuid 6a0 not supported
Aug 27 22:38:36 localhost kernel: Using IPI No-Shortcut mode
Aug 27 22:38:36 localhost kernel: Magic number: 3:956:654
Aug 27 22:38:36 localhost kernel: drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Aug 27 22:38:36 localhost kernel: Freeing unused kernel memory: 260k freed
Aug 27 22:38:36 localhost kernel: Write protecting the kernel read-only data: 858k
Aug 27 22:38:36 localhost kernel: USB Universal Host Controller Interface driver v3.0
Aug 27 22:38:36 localhost mcstransd: mcstransd starting
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
Aug 27 22:38:36 localhost kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
Aug 27 22:38:36 localhost kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
Aug 27 22:38:36 localhost kernel: ohci_hcd 0000:00:02.0: irq 16, io mem 0xe7002000
Aug 27 22:38:36 localhost mcstransd: mcstransd initialized
Aug 27 22:38:36 localhost kernel: usb usb1: configuration #1 chosen from 1 choice
Aug 27 22:38:36 localhost kernel: hub 1-0:1.0: USB hub found
Aug 27 22:38:36 localhost kernel: hub 1-0:1.0: 3 ports detected
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
Aug 27 22:38:36 localhost kernel: ohci_hcd 0000:00:02.1: OHCI Host Controller
Aug 27 22:38:36 localhost kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
Aug 27 22:38:36 localhost kernel: ohci_hcd 0000:00:02.1: irq 17, io mem 0xe7003000
Aug 27 22:38:36 localhost kernel: usb usb2: configuration #1 chosen from 1 choice
Aug 27 22:38:36 localhost kernel: hub 2-0:1.0: USB hub found
Aug 27 22:38:36 localhost kernel: hub 2-0:1.0: 3 ports detected
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 18
Aug 27 22:38:36 localhost kernel: ohci_hcd 0000:01:08.0: OHCI Host Controller
Aug 27 22:38:36 localhost kernel: ohci_hcd 0000:01:08.0: new USB bus registered, assigned bus number 3
Aug 27 22:38:36 localhost kernel: ohci_hcd 0000:01:08.0: irq 18, io mem 0xe6002000
Aug 27 22:38:36 localhost kernel: usb usb3: configuration #1 chosen from 1 choice
Aug 27 22:38:36 localhost kernel: hub 3-0:1.0: USB hub found
Aug 27 22:38:36 localhost kernel: hub 3-0:1.0: 3 ports detected
Aug 27 22:38:36 localhost kernel: usb 1-2: new low speed USB device using ohci_hcd and address 2
Aug 27 22:38:36 localhost kernel: usb 1-2: configuration #1 chosen from 1 choice
Aug 27 22:38:36 localhost kernel: input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
Aug 27 22:38:36 localhost kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt 0000:01:08.1[b] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
Aug 27 22:38:36 localhost kernel: ohci_hcd 0000:01:08.1: OHCI Host Controller
Aug 27 22:38:36 localhost kernel: ohci_hcd 0000:01:08.1: new USB bus registered, assigned bus number 4
Aug 27 22:38:36 localhost kernel: ohci_hcd 0000:01:08.1: irq 19, io mem 0xe6003000
Aug 27 22:38:36 localhost kernel: usb 1-3: new full speed USB device using ohci_hcd and address 3
Aug 27 22:38:36 localhost kernel: usb usb4: configuration #1 chosen from 1 choice
Aug 27 22:38:36 localhost kernel: hub 4-0:1.0: USB hub found
Aug 27 22:38:36 localhost kernel: hub 4-0:1.0: 2 ports detected
Aug 27 22:38:36 localhost kernel: usb 1-3: configuration #1 chosen from 1 choice
Aug 27 22:38:36 localhost kernel: usb 2-2: new full speed USB device using ohci_hcd and address 2
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 20
Aug 27 22:38:36 localhost kernel: ehci_hcd 0000:00:02.2: EHCI Host Controller
Aug 27 22:38:36 localhost kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 5
Aug 27 22:38:36 localhost kernel: ehci_hcd 0000:00:02.2: debug port 1
Aug 27 22:38:36 localhost kernel: ehci_hcd 0000:00:02.2: irq 20, io mem 0xe7004000
Aug 27 22:38:36 localhost kernel: ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 27 22:38:36 localhost kernel: usb usb5: configuration #1 chosen from 1 choice
Aug 27 22:38:36 localhost kernel: hub 5-0:1.0: USB hub found
Aug 27 22:38:36 localhost kernel: hub 5-0:1.0: 6 ports detected
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt 0000:01:08.2[C] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 21
Aug 27 22:38:36 localhost kernel: ehci_hcd 0000:01:08.2: EHCI Host Controller
Aug 27 22:38:36 localhost kernel: ehci_hcd 0000:01:08.2: new USB bus registered, assigned bus number 6
Aug 27 22:38:36 localhost kernel: ehci_hcd 0000:01:08.2: irq 21, io mem 0xe6004000
Aug 27 22:38:36 localhost kernel: ehci_hcd 0000:01:08.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
Aug 27 22:38:36 localhost kernel: usb usb6: configuration #1 chosen from 1 choice
Aug 27 22:38:36 localhost kernel: hub 6-0:1.0: USB hub found
Aug 27 22:38:36 localhost kernel: hub 6-0:1.0: 5 ports detected
Aug 27 22:38:36 localhost kernel: SCSI subsystem initialized
Aug 27 22:38:36 localhost kernel: scsi0 : pata_amd
Aug 27 22:38:36 localhost kernel: scsi1 : pata_amd
Aug 27 22:38:36 localhost kernel: ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
Aug 27 22:38:36 localhost kernel: ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
Aug 27 22:38:36 localhost kernel: usb 2-2: device not accepting address 2, error -62
Aug 27 22:38:36 localhost kernel: ata1.00: ATA-7: Maxtor 6Y080P0, YAR41BW0, max UDMA/133
Aug 27 22:38:36 localhost kernel: ata1.00: 160086528 sectors, multi 16: LBA
Aug 27 22:38:36 localhost kernel: ata1.01: ATA-7: Maxtor 6L160P0, BAH41G10, max UDMA/133
Aug 27 22:38:36 localhost kernel: ata1.01: 320173056 sectors, multi 16: LBA48
Aug 27 22:38:36 localhost kernel: ata1.00: configured for UDMA/133
Aug 27 22:38:36 localhost kernel: ata1.01: configured for UDMA/133
Aug 27 22:38:36 localhost kernel: usb 1-2: USB disconnect, address 2
Aug 27 22:38:36 localhost kernel: usb 1-3: USB disconnect, address 3
Aug 27 22:38:36 localhost kernel: ata2.00: ATAPI: SAMSUNG CD-R/RW SW-240B, R403, max MWDMA2
Aug 27 22:38:36 localhost kernel: ata2.01: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB02, max UDMA/33
Aug 27 22:38:36 localhost kernel: ata2.00: configured for MWDMA2
Aug 27 22:38:36 localhost kernel: ata2.01: configured for UDMA/33
Aug 27 22:38:36 localhost kernel: scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080P0 YAR4 PQ: 0 ANSI: 5
Aug 27 22:38:36 localhost kernel: sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
Aug 27 22:38:36 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Aug 27 22:38:36 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 27 22:38:36 localhost kernel: sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
Aug 27 22:38:36 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Aug 27 22:38:36 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 27 22:38:36 localhost kernel: sda: sda1
Aug 27 22:38:36 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Aug 27 22:38:36 localhost kernel: scsi 0:0:1:0: Direct-Access ATA Maxtor 6L160P0 BAH4 PQ: 0 ANSI: 5
Aug 27 22:38:36 localhost kernel: sd 0:0:1:0: [sdb] 320173056 512-byte hardware sectors (163929 MB)
Aug 27 22:38:36 localhost kernel: sd 0:0:1:0: [sdb] Write Protect is off
Aug 27 22:38:36 localhost kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 27 22:38:36 localhost kernel: sd 0:0:1:0: [sdb] 320173056 512-byte hardware sectors (163929 MB)
Aug 27 22:38:36 localhost kernel: sd 0:0:1:0: [sdb] Write Protect is off
Aug 27 22:38:36 localhost kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 27 22:38:36 localhost kernel: sdb: sdb1 sdb2 sdb3
Aug 27 22:38:36 localhost kernel: sd 0:0:1:0: [sdb] Attached SCSI disk
Aug 27 22:38:36 localhost kernel: scsi 1:0:0:0: CD-ROM SAMSUNG CD-R/RW SW-240B R403 PQ: 0 ANSI: 5
Aug 27 22:38:36 localhost kernel: scsi 1:0:1:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB02 PQ: 0 ANSI: 5
Aug 27 22:38:36 localhost kernel: usb 1-2: new low speed USB device using ohci_hcd and address 4
Aug 27 22:38:36 localhost kernel: usb 1-2: configuration #1 chosen from 1 choice
Aug 27 22:38:36 localhost kernel: input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
Aug 27 22:38:36 localhost kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2
Aug 27 22:38:36 localhost kernel: usb 1-3: new full speed USB device using ohci_hcd and address 5
Aug 27 22:38:36 localhost kernel: usb 1-3: configuration #1 chosen from 1 choice
Aug 27 22:38:36 localhost kernel: usb 2-2: new full speed USB device using ohci_hcd and address 4
Aug 27 22:38:36 localhost kernel: usb 2-2: configuration #1 chosen from 1 choice
Aug 27 22:38:36 localhost kernel: usb 4-1: new low speed USB device using ohci_hcd and address 2
Aug 27 22:38:36 localhost kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Aug 27 22:38:36 localhost kernel: kjournald starting. Commit interval 5 seconds
Aug 27 22:38:36 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 27 22:38:36 localhost kernel: audit(1188254280.356:2): enforcing=1 old_enforcing=0 auid=4294967295
Aug 27 22:38:36 localhost kernel: audit(1188254280.606:3): policy loaded auid=4294967295
Aug 27 22:38:36 localhost kernel: usb 4-1: configuration #1 chosen from 1 choice
Aug 27 22:38:36 localhost kernel: usb 3-2: new full speed USB device using ohci_hcd and address 2
Aug 27 22:38:36 localhost kernel: usb 3-2: configuration #1 chosen from 1 choice
Aug 27 22:38:36 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 27 22:38:36 localhost kernel: sd 0:0:1:0: Attached scsi generic sg1 type 0
Aug 27 22:38:36 localhost kernel: scsi 1:0:0:0: Attached scsi generic sg2 type 5
Aug 27 22:38:36 localhost kernel: scsi 1:0:1:0: Attached scsi generic sg3 type 5
Aug 27 22:38:36 localhost kernel: sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Aug 27 22:38:36 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Aug 27 22:38:36 localhost kernel: sr1: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
Aug 27 22:38:36 localhost kernel: Floppy drive(s): fd0 is 1.44M
Aug 27 22:38:36 localhost kernel: FDC 0 is a post-1991 82077
Aug 27 22:38:36 localhost kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
Aug 27 22:38:36 localhost kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0517
Aug 27 22:38:36 localhost kernel: usbcore: registered new interface driver usblp
Aug 27 22:38:36 localhost kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Aug 27 22:38:36 localhost kernel: rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Aug 27 22:38:36 localhost kernel: rtc0: alarms up to one year, y3k
Aug 27 22:38:36 localhost kernel: eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
Aug 27 22:38:36 localhost kernel: i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
Aug 27 22:38:36 localhost kernel: i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5500
Aug 27 22:38:36 localhost kernel: parport_pc 00:0b: reported by Plug and Play ACPI
Aug 27 22:38:36 localhost kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Aug 27 22:38:36 localhost kernel: Linux video capture interface: v2.00
Aug 27 22:38:36 localhost kernel: drivers/media/video/usbvideo/quickcam_messenger.c: Logitech Quickcam Messenger USB v0.01
Aug 27 22:38:36 localhost kernel: usbcore: registered new interface driver snd-usb-audio
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17
Aug 27 22:38:36 localhost kernel: videodev: "QCM USB Camera" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
Aug 27 22:38:36 localhost kernel: drivers/media/video/usbvideo/usbvideo.c: QCM on /dev/video0: canvas=320x240 videosize=320x240
Aug 27 22:38:36 localhost kernel: input: QCM button as /class/input/input4
Aug 27 22:38:36 localhost kernel: usbcore: registered new interface driver QCM
Aug 27 22:38:36 localhost kernel: intel8x0_measure_ac97_clock: measured 51074 usecs
Aug 27 22:38:36 localhost kernel: intel8x0: clocking to 47450
Aug 27 22:38:36 localhost kernel: NET: Registered protocol family 10
Aug 27 22:38:36 localhost kernel: lo: Disabled Privacy Extensions
Aug 27 22:38:36 localhost kernel: Mobile IPv6
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
Aug 27 22:38:36 localhost kernel: [drm] Initialized drm 1.1.0 20060810
Aug 27 22:38:36 localhost kernel: [drm] Initialized radeon 1.27.0 20060524 on minor 0
Aug 27 22:38:36 localhost kernel: No dock devices found.
Aug 27 22:38:36 localhost kernel: input: Power Button (FF) as /class/input/input5
Aug 27 22:38:36 localhost kernel: ACPI: Power Button (FF) [PWRF]
Aug 27 22:38:36 localhost kernel: input: Power Button (CM) as /class/input/input6
Aug 27 22:38:36 localhost kernel: ACPI: Power Button (CM) [PWRB]
Aug 27 22:38:36 localhost kernel: device-mapper: multipath: version 1.0.5 loaded
Aug 27 22:38:36 localhost kernel: EXT3 FS on dm-0, internal journal
Aug 27 22:38:36 localhost kernel: kjournald starting. Commit interval 5 seconds
Aug 27 22:38:36 localhost kernel: EXT3 FS on sdb2, internal journal
Aug 27 22:38:36 localhost rpcbind: cannot bind * on udp: Address already in use
Aug 27 22:38:36 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 27 22:38:36 localhost rpcbind: cannot bind tcp: Address already in use
Aug 27 22:38:36 localhost kernel: fuse init (API version 7.8)
Aug 27 22:38:36 localhost kernel: Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k
Aug 27 22:38:36 localhost kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Aug 27 22:38:36 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Aug 27 22:38:36 localhost kernel: Netfilter messages via NETLINK v0.30.
Aug 27 22:38:36 localhost kernel: nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
Aug 27 22:38:36 localhost kernel: eth1: no link during initialization.
Aug 27 22:38:36 localhost kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready
Aug 27 22:38:36 localhost kernel: ndiswrapper version 1.46 loaded (smp=yes)
Aug 27 22:38:36 localhost kernel: ndiswrapper: driver bcmwl5 (Linksys,07/17/2003, 3.30.15.0) loaded
Aug 27 22:38:36 localhost kernel: ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
Aug 27 22:38:36 localhost kernel: ndiswrapper: using IRQ 19
Aug 27 22:38:36 localhost kernel: wlan0: ethernet device 00:0c:41:64:61:08 using NDIS driver: bcmwl5, version: 0x50000, NDIS version: 0x500, vendor: 'NDIS Network Adapter', 14E4:4320.5.conf
Aug 27 22:38:36 localhost kernel: wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
Aug 27 22:38:36 localhost kernel: usbcore: registered new interface driver ndiswrapper
Aug 27 22:38:36 localhost kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Aug 27 22:38:36 localhost kernel: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Aug 27 22:38:36 localhost kernel: audit(1188247115.176:4): audit_pid=2146 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
Aug 27 22:38:36 localhost rpc.statd[2251]: Version 1.1.0 Starting
Aug 27 22:38:37 localhost sm-notify[2253]: sm-notify running as root. chown /var/lib/nfs/sm to choose different user
Aug 27 22:38:37 localhost Backgrounding to notify hosts...
Aug 27 22:38:39 localhost pcscd: pcscdaemon.c:533:main() pcsc-lite 1.3.3 daemon ready.
Aug 27 22:38:40 localhost upsd[2397]: Can't connect to UPS [mgeups] (mgeups): No such file or directory
Aug 27 22:38:40 localhost upsd[2398]: Startup successful
Aug 27 22:38:40 localhost upsmon[2401]: Startup successful
Aug 27 22:38:40 localhost upsd[2398]: Connection from ::ffff:127.0.0.1
Aug 27 22:38:40 localhost upsd[2398]: Client monuser@::ffff:127.0.0.1 logged into UPS [mgeups]
Aug 27 22:38:40 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:38:40 localhost automount[2419]: lookup_read_master: lookup(nisplus): couldn't locat nis+ table auto.master
Aug 27 22:38:41 localhost hpiod: 1.7.4a accepting connections at 2208...
Aug 27 22:38:45 localhost dhcdbd: Started up.
Aug 27 22:38:45 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:38:46 localhost upsmon[2402]: UPS mgeups@localhost is unavailable
Aug 27 22:38:46 localhost wall[2681]: wall: user nut broadcasted 1 lines (37 chars)
Aug 27 22:38:46 localhost avahi-daemon[2695]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
Aug 27 22:38:47 localhost avahi-daemon[2695]: Successfully dropped root privileges.
Aug 27 22:38:47 localhost avahi-daemon[2695]: avahi-daemon 0.6.17 starting up.
Aug 27 22:38:47 localhost avahi-daemon[2695]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Aug 27 22:38:47 localhost avahi-daemon[2695]: Successfully called chroot().
Aug 27 22:38:48 localhost avahi-daemon[2695]: Successfully dropped remaining capabilities.
Aug 27 22:38:48 localhost avahi-daemon[2695]: Loading service file /services/sftp-ssh.service.
Aug 27 22:38:49 localhost avahi-daemon[2695]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
Aug 27 22:38:49 localhost avahi-daemon[2695]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::20c:41ff:fe64:6108.
Aug 27 22:38:49 localhost avahi-daemon[2695]: New relevant interface wlan0.IPv6 for mDNS.
Aug 27 22:38:50 localhost avahi-daemon[2695]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.100.
Aug 27 22:38:51 localhost avahi-daemon[2695]: New relevant interface wlan0.IPv4 for mDNS.
Aug 27 22:38:51 localhost avahi-daemon[2695]: Network interface enumeration completed.
Aug 27 22:38:52 localhost avahi-daemon[2695]: Registering new address record for fe80::20c:41ff:fe64:6108 on wlan0.*.
Aug 27 22:38:52 localhost avahi-daemon[2695]: Registering new address record for 192.168.1.100 on wlan0.IPv4.
Aug 27 22:38:52 localhost avahi-daemon[2695]: Registering HINFO record with values 'I686'/'LINUX'.
Aug 27 22:38:52 localhost avahi-daemon[2695]: Server startup complete. Host name is linux.local. Local service cookie is 3293304112.
Aug 27 22:38:52 localhost avahi-daemon[2695]: Service "SFTP File Transfer on linux" (/services/sftp-ssh.service) successfully established.
Aug 27 22:38:53 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:38:55 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:38:56 localhost smartd[2865]: smartd version 5.37 [i386-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Aug 27 22:38:57 localhost smartd[2865]: Home page is http://smartmontools.sourceforge.net/
Aug 27 22:38:57 localhost smartd[2865]: Opened configuration file /etc/smartd.conf
Aug 27 22:38:57 localhost smartd[2865]: Configuration file /etc/smartd.conf parsed.
Aug 27 22:38:57 localhost smartd[2865]: Device: /dev/sdb, opened
Aug 27 22:38:57 localhost smartd[2865]: Device: /dev/sdb, found in smartd database.
Aug 27 22:38:57 localhost smartd[2865]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list.
Aug 27 22:38:57 localhost smartd[2865]: Device: /dev/sda, opened
Aug 27 22:38:57 localhost smartd[2865]: Device: /dev/sda, found in smartd database.
Aug 27 22:38:57 localhost smartd[2865]: Device: /dev/sda, is SMART capable. Adding to "monitor" list.
Aug 27 22:38:57 localhost smartd[2865]: Monitoring 2 ATA and 0 SCSI devices
Aug 27 22:38:57 localhost smartd[2867]: smartd has fork()ed into background mode. New PID=2867.
Aug 27 22:38:58 localhost pcscd: winscard.c:219:SCardConnect() Reader E-Gate 0 0 Not Found
Aug 27 22:38:58 localhost last message repeated 3 times
Aug 27 22:39:00 localhost kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Aug 27 22:39:00 localhost kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
Aug 27 22:39:00 localhost kernel: agpgart: Putting AGP V3 device at 0000:02:00.0 into 4x mode
Aug 27 22:39:00 localhost kernel: [drm] Setting GART location based on new memory map
Aug 27 22:39:00 localhost kernel: [drm] Loading R300 Microcode
Aug 27 22:39:00 localhost kernel: [drm] writeback test succeeded in 1 usecs
Aug 27 22:39:00 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:39:35 localhost last message repeated 7 times
Aug 27 22:39:45 localhost last message repeated 2 times
Aug 27 22:39:46 localhost gconfd (Manu-3107): démarrage (version 2.18.0.1), pid 3107 utilisateur « Manu »
Aug 27 22:39:46 localhost gconfd (Manu-3107): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Aug 27 22:39:46 localhost gconfd (Manu-3107): Adresse « xml:readwrite:/home/Manu/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Aug 27 22:39:46 localhost gconfd (Manu-3107): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Aug 27 22:39:49 localhost kernel: UDF-fs: Partition marked readonly; forcing readonly mount
Aug 27 22:39:49 localhost kernel: UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume '7893', timestamp 2006/09/26 15:25 (1078)
Aug 27 22:39:50 localhost hald: mounted /dev/scd0 on behalf of uid 500
Aug 27 22:39:50 localhost gconfd (Manu-3107): Adresse « xml:readwrite:/home/Manu/.gconf » résolue vers une source de configuration accessible en écriture à la position 0
Aug 27 22:39:50 localhost pcscd: winscard.c:219:SCardConnect() Reader E-Gate 0 0 Not Found
Aug 27 22:39:50 localhost last message repeated 4 times
Aug 27 22:39:50 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:40:25 localhost last message repeated 7 times
Aug 27 22:41:30 localhost last message repeated 13 times
Aug 27 22:42:35 localhost last message repeated 13 times
Aug 27 22:43:35 localhost last message repeated 12 times
Aug 27 22:43:40 localhost upsd[2398]: Can't connect to UPS [mgeups] (mgeups): No such file or directory
Aug 27 22:43:40 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:43:50 localhost last message repeated 2 times
Aug 27 22:43:50 localhost upsmon[2402]: UPS mgeups@localhost is unavailable
Aug 27 22:43:50 localhost wall[3361]: wall: user nut broadcasted 1 lines (37 chars)
Aug 27 22:43:55 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:44:30 localhost last message repeated 7 times
Aug 27 22:45:35 localhost last message repeated 13 times
Aug 27 22:46:40 localhost last message repeated 13 times
Aug 27 22:47:45 localhost last message repeated 13 times
Aug 27 22:48:35 localhost last message repeated 10 times
Aug 27 22:48:40 localhost upsd[2398]: Can't connect to UPS [mgeups] (mgeups): No such file or directory
Aug 27 22:48:40 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:48:55 localhost last message repeated 3 times
Aug 27 22:48:55 localhost upsmon[2402]: UPS mgeups@localhost is unavailable
Aug 27 22:48:55 localhost wall[3409]: wall: user nut broadcasted 1 lines (37 chars)
Aug 27 22:49:00 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:49:35 localhost last message repeated 7 times
Aug 27 22:50:40 localhost last message repeated 13 times
Aug 27 22:51:45 localhost last message repeated 13 times
Aug 27 22:52:45 localhost last message repeated 12 times
Aug 27 22:52:50 localhost gconfd (root-3449): démarrage (version 2.18.0.1), pid 3449 utilisateur « root »
Aug 27 22:52:50 localhost gconfd (root-3449): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Aug 27 22:52:50 localhost gconfd (root-3449): Adresse « xml:readwrite:/root/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Aug 27 22:52:50 localhost gconfd (root-3449): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Aug 27 22:52:50 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:53:25 localhost last message repeated 7 times
Aug 27 22:53:35 localhost last message repeated 2 times
Aug 27 22:53:40 localhost upsd[2398]: Can't connect to UPS [mgeups] (mgeups): No such file or directory
Aug 27 22:53:40 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:54:00 localhost last message repeated 4 times
Aug 27 22:54:00 localhost upsmon[2402]: UPS mgeups@localhost is unavailable
Aug 27 22:54:00 localhost wall[3453]: wall: user nut broadcasted 1 lines (37 chars)
Aug 27 22:54:05 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:54:40 localhost last message repeated 7 times
Aug 27 22:55:45 localhost last message repeated 13 times
Aug 27 22:56:50 localhost last message repeated 13 times
Aug 27 22:57:55 localhost last message repeated 13 times
Aug 27 22:58:35 localhost last message repeated 8 times
Aug 27 22:58:40 localhost upsd[2398]: Can't connect to UPS [mgeups] (mgeups): No such file or directory
Aug 27 22:58:40 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:59:05 localhost last message repeated 5 times
Aug 27 22:59:05 localhost upsmon[2402]: UPS mgeups@localhost is unavailable
Aug 27 22:59:05 localhost wall[3468]: wall: user nut broadcasted 1 lines (37 chars)
Aug 27 22:59:10 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 22:59:45 localhost last message repeated 7 times
Aug 27 23:00:50 localhost last message repeated 13 times
Aug 27 23:01:55 localhost last message repeated 13 times
Aug 27 23:02:15 localhost last message repeated 4 times
Aug 27 23:02:20 localhost gconfd (root-3449): Le serveur GConf n'est pas en cours d'utilisation, arrêt.
Aug 27 23:02:20 localhost gconfd (root-3449): Sortie
Aug 27 23:02:20 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 23:02:50 localhost last message repeated 6 times
Aug 27 23:02:54 localhost gconfd (root-3489): démarrage (version 2.18.0.1), pid 3489 utilisateur « root »
Aug 27 23:02:54 localhost gconfd (root-3489): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Aug 27 23:02:54 localhost gconfd (root-3489): Adresse « xml:readwrite:/root/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Aug 27 23:02:54 localhost gconfd (root-3489): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Aug 27 23:02:55 localhost upsmon[2402]: Poll UPS [mgeups@localhost] failed - Driver not connected
Aug 27 23:03:30 localhost last message repeated 7 times